AS 19880.3:2020
$43.55
Gaseous hydrogen – Fuelling stations – Valves (ISO 19880-3:2018, MOD)
Published By | Publication Date | Number of Pages |
AS | 2020-05-29 | 44 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This document adopts ISO 19880-3:2018 with modifications for Australia, which.provides the requirements and test methods for the safety performance of high pressure gas valves that are used in gaseous hydrogen stations of up to the H70 designation.
This document covers the following gas valves:
(a) Check valve.
(b) Excess flow valve.
(c) Flow control valve.
(d) Hose breakaway device.
(e) Manual valve.
(f) Pressure safety valve.
(g) Shut-off valve.
Published Code | AS |
---|---|
Published By | Australia Standards |
Publication Date | 2020-05-29 |
Pages Count | 44 |
Language | English |
Edition | 1 |
File Size | 809.0 KB |
ISBN | 9781760728595 |
ICS Codes | 43.060.40 - Fuel systems 71.100.20 - Gases for industrial application |
Related products
-
ASME BPVC V 2015
ASME BPVC – V -2015 BPVC Section V, Nondestructive Examination Published By Publication Date Number…
-
SA TS 19883:2020
Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD) Published…
-
BSI 23/30467648 DC 2023
BS ISO 19880-2. Gaseous hydrogen. Fuelling stations – Part 2. Dispensers and dispensing systems Published…
-
BS ISO 19880-1:2020
Gaseous hydrogen. Fuelling stations – General requirements Published By Publication Date Number of Pages BSI…
-
ISO 19880-1:2020
Gaseous hydrogen — Fuelling stations — Part 1: General requirements Published By Publication Date Number…
-
BS ISO 19880-8:2019+A1:2021
Gaseous hydrogen. Fuelling stations – Fuel quality control Published By Publication Date Number of Pages…
-
BSI 23/30444404 DC 2023
BS ISO 19880-7. Gaseous hydrogen. Fuelling stations – Part 7. Rubber O-rings Published By Publication…
-
BS EN IEC 61300-3-7:2021 – TC
Tracked Changes. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures –…
-
AS ISO 19880.5:2021
Gaseous hydrogen – Fuelling stations – Dispenser hoses and hose assemblies Published By Publication Date…
-
CA Energy Code Title 24 Part 6 2022 1stptg
California Energy Code, Title 24, Part 6 (W/ ERRATA & SUPPLEMENT) Published By Publication Date…
-
OR OSHA Division2 N/A
Oregon Occupational Safety and Health Standards – Oregon Administrative Rules, Chapter 437 – Division 2:…
-
BSI 20/30419494 DC:2020 Edition
BS ISO 19880-8 AMD 1. Gaseous hydrogen. Fuelling stations – Part 8. Fuel quality control…
-
BSI 23/30467370 DC 2023
BS EN 17127. Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols Published…
-
BS ISO 19880-9:2024
Gaseous hydrogen. Fuelling stations – Sampling for fuel quality analysis Published By Publication Date Number…
-
UBC V2 97 1997
Uniform Building Code Volume 2 Published By Publication Date Number of Pages ICC 1997 479
-
CA 2022 California Administrative Code Approved Express Terms COMPLETE
California Administrative Code Approved Express Terms Published By Publication Date Number of Pages CA 2022
-
BSI 24/30445784 DC 2023
BS ISO 19880-8 Gaseous hydrogen — Fuelling stations – Part 8: Fuel quality control Published…
-
BS EN IEC 60268-23:2023
Sound system equipment – TVs and monitors. Loudspeaker systems Published By Publication Date Number of…
-
AS/NZS 1080.3:2000 (R2016)
Timber – Methods of test – Density Published By Publication Date Number of Pages AS…
-
IEEE 1680.3-2024
IEEE Standard for Environmental Assessment of Televisions (Published) Published By Publication Date Number of Pages…
-
BS EN 17127:2024
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols Published By Publication Date…
-
ASTM-D6478 2002
D6478-02 Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints Published…
-
ASME A17.2 2023
ASME A17.2-2023 Guide for Inspection of Elevators, Escalators, and Moving Walks Published By Publication Date…
-
SA/SNZ TS ISO 19130.3:2022
Geographic information – Imagery sensor models for geopositioning Implementation schema Published By Publication Date Number…
-
ASME BPVC V 2017
ASME BPVC – V -2017 BPVC Section V, Nondestructive Examination Published By Publication Date Number…
-
IEEE 1680.3-2024
IEEE Standard for Environmental Assessment of Televisions (Published) Published By Publication Date Number of Pages…
-
AS/NZS ISO 19160.3:2020
Addressing – Address data quality Published By Publication Date Number of Pages AS 2020-08-28 47
-
IEEE 802.3ck-2022
IEEE Standard for Ethernet Amendment 4: Physical Layer Specifications and Management Parameters for 100 Gb/s,…
-
ASTM-D4771:2002 Edition
D4771-02 Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture Published By Publication Date…
-
AS ISO 19880.8:2021
Gaseous hydrogen – Fuelling stations – Fuel quality control Published By Publication Date Number of…
-
BSI 24/30479470 DC 2024
BS ISO 19880-5 Gaseous hydrogen. Fuelling stations – Part 5. Dispenser hoses and hose assemblies…
-
BS EN 12255-16:2021 – TC
Tracked Changes. Wastewater treatment plants – Physical (mechanical) filtration Published By Publication Date Number of…
-
BSI PD ISO/TS 19880-1:2016
Gaseous hydrogen. Fuelling stations – General requirements Published By Publication Date Number of Pages BSI…
-
ASTM-C835 2000
C835-00 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C Published By…
-
BS EN 17127:2024 – TC
Tracked Changes. Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols Published By…
-
ASTM-C868 2002
C868-02 Standard Test Method for Chemical Resistance of Protective Linings Published By Publication Date Number…
-
BS EN 17127:2020
Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporating filling protocols Published By Publication Date…
-
AS ISO 19650.3:2021
Organization and digitization of information about buildings and civil engineering works, including building information modelling…
-
BS ISO 6519:2023
Diesel engines. Fuel injection pumps. Tapers for shaft ends and hubs Published By Publication Date…
-
IEEE 1680.3-2024
IEEE Standard for Environmental Assessment of Televisions (Published) Published By Publication Date Number of Pages…