CRSI – PDF Standards Store

CRSI DesignChecklistSuite 2023

Sun, 20 Oct 2024 08:34:29 +0000

his suite contains all 13 Design Checklists packaged in a complimentary 3-ring binder. An insert to hold the download cards for the accompanying calculation spreadsheets is also included. Please see individual products for descriptions. Based on the CRSI Design Guide on ACI 318-19, the CRSI Design Checklists are easy-to-use lists of essential items that must be completed when designing and detailing steel reinforced concrete structural members in accordance with the 2019 edition of the ACI 318 Building Code. The Checklists assure that all requirements for a specific structural member, which are scattered throughout the Code, are addressed and not inadvertently skipped or forgotten. This is vitally important for design professionals not familiar with the intricacies code or with the many revisions that typically occur in a given code cycle. The Checklists can be used to efficiently verify calculations or construction documents or can be employed as a step-by-step design procedure for a given structural member. Each Checklist contains the code-prescribed requirements and section numbers along with auxiliary information on how to correctly interpret and apply the requirements. Calculators, in the form of spreadsheets, are provided for each Checklist, which expedite the overall checking procedure.* In addition to design professionals, university professors and students will find the Checklists to be useful learning tools in the classroom. The Checklists are also valuable resources for individuals studying for licensing exams, building officials, and plan checkers. Printed on synthetic paper for durability.

PDF Catalog

PDF Pages	PDF Title
1	Design Checklist for SRC Beams
9	Design Checklist for SRC Diaphragms
15	Design Checklist for SRC Flat Plate Systems
27	Design Checklist for SRC One-Way Slabs
31	Design Checklist for SRC Columns
37	Design Checklist for SRC Joints
45	Design Checklist for SRC Walls
53	Design Checklist for SRC Intermediate Moment Frames
73	Design Checklist for SRC Special Moment Frames
97	Design Checklist for SRC Special Structural Walls
117	Design Checklist for SRC Members Not Part of the SFRS
125	Design Checklist for SRC Deep Foundations
133	Design Checklist for SRC Shallow Foundations
145	Design Checklist Spreadsheet Calculators Links

CRSI DesignChecklistWalls 2023

Sun, 20 Oct 2024 08:34:29 +0000

CRSI Design Checklist Walls

Published By	Publication Date	Number of Pages
CRSI	2023

CRSI ManualStandardPractice 30thEd 2023

Sun, 20 Oct 2024 08:34:29 +0000

Since 1939, the Manual of Standard Practice has presented recommendations and reported industry best practices covering the design, estimating, detailing, fabrication and placing of steel reinforcing bars in concrete construction. The 30th edition includes: Expanded coverage pertaining to material descriptions, detailing, fabrication and placing of specialty reinforcing bars (Epoxy-coated, Galvanized, Dual-coated, Stainless-steel, Low-Carbon Chromium) Updated notes and recommendations for the Architect/ Engineer Additional guidance regarding specifying, detailing, and estimating of Welded Wire Reinforcement Updated and expanded bar markings for reinforcing bars produced in the U.S. Revised chapters on Industry Contract Concepts and Sustainability

PDF Catalog

PDF Pages	PDF Title
3	Preface
5	Contents
11	CHAPTER 1 Material Specifications for Reinforcing Bar 1.1 Introduction 1.2 Reinforcing Bars 1.3 ACI 318 Code – Requirements for Reinforcing Bars 1.4 Specialty Reinforcing Bars
14	1.5 Spiral Reinforcement 1.6 Welding of Reinforcing Bars
15	1.7 Rust 1.8 Identification Marks*—ASTM Standard Reinforcing Bars
17	CHAPTER 2 Welded Wire Reinforcement (WWR) 2.1 Introduction 2.2 ASTM Specifications 2.3 WWR Style Identification 2.4 Specifying Welded Wire Reinforcement 2.5 Detailing Welded Wire Reinforcement (WWR)
18	2.6 ASTM Specification for Epoxy-Coated Wire and Welded Wire Reinforcement 2.7 ASTM Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement 2.8 ASTM Specification for Stainless Steel Welded Wire Reinforcement 2.9 Rust 2.10 Handling, Shipping and Unloading
23	CHAPTER 3 Supports for Reinforcement (Bar Supports) 3.1 Introduction 3.2 Side-Form Spacers
24	3.3 Recommendations for Bar Supports
29	3.4 Placing Bar Supports
30	3.5 One-Way Solid Slabs
31	3.6 Joists 3.7 Beams and Girders
32	3.8 Sequence of Placing Bar Supports and Reinforcing Bars in Two-Way Flat Plate
33	3.9 Sequence of Placing Bar Supports and Reinforcing Bars in Two-Way Flat Slab
34	3.10 Sequence of Placing Bar Supports and Reinforcing Bars in Two-Way Waffle Flat Slab 3.11 Bar Supports for Special Conditions
37	3.12 Bar Supports for Highway Bridge Slab Reinforcement
41	CHAPTER 4 Notes and Recommendations to the Architect/Engineer 4.1 Introduction 4.2 Recommended Industry Practices 4.3 Sizes of Reinforcing Bars and Spirals
42	4.4 Grade or Minimum Yield Strength Designation 4.5 Standard Notation 4.6 Project Drawings
43	4.7 Length of Reinforcing Bars 4.8 Beams and Girders
44	4.9 Joist Construction 4.10 Flat Plates and Flat Slabs 4.11 Post-Tensioned Beams and Slabs 4.12 Falsework and Form Reuse 4.13 Columns
45	4.14 Structural Integrity 4.15 Splices
46	4.16 Designing with Specialty Reinforcing Bars 4.17 Fabrication of Reinforcing Bars 4.18 Placing Drawings 4.19 Special Services and Items 4.20 Field Cutting of Reinforcing Bars
53	CHAPTER 5 Recommended Industry Practice for Estimating Reinforcing Materials and Services 5.1 Introduction 5.2 Scope 5.3 General 5.4 Fabrication 5.5 Extras
55	5.6 Radial Prefabrication (Bend Type 109) 5.7 Standard Hooks 5.8 Splicing of Bars 5.9 Bar Dimensions, Extensions and Cut-Offs
57	5.10 Spacers for Spiral Reinforcement 5.11 Temperature-Shrinkage Reinforcement 5.12 Slabs, Walls, Mats, or Footings Bar Spacing 5.13 Joists Adjoining Beams or Walls 5.14 Corner Bars 5.15 Bar Supports
58	5.16 Side-Form Spacers 5.17 Welded Plain or Deformed Wire Reinforcement 5.18 Post-Tensioned Construction 5.19 Placing Facilitation
59	CHAPTER 6 Recommended Industry Practice for Detailing Concrete Reinforcing Steel 6.1 Introduction 6.2 Technical Service by Seller 6.3 Detailer Responsibilities
64	6.4 Placing Drawings
68	6.5 Miscellaneous Detailing Practices
83	6.6 Detailing for Specialty Reinforcing Bars 6.7 3D Modeling and BIM
87	CHAPTER 7 Recommended Industry Practices for Fabrication of Concrete Reinforcing Steel 7.1 Introduction 7.2 Typical Bend Shapes 7.3 Guidelines for Typical Bend Shapes
100	7.4 Bend Diameters
102	7.5 Typical Measuring Points
105	7.6 Standard Fabricating Tolerances
107	7.7 Bend Curvature
108	7.8 Special Bend Shapes 7.9 Bending 7.10 Quality and Inspection
109	7.11 Typical Bundling and Tagging 7.12 Special Bundling and Tagging 7.13 Typical Fabrication 7.14 Special Fabrication
110	7.15 Radial Prefabrication (Bend Type 109) 7.16 Spirals (Bend Types 400 to 405)
111	7.17 Shipment Considerations 7.18 Extra Work or Materials 7.19 Special Services
112	7.20 Special Items 7.21 Fabrication for Specialty Reinforcing Bars
117	CHAPTER 8 Recommended Industry Practice for Placing Reinforcing Bars 8.1 Introduction 8.2 Fusion Welding of Reinforcing Bars 8.3 Surface Condition of Reinforcing Bars 8.4 Field Alignment and Re-alignment of Reinforcing Bars
118	8.5 Spacing of Reinforcing Bars 8.6 Splices in Reinforcing Bars
119	8.7 Embedment and Extensions 8.8 Tolerances in Placement
120	8.9 Supports for Reinforcement (Bar Supports) 8.10 Concrete Protection for ReinforcingBars
121	8.11 Field Cutting of Reinforcing Bars 8.12 Handling and Storage
122	8.13 Tying
123	8.14 Field Bending
125	CHAPTER 9 Industry Contract Concepts 9.1 Preface 9.2 Material Supply Contract
127	9.3 Material Supply and Installation Contract
129	CHAPTER 10 Notes on Concrete Joist and Voided Concrete Slab Construction 10.1 Concrete Joist Construction 10.2 Voided Concrete Slab Construction
131	CHAPTER 11 Highways and Bridges 11.1 Introduction 11.2 Corrosion Protection of the Reinforcement 11.3 Bridge Decks 11.4 Bridge Railings, Sidewalks, Barrier Walls, and Medians 11.5 Bridge Approach Slabs 11.6 Bridge Abutments
132	11.7 Bridge Bents 11.8 Retaining Walls 11.9 Sound Walls 11.10 Sign and Light Pole Foundations 11.11 Drainage Structures 11.12 Pavements
135	CHAPTER 12 Sustainability 12.1 Introduction 12.2 Definition 12.3 Keys to Reinforced Concrete Sustainability 12.4 Industry Position
136	12.5 Product Category Rules and Environmental Product Declaration 12.6 A Focus on Global Warming Potential
139	APPENDIX A U.S. Manufacturers of Steel Reinforcing Bars for Concrete Construction
151	Non-Member Manufacturers Contact Information for CRSI Member Mills
155	APPENDIX B Legacy Bar Bends
157	Standard Hooks
159	APPENDIX C Notes on Metrication C.1 Metric Units C.2 Orders of Magnitude C.3 Rules for Writing Metric Symbols and Names C.4 Rules for Writing Numbers
160	C.5 Rules for Linear Measurement C.6 Rules for Area C.7 Rules for Volume and Fluid Capacity C.8 Rules for Civil and Structural Engineering C.9 Drawing Scales
161	C.10 Metric Units Used on Drawings C.11 Drawing Sizes C.12 Rounding and Conversion C.13 Physical and Mental Metric Guide C.14 Reinforcing Bar Sizes and Grades
162	C.15 References
163	APPENDIX D References
165	GLOSSARY
189	INDEX
193	Notes

CRSI DesignChecklistSpecialStructuralWalls 2023

Sun, 20 Oct 2024 08:34:28 +0000

CRSI Design Checklist Special Structural Walls

Published By	Publication Date	Number of Pages
CRSI	2023	21

CRSI DesignChecklistSpecialMomentFrames 2023

Sun, 20 Oct 2024 08:34:27 +0000

CRSI Design Checklist Special Moment Frames

Published By	Publication Date	Number of Pages
CRSI	2023	25

CRSI DesignChecklistShallowFoundations 2023

Sun, 20 Oct 2024 08:34:25 +0000

CRSI Design Checklist Shallow Foundations

Published By	Publication Date	Number of Pages
CRSI	2023	13

CRSI DesignChecklistJoints 2023

Sun, 20 Oct 2024 08:34:23 +0000

CRSI Design Checklist Joints

Published By	Publication Date	Number of Pages
CRSI	2023

CRSI DesignChecklistFlatPlates 2023

Sun, 20 Oct 2024 08:34:23 +0000

CRSI Design Checklist Flat Plates

Published By	Publication Date	Number of Pages
CRSI	2023

CRSI DesignChecklistDiaphragms 2023

Sun, 20 Oct 2024 08:34:23 +0000

CRSI Design Checklist Diaphragms

Published By	Publication Date	Number of Pages
CRSI	2023	7

CRSI DesignChecklistOne WaySlabs 2023

Sun, 20 Oct 2024 08:34:23 +0000

CRSI Design Checklist One-Way Slabs

Published By	Publication Date	Number of Pages
CRSI	2023