{"id":211547,"date":"2024-10-19T13:41:10","date_gmt":"2024-10-19T13:41:10","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/icc-ipc-2021-1stptg\/"},"modified":"2024-10-25T06:29:35","modified_gmt":"2024-10-25T06:29:35","slug":"icc-ipc-2021-1stptg","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/icc\/icc-ipc-2021-1stptg\/","title":{"rendered":"ICC IPC 2021 1stptg"},"content":{"rendered":"

The 2021 IPC\u00ae provides minimum regulations for plumbing facilities and provides for the acceptance of new and innovative products, materials, and systems. In October 2019, the Code Council released an independent study comparing model plumbing codes. Important changes in the 2021 IPC include: Multiple-user toilet facilities to serve all genders are now permitted. Two new methods for relining\/rehabilitation of existing sewers are added. Accommodations for mounted roof top solar panels over vent terminals is added. CSA B805\/ICC 805 Rainwater Harvesting Systems is allowed as an alternative design method. Plumbing provisions from ICC A117.1-2017 Standard for Usable and Accessible Buildings and Facilities are now included.<\/p>\n

PDF Catalog<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
PDF Pages<\/th>\nPDF Title<\/th>\n<\/tr>\n
1<\/td>\n2021 IPC\u00ae INTERNATIONAL PLUMBING CODE\u00ae <\/td>\n<\/tr>\n
2<\/td>\n2021 IPC\u00ae INTERNATIONAL PLUMBING CODE\u00ae TITLE PAGE <\/td>\n<\/tr>\n
3<\/td>\nCOPYRIGHT <\/td>\n<\/tr>\n
4<\/td>\nPREFACE <\/td>\n<\/tr>\n
10<\/td>\nARRANGEMENT AND FORMAT OF THE 2021 IPC <\/td>\n<\/tr>\n
14<\/td>\nTABLE OF CONTENTS <\/td>\n<\/tr>\n
18<\/td>\nCHAPTER 1 SCOPE AND ADMINISTRATION
PART 1\u2014SCOPE AND APPLICATION
SECTION 101 SCOPE AND GENERAL REQUIREMENTS
SECTION 102 APPLICABILITY <\/td>\n<\/tr>\n
19<\/td>\nPART 2\u2014ADMINISTRATION AND ENFORCEMENT
SECTION 103 CODE COMPLIANCE AGENCY
SECTION 104 DUTIES AND POWERS OF THE CODE OFFICIAL <\/td>\n<\/tr>\n
20<\/td>\nSECTION 105 APPROVAL
SECTION 106 PERMITS <\/td>\n<\/tr>\n
22<\/td>\nSECTION 107 TEMPORARY EQUIPMENT, SYSTEMS AND USES
SECTION 108 INSPECTIONS AND TESTING <\/td>\n<\/tr>\n
23<\/td>\nSECTION 109 FEES
SECTION 110 CONSTRUCTION DOCUMENTS <\/td>\n<\/tr>\n
24<\/td>\nSECTION 111 NOTICE OF APPROVAL
SECTION 112 SERVICE UTILITIES
SECTION 113 STOP WORK ORDER
SECTION 114 MEANS OF APPEALS <\/td>\n<\/tr>\n
25<\/td>\nSECTION 115 VIOLATIONS <\/td>\n<\/tr>\n
26<\/td>\nCHAPTER 2 DEFINITIONS
SECTION 201 GENERAL
SECTION 202 GENERAL DEFINITIONS <\/td>\n<\/tr>\n
34<\/td>\nCHAPTER 3 GENERAL REGULATIONS
SECTION 301 GENERAL
SECTION 302 EXCLUSION OF MATERIALS DETRIMENTAL TO THE SEWER SYSTEM
SECTION 303 MATERIALS <\/td>\n<\/tr>\n
35<\/td>\nSECTION 304 RODENTPROOFING
SECTION 305 PROTECTION OF PIPES AND PLUMBING SYSTEM COMPONENTS
SECTION 306 TRENCHING, EXCAVATION AND BACKFILL <\/td>\n<\/tr>\n
36<\/td>\nSECTION 307 STRUCTURAL SAFETY
SECTION 308 PIPING SUPPORT <\/td>\n<\/tr>\n
37<\/td>\nTABLE 308.5 HANGER SPACIN
SECTION 309 FLOOD HAZARD RESISTANCE <\/td>\n<\/tr>\n
38<\/td>\nSECTION 310 WASHROOM AND TOILET ROOM REQUIREMENTS
SECTION 311 TOILET FACILITIES FOR WORKERS
SECTION 312 TESTS AND INSPECTIONS <\/td>\n<\/tr>\n
39<\/td>\nSECTION 313 EQUIPMENT EFFICIENCIES
SECTION 314 CONDENSATE DISPOSAL
[M] TABLE 314.2.2 CONDENSATE DRAIN S <\/td>\n<\/tr>\n
40<\/td>\nSECTION 315 PENETRATIONS
SECTION 316 ALTERNATIVE ENGINEERED DESIGN <\/td>\n<\/tr>\n
42<\/td>\nCHAPTER 4 FIXTURES, FAUCETS AND FIXTURE FITTINGS
SECTION 401 GENERAL
SECTION 402 FIXTURE MATERIALS
SECTION 403 MINIMUM PLUMBING FACILITIES
TABLE 403.1 MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2) <\/td>\n<\/tr>\n
43<\/td>\nTABLE 403.1\u2014continued MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2) <\/td>\n<\/tr>\n
44<\/td>\nTABLE 403.1\u2014continued MINIMUM NUMBER OF REQUIRED PLUMBING FIXTURESa (See Sections 403.1.1 and 403.2) <\/td>\n<\/tr>\n
46<\/td>\nSECTION 404 ACCESSIBLE PLUMBING FACILITIES
SECTION 405 INSTALLATION OF FIXTURES <\/td>\n<\/tr>\n
48<\/td>\nSECTION 406 AUTOMATIC CLOTHES WASHERS
SECTION 407 BATHTUBS
SECTION 408 BIDETS
SECTION 409 DISHWASHING MACHINES
SECTION 410 DRINKING FOUNTAINS <\/td>\n<\/tr>\n
49<\/td>\nSECTION 411 EMERGENCY SHOWERS AND EYEWASH STATIONS
SECTION 412 FAUCETS AND FIXTURE FITTINGS <\/td>\n<\/tr>\n
50<\/td>\nSECTION 413 FLOOR AND TRENCH DRAINS
SECTION 414 FLOOR SINKS
SECTION 415 FLUSHING DEVICES FOR WATER CLOSETS AND URINALS <\/td>\n<\/tr>\n
51<\/td>\nSECTION 416 FOOD WASTE DISPOSER UNITS
SECTION 417 GARBAGE CAN WASHERS
SECTION 418 LAUNDRY TRAYS
SECTION 419 LAVATORIES
SECTION 420 MANUAL FOOD AND BEVERAGE DISPENSING EQUIPMENT
SECTION 421 SHOWERS <\/td>\n<\/tr>\n
53<\/td>\nSECTION 422 SINKS
SECTION 423 SPECIALTY PLUMBING FIXTURES
SECTION 424 URINALS
SECTION 425 WATER CLOSETS
SECTION 426 WHIRLPOOL BATHTUBS <\/td>\n<\/tr>\n
54<\/td>\nCHAPTER 5 WATER HEATERS
SECTION 501 GENERAL
SECTION 502 INSTALLATION <\/td>\n<\/tr>\n
55<\/td>\nSECTION 503 CONNECTIONS
SECTION 504 SAFETY DEVICES <\/td>\n<\/tr>\n
56<\/td>\nSECTION 505 INSULATION <\/td>\n<\/tr>\n
58<\/td>\nCHAPTER 6 WATER SUPPLY AND DISTRIBUTION
SECTION 601 GENERAL
SECTION 602 WATER REQUIRED <\/td>\n<\/tr>\n
59<\/td>\nSECTION 603 WATER SERVICE
SECTION 604 DESIGN OF BUILDING WATER DISTRIBUTION SYSTEM
TABLE 604.3 WATER DISTRIBUTION SYSTEM DESIGN CRITERIA REQUIRED CAPACITY AT FIXTURE SUPPLY PIPE OUTLETS <\/td>\n<\/tr>\n
60<\/td>\nTABLE 604.4 MAXIMUM FLOW RATES AND CONSUMPTION FOR PLUMBING FIXTURES AND FIXTURE FITTINGS
TABLE 604.5 MINIMUM SIZES OF FIXTURE WATER SUPPLY PIPES <\/td>\n<\/tr>\n
61<\/td>\nTABLE 604.10.1 MANIFOLD SIZING
SECTION 605 MATERIALS, JOINTS AND CONNECTIONS
TABLE 605.3 WATER SERVICE PIPE <\/td>\n<\/tr>\n
62<\/td>\nTABLE 605.4 WATER DISTRIBUTION PIPE
TABLE 605.7 VALVES <\/td>\n<\/tr>\n
63<\/td>\nTABLE 605.5 PIPE FITTINGS
TABLE 605.8 MANUFACTURED PIPE NIPPLES <\/td>\n<\/tr>\n
66<\/td>\nSECTION 606 INSTALLATION OF THE BUILDING WATER DISTRIBUTION SYSTEM <\/td>\n<\/tr>\n
67<\/td>\nTABLE 606.5.4 SIZES FOR OVERFLOW PIPES FOR WATER SUPPLY TANKS
TABLE 606.5.7 SIZE OF DRAIN PIPES FOR WATER TANKS
SECTION 607 HOT WATER SUPPLY SYSTEM <\/td>\n<\/tr>\n
68<\/td>\nSECTION 608 PROTECTION OF POTABLE WATER SUPPLY <\/td>\n<\/tr>\n
69<\/td>\nTABLE 608.1 APPLICATION OF BACKFLOW PREVENTERS <\/td>\n<\/tr>\n
70<\/td>\nFIGURE 608.9.1 PICTOGRAPH\u2014DO NOT DRINK <\/td>\n<\/tr>\n
71<\/td>\nTABLE 608.9.2.2 SIZE OF PIPE IDENTIFICATION <\/td>\n<\/tr>\n
72<\/td>\nTABLE 608.16.1 MINIMUM REQUIRED AIR GAPS <\/td>\n<\/tr>\n
74<\/td>\nTABLE 608.18.1 DISTANCE FROM CONTAMINATION TO PRIVATE WATER SUPPLIES AND PUMP SUCTION LINES
SECTION 609 HEALTH CARE PLUMBING <\/td>\n<\/tr>\n
75<\/td>\nSECTION 610 DISINFECTION OF POTABLE WATER SYSTEM
SECTION 611 DRINKING WATER TREATMENT UNITS
SECTION 612 SOLAR SYSTEMS
SECTION 613 TEMPERATURE CONTROL DEVICES AND VALVES <\/td>\n<\/tr>\n
76<\/td>\nCHAPTER 7 SANITARY DRAINAGE
SECTION 701 GENERAL
SECTION 702 MATERIALS
TABLE 702.1 ABOVE-GROUND DRAINAGE AND VENT PIPE <\/td>\n<\/tr>\n
77<\/td>\nTABLE 702.2 UNDERGROUND BUILDING DRAINAGE AND VENT PIPE
TABLE 702.3 BUILDING SEWER PIPE <\/td>\n<\/tr>\n
78<\/td>\nTABLE 702.4 PIPE FITTINGS
SECTION 703 BUILDING SEWER
SECTION 704 DRAINAGE PIPING INSTALLATION
TABLE 704.1 SLOPE OF HORIZONTAL DRAINAGE PIPE <\/td>\n<\/tr>\n
79<\/td>\nSECTION 705 JOINTS <\/td>\n<\/tr>\n
81<\/td>\nTABLE 705.18 CAULKING FERRULE SPECIFICATIONS
TABLE 705.19 SOLDERING BUSHING SPECIFICATIONS
SECTION 706 CONNECTIONS BETWEEN DRAINAGE PIPING AND FITTINGS <\/td>\n<\/tr>\n
82<\/td>\nTABLE 706.3 FITTINGS FOR CHANGE IN DIRECTION
SECTION 707 PROHIBITED JOINTS AND CONNECTIONS
SECTION 708 CLEANOUTS <\/td>\n<\/tr>\n
83<\/td>\nSECTION 709 FIXTURE UNITS
TABLE 709.2 DRAINAGE FIXTURE UNITS FOR FIXTURE DRAINS OR TRAPS <\/td>\n<\/tr>\n
84<\/td>\nTABLE 709.1 DRAINAGE FIXTURE UNITS FOR FIXTURES AND GROUPS <\/td>\n<\/tr>\n
85<\/td>\nSECTION 710 DRAINAGE SYSTEM SIZING
TABLE 710.1(1) BUILDING DRAINS AND SEWERS
TABLE 710.1(2) HORIZONTAL FIXTURE BRANCHES AND STACKSa
SECTION 711 OFFSETS IN DRAINAGE PIPING IN BUILDINGS OF FIVE STORIES OR MORE <\/td>\n<\/tr>\n
86<\/td>\nSECTION 712 SUMPS AND EJECTORS <\/td>\n<\/tr>\n
87<\/td>\nTABLE 712.4.2 MINIMUM CAPACITY OF SEWAGE PUMP OR SEWAGE EJECTOR
SECTION 713 COMPUTERIZED DRAINAGE DESIGN
SECTION 714 BACKWATER VALVES
SECTION 715 VACUUM DRAINAGE SYSTEMS
SECTION 716 REPLACEMENT OF UNDERGROUND BUILDING SEWERS AND BUILDING DRAINS BY PIPE-BURSTING METHODS <\/td>\n<\/tr>\n
88<\/td>\nSECTION 717 RELINING BUILDING SEWERS AND BUILDING DRAINS
SECTION 718 REHABILITATION OF BUILDING SEWERS AND BUILDING DRAINS <\/td>\n<\/tr>\n
90<\/td>\nCHAPTER 8 INDIRECT\/SPECIAL WASTE
SECTION 801 GENERAL
SECTION 802 INDIRECT WASTES <\/td>\n<\/tr>\n
91<\/td>\nSECTION 803 SPECIAL WASTES <\/td>\n<\/tr>\n
92<\/td>\nCHAPTER 9 VENTS
SECTION 901 GENERAL
SECTION 902 MATERIALS
SECTION 903 VENT TERMINALS <\/td>\n<\/tr>\n
93<\/td>\nSECTION 904 OUTDOOR VENT EXTENSIONS
SECTION 905 VENT CONNECTIONS AND GRADES
SECTION 906 VENT PIPE SIZING <\/td>\n<\/tr>\n
94<\/td>\nTABLE 906.1 SIZE AND DEVELOPED LENGTH OF STACK VENTS AND VENT STACKS <\/td>\n<\/tr>\n
95<\/td>\nTABLE 906.5.1 SIZE AND LENGTH OF SUMP VENTS
SECTION 907 VENTS FOR STACK OFFSETS
SECTION 908 RELIEF VENTS\u2014STACKS OF MORE THAN 10 BRANCH INTERVALS <\/td>\n<\/tr>\n
96<\/td>\nSECTION 909 FIXTURE VENTS
TABLE 909.1 MAXIMUM DISTANCE OF FIXTURE TRAP FROM VENT
SECTION 910 INDIVIDUAL VENT
SECTION 911 COMMON VENT
TABLE 911.3 COMMON VENT SIZES
SECTION 912 WET VENTING <\/td>\n<\/tr>\n
97<\/td>\nTABLE 912.3 WET VENT SIZE
SECTION 913 WASTE STACK VENT
TABLE 913.4 WASTE STACK VENT SIZE
SECTION 914 CIRCUIT VENTING <\/td>\n<\/tr>\n
98<\/td>\nSECTION 915 COMBINATION WASTE AND VENT SYSTEM
TABLE 915.2.2 SIZE OF COMBINATION WASTE AND VENT PIPE
SECTION 916 ISLAND FIXTURE VENTING
SECTION 917 SINGLE-STACK VENT SYSTEM <\/td>\n<\/tr>\n
99<\/td>\nTABLE 917.2 SINGLE STACK SIZE
SECTION 918 AIR ADMITTANCE VALVES <\/td>\n<\/tr>\n
100<\/td>\nSECTION 919 ENGINEERED VENT SYSTEMS
TABLE 919.2 MINIMUM DIAMETER AND MAXIMUM LENGTH OF INDIVIDUAL BRANCH FIXTURE VENTS AND INDIVIDUAL FIXTURE HEADER VENTS FOR SMOOTH PIPES
EQUATION 9-1
SECTION 920 COMPUTERIZED VENT DESIGN <\/td>\n<\/tr>\n
102<\/td>\nCHAPTER 10 TRAPS, INTERCEPTORS AND SEPARATORS
SECTION 1001 GENERAL
SECTION 1002 TRAP REQUIREMENTS <\/td>\n<\/tr>\n
103<\/td>\nSECTION 1003 INTERCEPTORS AND SEPARATORS <\/td>\n<\/tr>\n
104<\/td>\nTABLE 1003.3.5.1 CAPACITY OF GREASE INTERCEPTORS <\/td>\n<\/tr>\n
105<\/td>\nSECTION 1004 MATERIALS, JOINTS AND CONNECTIONS <\/td>\n<\/tr>\n
106<\/td>\nCHAPTER 11 STORM DRAINAGE
SECTION 1101 GENERAL
SECTION 1102 MATERIALS
TABLE 1102.4 BUILDING STORM SEWER PIPE <\/td>\n<\/tr>\n
107<\/td>\nTABLE 1102.5 SUBSOIL DRAIN PIPE
TABLE 1102.7 PIPE FITTINGS
SECTION 1103 TRAPS
SECTION 1104 CONDUCTORS AND CONNECTIONS
SECTION 1105 ROOF DRAINS <\/td>\n<\/tr>\n
108<\/td>\nSECTION 1106 SIZE OF CONDUCTORS, LEADERS AND STORM DRAINS
EQUATION 11-1
TABLE 1106.2 STORM DRAIN PIPE SIZING
TABLE 1106.3 VERTICAL LEADER SIZING <\/td>\n<\/tr>\n
109<\/td>\nFIGURE 1106.1(1) 100-YEAR, 1-HOUR RAINFALL (INCHES) WESTERN UNITED STATES <\/td>\n<\/tr>\n
110<\/td>\nFIGURE 1106.1(2) 100-YEAR, 1-HOUR RAINFALL (INCHES) CENTRAL UNITED STATES <\/td>\n<\/tr>\n
111<\/td>\nFIGURE 1106.1(3) 100-YEAR, 1-HOUR RAINFALL (INCHES) EASTERN UNITED STATES <\/td>\n<\/tr>\n
112<\/td>\nFIGURE 1106.1(4) 100-YEAR, 1-HOUR RAINFALL (INCHES) ALASKA <\/td>\n<\/tr>\n
113<\/td>\nFIGURE 1106.1(5) 100-YEAR, 1-HOUR RAINFALL (INCHES) HAWAII <\/td>\n<\/tr>\n
114<\/td>\nTABLE 1106.6 HORIZONTAL GUTTER SIZING
SECTION 1107 SIPHONIC ROOF DRAINAGE SYSTEMS
SECTION 1108 SECONDARY (EMERGENCY) ROOF DRAINS
SECTION 1109 COMBINED SANITARY AND STORM PUBLIC SEWER
SECTION 1110 CONTROLLED FLOW ROOF DRAIN SYSTEMS <\/td>\n<\/tr>\n
115<\/td>\nSECTION 1111 SUBSOIL DRAINS
SECTION 1112 BUILDING SUBDRAINS
SECTION 1113 SUMPS AND PUMPING SYSTEMS <\/td>\n<\/tr>\n
116<\/td>\nCHAPTER 12 SPECIAL PIPING AND STORAGE SYSTEMS
SECTION 1201 GENERAL
SECTION 1202 MEDICAL GASES
SECTION 1203 OXYGEN SYSTEMS <\/td>\n<\/tr>\n
118<\/td>\nCHAPTER 13 NONPOTABLE WATER SYSTEMS
SECTION 1301 GENERAL
FIGURE 1301.3 PICTOGRAPH\u2014DO NOT DRINK <\/td>\n<\/tr>\n
120<\/td>\nSECTION 1302 ON-SITE NONPOTABLE WATER REUSE SYSTEMS <\/td>\n<\/tr>\n
121<\/td>\nTABLE 1302.7.1 LOCATION OF NONPOTABLE WATER REUSE STORAGE TANKS <\/td>\n<\/tr>\n
122<\/td>\nSECTION 1303 NONPOTABLE RAINWATER COLLECTION AND DISTRIBUTION SYSTEMS <\/td>\n<\/tr>\n
123<\/td>\nTABLE 1303.10.1 LOCATION OF RAINWATER STORAGE TANKS <\/td>\n<\/tr>\n
124<\/td>\nSECTION 1304 RECLAIMED WATER SYSTEMS <\/td>\n<\/tr>\n
126<\/td>\nCHAPTER 14 SUBSURFACE GRAYWATER SOIL ABSORPTION SYSTEMS
SECTION 1401 GENERAL
SECTION 1402 SYSTEM DESIGN AND SIZING
EQUATION 14-1 <\/td>\n<\/tr>\n
127<\/td>\nTABLE 1402.3 LOCATION OF SUBSURFACE GRAYWATER SOIL ABSORPTION SYSTEM
SECTION 1403 INSTALLATION
TABLE 1403.1.1 DESIGN LOADING RATE <\/td>\n<\/tr>\n
128<\/td>\nTABLE 1403.2 DISTRIBUTION PIPE
TABLE 1403.2 DISTRIBUTION PIPE <\/td>\n<\/tr>\n
130<\/td>\nCHAPTER 15 REFERENCED STANDARDS
ANSI
ASHRAE
ASME <\/td>\n<\/tr>\n
132<\/td>\nASPE <\/td>\n<\/tr>\n
133<\/td>\nASSE <\/td>\n<\/tr>\n
135<\/td>\nASTM <\/td>\n<\/tr>\n
140<\/td>\nAWS
AWWA <\/td>\n<\/tr>\n
141<\/td>\nCISPI
CSA <\/td>\n<\/tr>\n
143<\/td>\nIAPMO <\/td>\n<\/tr>\n
144<\/td>\nICC
ISEA
MSS <\/td>\n<\/tr>\n
145<\/td>\nNFPA
NGWA
NSF <\/td>\n<\/tr>\n
146<\/td>\nPDI
PSAI
UL <\/td>\n<\/tr>\n
148<\/td>\nAPPENDIX A PLUMBING PERMIT FEE SCHEDULE
TABLE A101 EXAMPLE OF PERMIT FEE SCHEDULE
PERMIT ISSUANCE
UNIT FEE SCHEDULE
OTHER INSPECTIONS AND FEES <\/td>\n<\/tr>\n
150<\/td>\nAPPENDIX B RATES OF RAINFALL FOR VARIOUS CITIES
TABLE B101 RATES OF RAINFALL FOR VARIOUS CITIESa <\/td>\n<\/tr>\n
151<\/td>\nTABLE B101\u2014continued RATES OF RAINFALL FOR VARIOUS CITIESa <\/td>\n<\/tr>\n
152<\/td>\nTABLE B101\u2014continued RATES OF RAINFALL FOR VARIOUS CITIESa <\/td>\n<\/tr>\n
153<\/td>\nTABLE B101\u2014continued RATES OF RAINFALL FOR VARIOUS CITIESa <\/td>\n<\/tr>\n
154<\/td>\nAPPENDIX C STRUCTURAL SAFETY
SECTION C101 CUTTING, NOTCHING AND BORING IN WOOD MEMBERS <\/td>\n<\/tr>\n
156<\/td>\nAPPENDIX D DEGREE DAY AND DESIGN TEMPERATURES
TABLE D101 DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES <\/td>\n<\/tr>\n
157<\/td>\nTABLE D101\u2014continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES <\/td>\n<\/tr>\n
158<\/td>\nTABLE D101\u2014continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES <\/td>\n<\/tr>\n
159<\/td>\nTABLE D101\u2014continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES <\/td>\n<\/tr>\n
160<\/td>\nTABLE D101\u2014continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES <\/td>\n<\/tr>\n
161<\/td>\nTABLE D101\u2014continued DEGREE DAY AND DESIGN TEMPERATURESa FOR CITIES IN THE UNITED STATES <\/td>\n<\/tr>\n
162<\/td>\nAPPENDIX E SIZING OF WATER PIPING SYSTEM
SECTION E101 GENERAL
SECTION E102 INFORMATION REQUIRED
SECTION E103 SELECTION OF PIPE SIZE <\/td>\n<\/tr>\n
166<\/td>\nTABLE E103.3.1(1) SUMMATION OF DEVELOPED PIPE LENGTHS <\/td>\n<\/tr>\n
167<\/td>\nTABLE E103.3.1(2) FITTING PRESSURE LOSSES EXPRESSED IN EQUIVALENT LENGTHS
TABLE E103.3.1(3) TOTAL FRICTION LOSS EQUIVALENT PIPING LENGTH <\/td>\n<\/tr>\n
168<\/td>\nFIGURE E103.3(1) EXAMPLE\u2014SIZING <\/td>\n<\/tr>\n
169<\/td>\nTABLE E103.3(1) RECOMMENDED TABULAR ARRANGEMENT FOR USE IN SOLVING PIPE SIZING PROBLEMS <\/td>\n<\/tr>\n
170<\/td>\nTABLE E103.3(2) LOAD VALUES ASSIGNED TO FIXTURESa <\/td>\n<\/tr>\n
171<\/td>\nTABLE E103.3(3) TABLE FOR ESTIMATING DEMAND <\/td>\n<\/tr>\n
172<\/td>\nTABLE E103.3(3)\u2014continued TABLE FOR ESTIMATING DEMAND
TABLE E103.3(4) LOSS OF PRESSURE THROUGH TAPS AND TEES IN POUNDS PER SQUARE INCH (psi) <\/td>\n<\/tr>\n
173<\/td>\nTABLE E103.3(5) ALLOWANCE IN EQUIVALENT LENGTHS OF PIPE FOR FRICTION LOSS IN VALVES AND THREADED FITTINGS (feet)
TABLE E103.3(6) PRESSURE LOSS IN FITTINGS AND VALVES EXPRESSED AS EQUIVALENT LENGTH OF TUBEa (feet) <\/td>\n<\/tr>\n
174<\/td>\nFIGURE E103.3(2) FRICTION LOSS IN SMOOTH PIPEa (TYPE K, ASTM B88 COPPER TUBING) <\/td>\n<\/tr>\n
175<\/td>\nFIGURE E103.3(3) FRICTION LOSS IN SMOOTH PIPEa (TYPE L, ASTM B88 COPPER TUBING) <\/td>\n<\/tr>\n
176<\/td>\nFIGURE E103.3(4) FRICTION LOSS IN SMOOTH PIPEa (TYPE M, ASTM B88 COPPER TUBING) <\/td>\n<\/tr>\n
177<\/td>\nFIGURE E103.3(5) FRICTION LOSS IN FAIRLY SMOOTH PIPEa <\/td>\n<\/tr>\n
178<\/td>\nFIGURE E103.3(6) FRICTION LOSS IN FAIRLY ROUGH PIPEa <\/td>\n<\/tr>\n
179<\/td>\nFIGURE E103.3(7) FRICTION LOSS IN ROUGH PIPEa <\/td>\n<\/tr>\n
180<\/td>\nSECTION E104 SELECTION OF PIPE SIZE
SECTION E105 DETERMINATION OF PIPE VOLUMES <\/td>\n<\/tr>\n
181<\/td>\nTABLE E104.1 MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.) <\/td>\n<\/tr>\n
182<\/td>\nTABLE E104.1\u2014continued MINIMUM SIZE OF WATER METERS, MAINS AND DISTRIBUTION PIPING BASED ON WATER SUPPLY FIXTURE UNIT VALUES (w.s.f.u.) <\/td>\n<\/tr>\n
183<\/td>\nTABLE E105.1 INTERNAL VOLUME OF VARIOUS WATER DISTRIBUTION TUBING <\/td>\n<\/tr>\n
184<\/td>\n[A] APPENDIX F BOARD OF APPEALS
[A] SECTION F101 GENERAL <\/td>\n<\/tr>\n
186<\/td>\nINDEX <\/td>\n<\/tr>\n
198<\/td>\nRESOURCE A PLUMBING PROVISIONS EXCERPTED FROM: ICC A117.1\u20132017 STANDARD FOR ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES <\/td>\n<\/tr>\n
200<\/td>\nPLUMBING PROVISIONS EXCERPTED FROM: ICC A117.1-2017 STANDARD FOR ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES TITLE PAGE <\/td>\n<\/tr>\n
201<\/td>\nCOPYRIGHT <\/td>\n<\/tr>\n
202<\/td>\nTABLE OF CONTENTS <\/td>\n<\/tr>\n
204<\/td>\nCHAPTER 1 APPLICATION AND ADMINISTRATION
SECTION 101 TITLE
SECTION 102 PURPOSE
SECTION 103 HUMAN FACTOR PROVISIONS
SECTION 104 COMPLIANCE ALTERNATIVES
SECTION 105 CONVENTIONS
SECTION 106 REFERENCED DOCUMENTS <\/td>\n<\/tr>\n
205<\/td>\nFIGURE 105.4 GRAPHIC CONVENTION FOR FIGURES <\/td>\n<\/tr>\n
206<\/td>\nSECTION 107 DEFINITIONS <\/td>\n<\/tr>\n
210<\/td>\nCHAPTER 3 BUILDING BLOCKS
SECTION 301 GENERAL
SECTION 302 FLOOR SURFACES
FIGURE 302.2 CARPET ON FLOOR SURFACES
FIGURE 302.3 OPENINGS IN FLOOR SURFACES
FIGURE 303.2 VERTICAL CHANGE IN LEVEL
FIGURE 303.3 BEVELED CHANGES IN LEVEL
SECTION 303 CHANGES IN LEVEL <\/td>\n<\/tr>\n
211<\/td>\nSECTION 304 TURNING SPACE
FIGURE 304.3.1.1 CIRCULAR TURNING SPACE – NEW BUILDINGS SIZE AND OVERLAP
FIGURE 304.3.1.2 CIRCULAR TURNING SPACE – EXISTING BUILDINGS – SIZE AND OVERLAP
FIGURE 304.3.2.1(A) T-SHAPED TURNING SPACE NEW BUILDINGS – OPTION 1 <\/td>\n<\/tr>\n
212<\/td>\nFIGURE 304.3.2.1(B) T-SHAPED TURNING SPACE NEW BUILDINGS – OPTION 2
FIGURE 304.3.2.1(C) T-SHAPED TURNING SPACE NEW BUILDINGS – OPTION 3
FIGURE 304.3.2.1.1 T-SHAPED TURNING SPACE NEW BUILDINGS – OVERLAP <\/td>\n<\/tr>\n
213<\/td>\nFIGURE 304.3.2.2 T-SHAPED TURNING SPACE EXISTING BUILDINGS – SIZE
FIGURE 304.3.2.2.1 T-SHAPED TURNING SPACE – EXISTING BUILDINGS OVERLAP
SECTION 305 CLEAR FLOOR SPACE
FIGURE 305.3.1 SIZE OF CLEAR FLOOR SPACE – NEW BUILDINGS
FIGURE 305.3.2 SIZE OF CLEAR FLOOR SPACE – EXISTING BUILDINGS <\/td>\n<\/tr>\n
214<\/td>\nFIGURE 305.5(A) POSITION OF CLEAR FLOOR SPACE – FORWARD
FIGURE 305.5(B) POSITION OF CLEAR FLOOR SPACE – PARALLEL
FIGURE 305.7.1 MANEUVERING CLEARANCE IN AN ALCOVE PARALLEL APPROACH
FIGURE 305.7.2 MANEUVERING CLEARANCE IN AN ALCOVE FORWARD APPROACH
SECTION 306 KNEE AND TOE CLEARANCE <\/td>\n<\/tr>\n
215<\/td>\nFIGURE 306.2(A) TOE CLEARANCE – ELEVATION
FIGURE 306.2(B) TOE CLEARANCE – PLAN
FIGURE 306.3(A) KNEE CLEARANCE – ELEVATION
FIGURE 306.3(B) KNEE CLEARANCE – PLAN <\/td>\n<\/tr>\n
216<\/td>\nSECTION 307 PROTRUDING OBJECTS
FIGURE 307.2 LIMITS OF PROTRUDING OBJECTS
FIGURE 307.3(A) POST-MOUNTED PROTRUDING OBJECTS
FIGURE 307.3(B) POST-MOUNTED PROTRUDING OBJECTS <\/td>\n<\/tr>\n
217<\/td>\nFIGURE 307.4 REDUCED VERTICAL CLEARANCE
SECTION 308 REACH RANGES
FIGURE 308.2.1 UNOBSTRUCTED FORWARD REACH
FIGURE 308.2.2 OBSTRUCTED HIGH FORWARD REACH <\/td>\n<\/tr>\n
218<\/td>\nFIGURE 308.3.1 UNOBSTRUCTED SIDE REACH
FIGURE 308.3.2(A) OBSTRUCTED HIGH SIDE REACH
FIGURE 308.3.2(B) OBSTRUCTED HIGH SIDE REACH
SECTION 309 OPERABLE PARTS <\/td>\n<\/tr>\n
219<\/td>\nFIGURE 309.1 OPERABLE PARTS – EXCEPTION 3 <\/td>\n<\/tr>\n
220<\/td>\nCHAPTER 6 PLUMBING ELEMENTS AND FACILITIES
SECTION 601 GENERAL
SECTION 602 DRINKING FOUNTAINS AND BOTTLE FILLING STATIONS
FIGURE 602.2.1(A) CLEAR FLOOR SPACE AT WHEELCHAIR DRINKING FOUNTAINS
FIGURE 602.2.1(B) CLEAR FLOOR SPACE AT WHEELCHAIR DRINKING FOUNTAINS – PRIMARILY FOR CHILDREN\u2019S USE EXCEPTION
FIGURE 602.2.3 WHEELCHAIR DRINKING FOUNTAIN SPOUT HEIGHT AND LOCATION <\/td>\n<\/tr>\n
221<\/td>\nFIGURE 602.2.4 WHEELCHAIR DRINKING FOUNTAIN SPOUT LOCATION
FIGURE 602.3.2 STANDING USE DRINKING FOUNTAIN SPOUT HEIGHT AND LOCATION
FIGURE 602.3.3 STANDING USE DRINKING FOUNTAIN SPOUT LOCATION
SECTION 603 TOILET AND BATHING ROOMS <\/td>\n<\/tr>\n
222<\/td>\nTABLE 603.6 MAXIMUM REACH DEPTH AND HEIGHT
SECTION 604 WATER CLOSETS AND TOILET COMPARTMENTS
FIGURE 604.2 WATER CLOSET LOCATION <\/td>\n<\/tr>\n
223<\/td>\nFIGURE 604.3 SIZE OF CLEARANCE FOR WATER CLOSET
FIGURE 604.4 WATER CLOSET SEAT HEIGHT <\/td>\n<\/tr>\n
224<\/td>\nFIGURE 604.5.1 SIDE-WALL GRAB BAR FOR WATER CLOSET
FIGURE 604.5.2 REAR-WALL GRAB BAR FOR WATER CLOSET <\/td>\n<\/tr>\n
225<\/td>\nFIGURE 604.7.1(A) DISPENSER OUTLET LOCATION – PROTRUDING DISPENSER BELOW GRAB BAR
FIGURE 604.7.1(B) DISPENSER OUTLET LOCATION PROTRUDING DISPENSER ABOVE GRAB BAR
FIGURE 604.7.1(C) DISPENSER OUTLET LOCATION RECESSED DISPENSER <\/td>\n<\/tr>\n
226<\/td>\nFIGURE 604.7.1(D) DISPENSER OUTLET LOCATION DISPENSER IN FRONT OF WATER CLOSET – EXCEPTION
FIGURE 604.9.2(A) WHEELCHAIR TOILET COMPARTMENTS WALL HUNG CLOSET, ADULT60 min152559 min1500FIGURE 604.9.2(B)WHEELCHAIR TOILET
FIGURE 604.9.2(B) WHEELCHAIR TOILET COMPARTMENTS FLOOR MOUNTED WATER CLOSET, ADULT – WALL HUNG AND FLOOR MOUNTED WATER CLOSET, CHILDREN <\/td>\n<\/tr>\n
227<\/td>\nFIGURE 604.9.2.3 WHEELCHAIR TOILET COMPARTMENTS ALTERNATE WHEELCHAIR TOILET COMPARTMENT
FIGURE 604.9.3(A) WHEELCHAIR TOILET COMPARTMENT DOORS DOOR SWINGING INTO THE WHEELCHAIR TOILET COMPARTMENT <\/td>\n<\/tr>\n
228<\/td>\nFIGURE 604.9.3(B) WHEELCHAIR TOILET COMPARTMENT DOORS EXCEPTION 3 – ALTERNATE WHEELCHAIR COMPARTMENT
FIGURE 604.9.3.1(A) WHEELCHAIR TOILET COMPARTMENT DOOR OPENING LOCATION – DOOR SWINGING IN ON FRONT WALL OF PARTITION
FIGURE 604.9.3.1(B) WHEELCHAIR TOILET COMPARTMENT DOOR OPENING LOCATION DOOR SWINGING IN ON SIDE WALL OF PARTITIONS <\/td>\n<\/tr>\n
229<\/td>\nTABLE 604.9.3.1 \u2014DOOR OPENING LOCATION
FIGURE 604.9.5(A) TOE CLEARANCE – ELEVATION
FIGURE 604.9.5(B) TOE CLEARANCE – PLAN <\/td>\n<\/tr>\n
230<\/td>\nFIGURE 604.10.1 AMBULATORY COMPARTMENT
FIGURE 604.11.2 CHILDREN\u2019S WATER CLOSET LOCATION
FIGURE 604.11.4 CHILDREN\u2019S WATER CLOSET HEIGHT <\/td>\n<\/tr>\n
231<\/td>\nFIGURE 604.11.7(A) CHILDREN\u2019S DISPENSER OUTLET – LOCATION
FIGURE 604.11.7(B) CHILDREN\u2019S DISPENSER OUTLET – EXCEPTION
SECTION 605 URINALS
FIGURE 605.2(A) HEIGHT AND DEPTH OF URINAL WALL HUNG TYPE <\/td>\n<\/tr>\n
232<\/td>\nFIGURE 605.2(B) HEIGHT AND DEPTH OF URINAL STALL TYPE
SECTION 606 LAVATORIES AND SINKS
FIGURE 606.3 HEIGHT OF LAVATORIES AND SINKS <\/td>\n<\/tr>\n
233<\/td>\nSECTION 607 BATHTUBS
FIGURE 607.2(A) CLEARANCE FOR BATHTUBS WITH REMOVABLE IN TUB SEATS
FIGURE 607.2(B) CLEARANCE FOR BATHTUBS WITH SEAT AT HEAD END OF TUB <\/td>\n<\/tr>\n
234<\/td>\nFIGURE 607.4.1(A) GRAB BARS FOR BATHTUBS WITH SEAT AT HEAD END OF TUB – ELEVATION
FIGURE 607.4.1(B) GRAB BARS FOR BATHTUBS WITH SEAT AT HEAD END OF TUB – PLAN
FIGURE 607.4.2(A) GRAB BARS FOR BATHTUBS WITH REMOVABLE SEATS – ELEVATION <\/td>\n<\/tr>\n
235<\/td>\nFIGURE 607.4.2(B) GRAB BARS FOR BATHTUBS WITH REMOVABLE SEATS – PLAN
FIGURE 607.5 LOCATION OF BATHTUB CONTROLS
SECTION 608 SHOWER COMPARTMENTS
FIGURE 608.2.1.1 TRANSFER-TYPE SHOWER COMPARTMENT SIZE <\/td>\n<\/tr>\n
236<\/td>\nFIGURE 608.2.1.2(A) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES NEW BUILDINGS – OPTION 1
FIGURE 608.2.1.2 (B) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES NEW BUILDINGS – OPTION 2
FIGURE 608.2.1.2(C) TRANSFER-TYPE SHOWER COMPARTMENT CLEARANCES EXISTING BUILDINGS
FIGURE 608.2.2.1 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT SIZE <\/td>\n<\/tr>\n
237<\/td>\nFIGURE 608.2.2.2 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT CLEARANCE
FIGURE 608.2.3.1 ALTERNATE ROLL-IN-TYPE SHOWER COMPARTMENT SIZE <\/td>\n<\/tr>\n
238<\/td>\nFIGURE 608.3.1(A) GRAB BARS IN TRANSFER-TYPE SHOWER – ELEVATION
FIGURE 608.3.2(A) GRAB BARS IN STANDARD ROLL-IN-TYPE SHOWER ELEVATION
FIGURE 608.3.1(B) GRAB BARS IN TRANSFER-TYPE SHOWER – PLAN
FIGURE 608.3.2(B) GRAB BARS IN STANDARD ROLL-IN-TYPE SHOWER PLAN <\/td>\n<\/tr>\n
239<\/td>\nFIGURE 608.3.3(A) GRAB BARS IN ALTERNATE ROLL-IN-TYPE SHOWER – ELEVATION
FIGURE 608.3.3(B) GRAB BARS IN ALTERNATE ROLL-IN-TYPE SHOWER – PLAN
FIGURE 608.4.1 TRANSFER-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION
FIGURE 608.4.2 STANDARD ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION <\/td>\n<\/tr>\n
240<\/td>\nFIGURE 608.4.3(A) ALTERNATE ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION – END WALL – ELEVATION
FIGURE 608.4.3(B) ALTERNATE ROLL-IN-TYPE SHOWER CONTROLS AND HAND SHOWER LOCATION – CONTROL WALL – ELEVATION
SECTION 609 GRAB BARS <\/td>\n<\/tr>\n
241<\/td>\nFIGURE 609.2 SIZE OF GRAB BARS
FIGURE 609.3 SPACING OF GRAB BARS
FIGURE 609.4.2(A) POSITIONS OF CHILDREN\u2019S GRAB BARS SIDE-WALL VIEW <\/td>\n<\/tr>\n
242<\/td>\nFIGURE 609.4.2(B) POSITIONS OF CHILDREN\u2019S GRAB BARS REAR-WALL VIEW
SECTION 610 SEATS
FIGURE 610.2(A) BATHTUB SEATS REMOVABLE IN-TUB SEATS
FIGURE 610.2(B) BATHTUB SEATS SEAT PROVIDED AT HEAD END OF TUB <\/td>\n<\/tr>\n
243<\/td>\nFIGURE 610.3.1 RECTANGULAR SHOWER COMPARTMENT SEATS
FIGURE 610.3.2 L-SHAPED SHOWER COMPARTMENT SEATS
SECTION 611 WASHING MACHINES AND CLOTHES DRYERS <\/td>\n<\/tr>\n
244<\/td>\nFIGURE 611.2(A) CLEAR FLOOR SPACE – TOP LOADING
FIGURE 611.2(B) CLEAR FLOOR SPACE – FRONT LOADING
FIGURE 611.4(A) HEIGHT OF LAUNDRY EQUIPMENT – TOP LOADING
FIGURE 611.4(B) HEIGHT OF LAUNDRY EQUIPMENT – FRONT LOADING <\/td>\n<\/tr>\n
245<\/td>\nSECTION 612 SAUNAS AND STEAM ROOMS <\/td>\n<\/tr>\n
246<\/td>\nCHAPTER 8 SPECIAL ROOMS AND SPACES
SECTION 801 GENERAL
SECTION 804 KITCHENS <\/td>\n<\/tr>\n
247<\/td>\nFIGURE 804.2.1(A) PASS-THROUGH KITCHEN CLEARANCE
FIGURE 804.2.1(B) PASS-THROUGH KITCHEN CLEARANCE
FIGURE 804.2.2(A) U-SHAPED KITCHEN CLEARANCE
FIGURE 804.2.2(B) U-SHAPED KITCHEN CLEARANCE <\/td>\n<\/tr>\n
248<\/td>\nFIGURE 804.2.2(C) U-SHAPED KITCHEN CLEARANCE – EXCEPTION <\/td>\n<\/tr>\n
250<\/td>\nCHAPTER 11 DWELLING UNITS AND SLEEPING UNITS
SECTION 1101 GENERAL
SECTION 1102 ACCESSIBLE UNITS <\/td>\n<\/tr>\n
251<\/td>\nSECTION 1103 TYPE A UNITS <\/td>\n<\/tr>\n
252<\/td>\nFIGURE 1103.11.2.4(A) WATER CLOSETS IN TYPE A UNITS – WATER CLOSET LOCATION <\/td>\n<\/tr>\n
253<\/td>\nFIGURE 1103.11.2.4(B) WATER CLOSETS IN TYPE A UNITS – MINIMUM CLEARANCE
FIGURE 1103.11.2.4(C) WATER CLOSETS IN TYPE A UNITS – CLEARANCE WITH LAVATORY (OVERLAP EXCEPTION)
FIGURE 1103.11.2.4(D) WATER CLOSETS IN TYPE A UNITS – WATER CLOSET SEAT HEIGHT
FIGURE 1103.11.2.5.1(A) CLEARANCE FOR BATHTUBS IN TYPE A UNITS WITH REMOVABLE SEAT
FIGURE 1103.11.2.5.1(B) CLEARANCE FOR BATHTUBS IN TYPE A UNITS WITH PERMANENT SEAT <\/td>\n<\/tr>\n
254<\/td>\nFIGURE 1103.11.2.5.2 STANDARD ROLL-IN-TYPE SHOWER COMPARTMENT IN TYPE A UNITS
FIGURE 1103.12.1.1 MINIMUM KITCHEN CLEARANCE IN TYPE A UNITS <\/td>\n<\/tr>\n
255<\/td>\nFIGURE 1103.12.1.2(A) U-SHAPED KITCHEN CLEARANCE IN TYPE A UNITS
FIGURE 1103.12.1.2(B) U-SHAPED KITCHEN CLEARANCE IN TYPE A UNITS EXCEPTION
FIGURE 1103.12.3 WORK SURFACE IN KITCHEN FOR TYPE A UNITS <\/td>\n<\/tr>\n
256<\/td>\nFIGURE 1103.12.4 KITCHEN SINK FOR TYPE A UNITS <\/td>\n<\/tr>\n
257<\/td>\nSECTION 1104 TYPE B UNITS
FIGURE 1104.1.1 CLEAR FLOOR SPACE FOR TYPE B UNITS <\/td>\n<\/tr>\n
258<\/td>\nFIGURE 1104.9 REACH OVER A KITCHEN OR BATHROOM CABINET <\/td>\n<\/tr>\n
259<\/td>\nFIGURE 1104.11.1.1 SWING-UP GRAB BARS FOR WATER CLOSETS <\/td>\n<\/tr>\n
260<\/td>\nFIGURE 1104.11.3.1.1 LAVATORY IN TYPE B UNITS – OPTION A BATHROOMS
FIGURE 1104.11.3.1.2(A) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS WATER CLOSET LOCATION
FIGURE 1104.11.3.1.2(B) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS CLEARANCE WIDTH AND DEPTH <\/td>\n<\/tr>\n
261<\/td>\nFIGURE 1104.11.3.1.2(C) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS INCREASED CLEARANCE DEPTH – FORWARD APPROACH
FIGURE 1104.11.3.1.2(D) CLEARANCE AT WATER CLOSETS IN TYPE B UNITS CLEARANCE WITH LAVATORY OVERLAP <\/td>\n<\/tr>\n
262<\/td>\nFIGURE 1104.11.3.1.3.1 PARALLEL APPROACH BATHTUB IN TYPE B UNITS – OPTION A BATHROOM <\/td>\n<\/tr>\n
263<\/td>\nFIGURE 1104.11.3.1.3.2 FORWARD APPROACH BATHTUB IN TYPE B UNITS OPTION A BATHROOM
FIGURE 1104.11.3.1.3.3(A) TRANSFER-TYPE SHOWER COMPARTMENT IN TYPE B UNITS
FIGURE 1104.11.3.1.3.3(B) TRANSFER-TYPE SHOWER COMPARTMENT IN TYPE B UNITS EXCEPTION
FIGURE 1104.11.3.2.1 LAVATORY IN TYPE B UNITS – OPTION B BATHROOM <\/td>\n<\/tr>\n
264<\/td>\nFIGURE 1104.11.3.2.3.1 BATHROOM CLEARANCE IN TYPE B UNITS OPTION B BATHROOM
FIGURE 1104.12.1.1 MINIMUM CLEARANCE IN TYPE B UNITS <\/td>\n<\/tr>\n
265<\/td>\nFIGURE 1104.12.1.2(A) U-SHAPED KITCHEN CLEARANCE IN TYPE B UNITS
FIGURE 1104.12.1.2(B) U-SHAPED KITCHEN CLEARANCE IN TYPE B UNITS – EXCEPTION <\/td>\n<\/tr>\n
266<\/td>\nSECTION 1105 TYPE C (VISITABLE) UNITS <\/td>\n<\/tr>\n
267<\/td>\nSECTION 1106 UNITS WITH COMMUNICATION FEATURES <\/td>\n<\/tr>\n
268<\/td>\nICC EVALUATION SERVICE <\/td>\n<\/tr>\n
269<\/td>\nICC LEARNING CENTER <\/td>\n<\/tr>\n
270<\/td>\nICC’S DIGITAL CODES LIBRARY <\/td>\n<\/tr>\n
271<\/td>\nICC MEMBERSHIP <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

International Plumbing Code, 3rd Printing<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
ICC<\/b><\/a><\/td>\n2021<\/td>\n271<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":211549,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[2670],"product_tag":[],"class_list":{"0":"post-211547","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-icc","8":"first","9":"instock","10":"sold-individually","11":"shipping-taxable","12":"purchasable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/211547","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/211549"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=211547"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=211547"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=211547"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}