AS 2013.1:1989
$9.75
Cleanroom garments – Product requirements
| Published By | Publication Date | Number of Pages |
| AS | 1989-06-19 | 7 |
Sets out requirements for new cleanroom garments designed for use in cleanrooms and similar controlled environment areas (particulate control).
Scope
This Standard specifies requirements for garments designed for use in cleanrooms or similar controlled environment areas.
NOTE: Requirements and guidelines for selection, processing, and use of the garments are given in AS 2013.2.
Related products
-
AS 2134.1:1999 (R2016)
Recommended practice for chemical analysis by atomic absorption spectrometry – Flame atomic absorption spectrometry Published…
-
AS 2118.1:1999
Automatic fire sprinkler systems – General requirements Published By Publication Date Number of Pages AS…
-
BS 2011-4.2:1984
Environmental testing. Miscellaneous – Guidance on the application of the tests of BS 2011 to…
-
BS 812-103.1:1985
Testing aggregates. Method for determination of particle size distribution – Sieve tests Published By Publication…
-
AS 2013.2:1989
Cleanroom garments – Processing and use Published By Publication Date Number of Pages AS 1989-06-19…
-
SAE J 1980:2011
Guidelines for Evaluating Out-of-Position Vehicle Occupant Interactions with Deploying Frontal Airbags Published By Publication Date…
-
IEEE 16509-1999
ISO/IEC 16509: 1999 (IEEE Std 2000.1-1998) Year 2000 Terminology Published By Publication Date Number of…
-
IEEE 2000.1-1998
IEEE Standard for Information Technology: Standard for Year 2000 Terminology Published By Publication Date Number…
-
ISO 19892:2011
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test…
-
BS 2011-2.1Ga:1984:1987 Edition
Environmental testing. Tests – Test Ga. Acceleration, steady state Published By Publication Date Number of…
-
AS 2113.1:1998 (R2013)
Oil of Australian eucalyptus – 70 to 75% cineole Published By Publication Date Number of…
-
BS 2011-2.1Ta:1989
Environmental testing. Tests – Test Ta. Soldering. Solderability testing by the wetting balance method Published…
-
AS/NZS 2293.1:1998
Emergency evacuation lighting for buildings – System design, installation and operation Published By Publication Date…
-
IEEE 2000.1 1999
IEEE Standard for Information Technology: Standard for Year 2000 Terminology Published By Publication Date Number…
-
ASTM-A989/A989M 2013
A989/A989M-13 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High…
-
IEEE 1003.1-1988
IEEE Standard Portable Operating System Interface for Computer Environments Published By Publication Date Number of…
-
NZS/BS 2573.1:1983
Rules for the design of cranes – Specification for classification, stress calculations and design criteria…
-
BS 2011-2.1T:1981
Environmental testing. Tests – Test T. Soldering Published By Publication Date Number of Pages BSI…
-
UNE-EG 201121:1999
A guide to the application of TBR 21. Published By Publication Date Number of Pages…
-
AS 2055.1:1985
PVC sheet floor-covering – Unbacked, flexible Published By Publication Date Number of Pages AS 1985-01-31…
-
AS 2001.3.1:1998 (R2016)
Methods of test for textiles – Chemical tests – Determination of pH of aqueous extract…
-
AS 2773.1:1998
Ultrasonic cleaners for health care facilities – Non-portable Published By Publication Date Number of Pages…
-
BS 5550-2.1.1:1984:1980 Edition
Cinematography. 16 mm film. Raw stock – Specification for dimensions of 16 mm motion-picture film…
-
ASTM-A989 2011(Redline)
A989/A989M-11 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High…
-
SAE J 1289:2013
Mobile Crane Stability Ratings Published By Publication Date Number of Pages SAE 2013-03-28 3
-
AS 2113.2:1998 (R2013)
Oil of Australian eucalyptus – 80 to 85% cineole Published By Publication Date Number of…
-
ASTM-C989 2011
C989/C989M-11 Standard Specification for Slag Cement for Use in Concrete and Mortars Published By Publication…
-
SAE J 1989:2011
Recommended Service Procedure for the Containment of CFC-12 (R-12) Published By Publication Date Number of…
-
AS/NZS 4014.1:1999
Domestic solid fuel burning appliances – Test fuels – Hardwood Published By Publication Date Number…
-
BS 5724-2.11.1:1989
Medical electrical equipment. Particular requirements for safety – Specification for gamma beam therapy equipment. Revised…
-
BS 3G 100-2.3.1:1969
Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions –…
-
BS EN 50131-6:1998
Alarm systems. Intrusion systems – Power supplies Published By Publication Date Number of Pages BSI…
-
AS/NZS 2512.1:1998
Methods of testing protective helmets – Definitions and headforms Published By Publication Date Number of…
-
CIE 199:2011
Methods for Evaluating Color Differences in Images Published By Publication Date Number of Pages CIE…
-
BS 4533-103-103.1:1981
Luminaires. Performance requirements – Specification for light distribution from road-lighting lanterns Published By Publication Date…
-
AS/NZS 2106.1:1999
Methods for the determination of the flash point of flammable liquids (closed cup) – Abel…
-
BS 5173-103-103.1:1986
Methods of test for rubber and plastics hoses and hose assemblies. Physical tests – Determination…
-
BS 2011-2.1Kb:1987
Environmental testing. Tests – Test Kb. Salt mist, cyclic (sodium chloride solution) Published By Publication…
-
ISO 19893:2011
Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test…
-
IEEE 2000.1-1999
IEEE Standard for Information Technology: Standard for Year 2000 Terminology Published By Publication Date Number…
