BSI 19/30395375 DC:2019 Edition
$13.70
BS ISO 719. Glass. Hydrolytic resistance of glass grains at 98 degrees C. Method of test and classification
Published By | Publication Date | Number of Pages |
BSI | 2019 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This International Standard specifies
-
a method for determining the hydrolytic resistance of glass grains at 98 °C. The resistance is measured and expressed by the volume of acid required for titration of the alkali extracted from the unit mass of glass, and may also be expressed by the amount of sodium oxide equivalent to this volume of acid;
-
a classification of glass according to the hydrolytic resistance determined by the method of this International Standard.
This International Standard is intended for use on the less resistant types of glass, like for example soda-lime glass. For the more resistant glasses, like i.e. borosilicate glass, the method specified in ISO 720 is preferable.
It is emphasized that there is no exact correlation between the classification laid down in this International Standard and that laid down in ISO 720, and it is, therefore, essential to identify which classification is being used.
Status | Definitive |
---|---|
Pages | 14 |
Publication Date | 2019-11-28 |
Standard Number | 19/30395375 DC |
Title | BS ISO 719. Glass. Hydrolytic resistance of glass grains at 98 degrees C. Method of test and classification |
Identical National Standard Of | ISO/DIS 719 |
Descriptors | Glass, Designations, Grades (quality), Laboratory glassware, Chemical-resistance tests, Volumetric analysis, Particulate materials, Test equipment, Solvent-resistance tests, Leaching, Water, Temperature, Hydrolytic resistance, Chemical analysis and testing, Specimen preparation, Dimensions, Testing conditions |
Publisher | BSI |
Committee | CH/212 |
ICS Codes | 81.040.01 - Glass in general |
Related products
-
BSI 19/30390374 DC:2019 Edition
BS EN 60068-2-13. Environmental testing – Part 2-13. Tests. Test M. Low air pressure Published…
-
BSI 19/30395271 DC:2019 Edition
BS EN 4628. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De…
-
BSI 19/30398370 DC:2019 Edition
BS IEC 60335-2-24. Household and similar electrical appliances. Safety – Part 2-24. Particular requirements for…
-
BSI 19/30396379 DC:2019 Edition
BS EN IEC 61803. Determination of power losses in high-voltage direct current (HVDC) converter stations…
-
BSI 19/30394375 DC:2019 Edition
BS ISO 17190-7. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders – Part 7. Test method…
-
BSI 19/30395772 DC:2019 Edition
BS EN 13614. Bitumen and bituminous binders. Determination of adhesivity of bituminous emulsions by water…
-
BSI 19/30395307 DC:2019 Edition
BS EN 4884. Aerospace series. Steel X3CrNiMoAl 13-8-2. Vacuum induction melted and consumable electrode remelted.…
-
BSI 19/30395270 DC:2019 Edition
BS EN 4627. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De…
-
BSI 19/30390385 DC:2019 Edition
BS ISO/IEC 23003-5. Information technology. MPEG audio technologies – Part 5. Uncompressed audio in MPEG-4…
-
BSI 19/30397675 DC:2019 Edition
BS EN 4165-003. Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous –…
-
BSI 19/30390371 DC:2019 Edition
BS IEC 60747-14-11. Semiconductor devices – Part 14-11. Semiconductor sensors. Test method of surface acoustic…
-
BSI 19/30395303 DC:2019 Edition
BS EN 62196-3. Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles…
-
BSI 19/30396374 DC:2019 Edition
BS ISO 20661.2. Ships and marine technology. Cutter suction dredger supervisory and control system Published…
-
BSI 19/30395756 DC:2019 Edition
BS EN 16205. Laboratory measurement of walking noise on floors Published By Publication Date Number…
-
BSI 19/30395318 DC:2019 Edition
BS ISO 21308-3. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP) –…
-
BSI 19/30395378 DC:2019 Edition
BS ISO 720. Glass. Hydrolytic resistance of glass grains at 121 degrees C. Method of…
-
BSI 19/30391075 DC:2019 Edition
BS ISO 13728. Ships and marine technology. Ship’s mooring and towing fittings. Panama chocks Published…
-
BSI 19/30395399 DC:2019 Edition
BS EN ISO 19299. Electronic fee collection. Security framework Published By Publication Date Number of…
-
BSI 19/30395304 DC:2019 Edition
BS EN IEC 61076-3-122. Connectors for electrical and electronic equipment. Product requirements – Part 3-122.…
-
BSI 19/30392370 DC:2019 Edition
BS ISO 22383. Security and resilience. Authenticity, integrity and trust for products and documents. Guidelines…
-
BSI 19/30394357 DC:2019 Edition
BS ISO 17190-1. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders – Part 1. Test method…
-
BSI 19/30391385 DC:2019 Edition
BS EN 50377-14-1. Connector sets and interconnect components to be used in optical fibre communication…
-
BSI 19/30395327 DC:2019 Edition
BS ISO 799-2. Ships and marine technology. Pilot ladders – Part 2. Maintenance, use, survey,…
-
BSI 19/30395305 DC:2019 Edition
BS EN IEC 61784-3. Industrial communication networks. Profiles – Part 3. Functional safety fieldbuses. General…
-
BSI 19/30389537 DC:2019 Edition
BS IEC 61196-6-2. Coaxial communication cables – Part 6-2. Detail specification for 75-4 type CATV…
-
BSI 19/30395437 DC:2019 Edition
BS EN 61000-3-2 AMD1. Fragment 2. Electromagnetic compatibility (EMC) – Part 3-2. Limits. Limits for…
-
BSI 19/30395273 DC:2019 Edition
BS EN 4630. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Forgings. De…
-
BSI 19/30395393 DC:2019 Edition
BS EN ISO 13143-1. Electronic fee collection. Evaluation of on-board and roadside equipment for conformity…
-
BSI 19/30395381 DC:2019 Edition
BS EN ISO 6847. Welding consumables. Deposition of a weld metal pad for chemical analysis…
-
BSI 19/30396377 DC:2019 Edition
BS ISO 21143.2. Technical product documentation (TPD). Requirements on digital mock-up virtual assembly test for…
-
BSI 19/30397537 DC:2019 Edition
BS EN 1555-1. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) –…
-
BSI 19/30381375 DC:2019 Edition
BS EN 16851 AMD1. Cranes. Light crane systems Published By Publication Date Number of Pages…
-
BSI 19/30394372 DC:2019 Edition
BS ISO 17190-6. Urine-absorbing aids for incontinence. Polyacrylate superabsorbent powders – Part 6. Test method…
-
BSI 19/30396385 DC:2019 Edition
BS EN 3637. Aerospace series. Nuts, self-locking, bi-hexagonal (double reduced), in heat resisting nickel base…
-
BSI 19/30397735 DC:2019 Edition
BS EN 2897. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank,…
-
BSI 19/30395275 DC:2019 Edition
BS EN 4882. Aerospace series. Steel X5CrNiCu 17-4 (1.4542). Air melted. Solution treated and precipitation…
-
BSI 19/30393535 DC:2019 Edition
BS ISO 7195. Nuclear energy. Packagings for the transport of uranium hexafluoride (UF6) Published By…
-
BSI 19/30395315 DC:2019 Edition
BS ISO 21308-2. Road vehicles. Product data exchange between chassis and bodywork manufacturers (BEP) –…
-
BSI 19/30395759 DC:2019 Edition
BS EN 13477-2. Non-destructive testing. Acoustic emission testing. Equipment characterisation – Part 2. Verification of…
-
BSI 19/30395274 DC:2019 Edition
BS EN 4631. Aerospace series. Steel X4CrNiMo16-5-1 (1.4418). Air melted. Hardened and tempered. Bar. De…