AS 2252.6:2011
$37.70
Controlled environments – Clean workstations – Design, installation and use
Published By | Publication Date | Number of Pages |
AS | 2011-10-31 | 29 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
Specifies design requirements and guidance for the construction of clean workstations, recommendations for the environment in which they are used, and performance requirements and guidance on their installation and use.
Scope
This Standard specifies design, construction and performance requirements for clean workstations, together with requirements and guidance relating to their installation and use.
NOTE: Requirements for biological safety cabinets and cytotoxic drug safety cabinets are specified in AS 2252, Parts 1, 2, 3 and 4, and AS 2252.5 respectively.
Published Code | AS |
---|---|
Published By | Australia Standards |
Publication Date | 2011-10-31 |
Pages Count | 29 |
Language | English |
Edition | 1 |
File Size | 358.4 KB |
ISBN | 9780733799501 |
ICS Codes | 13.040.30 - Workplace atmospheres 13.040.35 - Cleanrooms and associated controlled environments |
Related products
-
ISO 22516:2019
Peintures et vernis — Détermination pratique de la matière non volatile et de la matière…
-
SAE AS 22520/18A:2021
Crimping Tools, Terminal, Hand, Wire Termination; in-Service Inspection Gages for AS22520/17 Crimp Tools Published By…
-
AS 2758.6:2019
Aggregates and rock for engineering purposes – Guidelines for the specification of armourstone Published By…
-
SAE AS 22520/40:2012
Crimping Tools, Terminal, Hand, Wire Termination; Type II T-Head for Terminal Lugs and Splices Size…
-
BS ISO 22516:2019
Paints and varnishes. Practical determination of non-volatile and volatile matter content during application Published By…
-
ASTM-E2526 2013
E2526-08(2013) Standard Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells…
-
UL 2256:2001
Nonmetallic Sheathed Cable Interconnects Published By Publication Date Number of Pages UL 2001-06-29 22
-
SAE AS 22520/48:2019
Crimp Tools, Type 1, Hand or Power Actuated, Wire Termination, Hydraulic Tool for Wire Barrel…
-
SAE AS 22520/41:2012
Crimping Tools, Terminal, Hand, Wire Termination; Type II for Terminals and Splices Size 10-12 Published…
-
SAE AS 22520/46:2018
Crimping Tools, Type 1, Terminal, Hand, Wire Termination for Miniature Co-Axial and Tri-Axial Inner Contacts…
-
SAE AS 22520/45A:2017
Crimping Tools, Type I, Hand, Wire, Termination for Wire Barrel Size 10 Power Contacts Published…
-
SAE AS 22520/1B:2019
Crimping Tools, Type I, Terminal, Hand, Wire Termination for Wire Barrel Sizes 12 Through 22…
-
BS ISO 22326:2018
Security and resilience. Emergency management. Guidelines for monitoring facilities with identified hazards Published By Publication…
-
AS/NZS 1252.2:2016
High-strength steel fastener assemblies for structural engineering – Bolts, nuts and washers – Verification testing…
-
SAE AS 22520/38:2011
Crimping Tool, Terminal, Hand Actuated, Wire Termination, Type II, for External Power Plug Socket Contacts…
-
AS/NZS 2053.6:2001 (R2016)
Conduits and fittings for electrical installations – Profile-wall, smooth-bore conduits and fittings of insulating material…
-
AS/NZS 2210.6:2001
Occupational protective footwear – Additional requirements and test methods Published By Publication Date Number of…
-
AS/NZS 2243.6:2010
Safety in laboratories – Plant and equipment aspects Published By Publication Date Number of Pages…
-
SAE AS 22520/19A:2019
Crimping Tool, Type 2, Terminal, Hand, Wire Termination for Size 16 Shielded Contacts (Outer Contact)…
-
SAE AS 22520/39A:2014
Crimping Tool, Terminal, Hand, Actuated, Wire Termination, in-Service Inspection Gage for AS22520/5, /37, /38, and…
-
SAE AS 22520:2011
Crimping Tools, Wire Termination, General Specification for Published By Publication Date Number of Pages SAE…
-
SAE AS 22520/34:2015
Crimping Tools, Type 1, Terminal, Hand, Wire Termination, for Crimp Type Removable Contacts for MIL-DTL-28840…
-
SAE AS 22520/20A:2019
Crimping Tool, Type 2, Terminal, Hand, Wire Termination for Size 16 Shielded Contacts (Shield Crimp…
-
SAE AS 22520/10:2015
Crimping Tools, Type 2, Terminal, Hand, Wire Termination, for Coaxial, Twinaxial, Triaxial, Shielded Contacts and…
-
SAE AMS 2252E:2016
Tolerances Low-Alloy Steel Sheet, Strip, and Plate Published By Publication Date Number of Pages SAE…
-
SAE AS 22520/5A:2017
Crimping Tools, Type 2, Terminal, Hand, Wire Termination, for Coaxial, Twinaxial, Triaxial, Shielded Contacts and…
-
ISO 22326:2018
Security and resilience — Emergency management — Guidelines for monitoring facilities with identified hazards Published…
-
SAE AS 22520/37:2013
Crimping Tool, Type 2, Electrical, Wire Splicing, Hand Actuated, Type II, for Environmental Splices, Wire…
-
SAE AS 22520/31:2014
Crimping Tool, Type 2, Terminal, Hand, for Shielded Size 12 Outer Contacts Published By Publication…
-
AS 2252.4:2010
Controlled environments – Biological safety cabinets Classes I and II – Installation and use (BS…
-
SAE AS 22520/43:2011
Crimping Tools, Terminal, Hand, Wire Termination; in-Service Inspection Gage for AS22520/40 Crimp Tools Published By…
-
SAE AS 22520/23B:2021
Crimp Tools, Type 1, Terminal, Hand or Power Actuated, Wire Termination, Pneumatic Tool for Wire…
-
SAE AS 22520/35:2011
Crimping Tools, Terminal, Hand, Wire Termination; in-Service Inspection Gages for AS22520/34 Crimp Tools Published By…
-
ISO 22286:2018
Petroleum products and lubricants – Determination of the dropping point of grease with an automatic…
-
AS 2359.6:2013
Powered industrial trucks-Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO…
-
AS 2252.5:2017
Controlled environments – Cytotoxic drug safety cabinets (CDSC) – Design, construction, installation, testing and use…
-
SAE AS 22520/17:2011
Crimping Tools, Terminal, Hand, Wire Termination; for Crimp Type Removable Contacts, Electric Connectors Published By…
-
AS 2252.3:2011
Controlled environments – Biological safety cabinets Class III – Design Published By Publication Date Number…
-
BS EN ISO 22526-3:2021:2022 Edition
Plastics. Carbon and environmental footprint of biobased plastics – Process carbon footprint, requirements and guidelines…
-
AS/NZS 1252.1:2016
High-strength steel fastener assemblies for structural engineering – Bolts, nuts and washers – Technical requirements…