AS 3706.3:2012
$20.15
Geotextiles – Methods of test-Determination of tearing strength – Trapezoidal method
| Published By | Publication Date | Number of Pages |
| AS | 2012-04-30 | 9 |
This Standard sets out a method for determining the tearing strength of geotextiles under
in-plane loading, using the trapezoidal method.
NOTE: The trapezoidal method is a tearing force tension test in which the strength is determined
primarily by the individual fibres of the fabric structure, and their bonding or interlocking where applicable.
Related products
-
IEEE 3006.7 2013
IEEE Recommended Practice for Determining the Reliability of 7×24 Continuous Power Systems in Industrial and…
-
IEEE 3006.9-2013
IEEE Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of…
-
ASTM-D7063 2011
D7063/D7063M-11 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving…
-
IEEE 3002.3 2018:2019 Edition
IEEE Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems…
-
AS ISO 17063:2021
Earth-moving machinery – Braking systems of pedestrian-controlled machines – Performance requirements and test procedures Published…
-
AS/NZS 3666.3:2011
Air-handling and water systems of buildings – Microbial control – Performance-based maintenance of cooling water…
-
AS 3706.1:2012
Geotextiles – Methods of test-General requirements, sampling, conditioning, basic physical properties and statistical analysis Published…
-
AS 3706.6:2012
Geotextiles – Methods of test-Determination of seam strength Published By Publication Date Number of Pages…
-
AS/NZS 1906.3:2017
Retroreflective materials and devices for road traffic control purposes – Raised pavement markers (retroreflective and…
-
AS/NZS 3500.3:2018
Plumbing and drainage – Stormwater drainage Published By Publication Date Number of Pages AS 2018-06-29…
-
ISO/IEC 33063:2015
Information technology — Process assessment — Process assessment model for software testing Published By Publication…
-
CAN ULC-S716.3-2019
Standard for Exterior Insulation and Finish Systems (EIFS) – Design Application Published By Publication Date…
-
AS/NZS 3500.3:2021
Plumbing and drainage – Stormwater drainage Published By Publication Date Number of Pages AS 2021-05-28…
-
IEEE 3007.3-2012
IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems Published By Publication…
-
AS ISO 7376.3:2002
Laryngoscopic fittings – Fibre-illuminated re-usable rigid laryngoscopes Published By Publication Date Number of Pages AS…
-
AS 3660.3:2014
Termite management – Assessment criteria for termite management systems Published By Publication Date Number of…
-
AS/NZS 3500.3:2015
Plumbing and drainage – Stormwater drainage Published By Publication Date Number of Pages AS 2015-03-02…
-
AS 3706.11:2012
Geotextiles – Methods of test-Determination of durability – Resistance to degradation by light, heat and…
-
IEEE 3006.3 2017:2018 Edition
IEEE Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial…
-
IEEE 3006.7-2013
IEEE Recommended Practice for Determining the Reliability of 7×24 Continuous Power Systems in Industrial and…
-
IEEE 3006.2-2016
IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems Published…
-
ASTM-D7063/D7063M 2018
D7063/D7063M-18 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture…
-
IEEE 3006.9-2013
IEEE Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of…
-
ASTM-D7063 2011(Redline)
D7063/D7063M-11 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving…
-
AS 4700.3:2014
Implementation of Health Level Seven (HL7) Version 2.5 – Electronic messages for exchange of information…
-
AS/NZS 4700.3:2002
Implementation of Health Level Seven (HL7) Version 2.3.1 – Electronic messages for exchange of information…
-
AS 3706.4:2012
Geotextiles – Methods of test-Determination of burst strength – California bearing ratio (CBR) – Plunger…
-
AS 3711.3:2015
Freight containers – Corner fittings (ISO 1161:1984, MOD) Published By Publication Date Number of Pages…
-
AS 3706.9:2012
Geotextiles – Methods of test-Determination of permittivity, permeability and flow rate Published By Publication Date…
-
IEEE 3006.9 2013
IEEE Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of…
-
AS 3706.2:2012
Geotextiles – Methods of test-Determination of tensile properties – Wide strip and grab method Published…
-
AS 3706.5:2014
Geotextiles – Methods of test – Determination of puncture resistance – Drop cone method Published…
-
ISO 7063:2018
Rolling bearings — Needle roller bearing track rollers — Boundary dimensions, geometrical product specifications (GPS)…
-
IEEE 3006.5 2015
IEEE Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of…
-
IEEE 3006.8 2018
IEEE Recommended Practice for Analyzing Reliability Data for Equipment Used in Industrial and Commercial Power…
-
IEEE 3006.2 2016
IEEE Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems Published…
-
AS 3706.7:2014
Geotextiles – Methods of test – Determination of pore-size distribution – Dry-sieving method Published By…
-
CAN ULC-S706.1-2016
Standard for Wood Fiber Insulating Boards for Buildings Published By Publication Date Number of Pages…
-
IEEE 3007.3 2012
IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems Published By Publication…
-
AS 3706.13:2012
Geotextiles – Methods of test-Determination of durability – Resistance to certain microbiological agents Published By…
