AS 3731.2:1995
$27.30
Stationary batteries – Nickel-cadmium – Valve-regulated type
Published By | Publication Date | Number of Pages |
AS | 1995-10-05 | 20 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
Specifies requirements and tests for valve-regulated nickel-cadmium rechargeable batteries. Technically identical with and reproduced from IEC 622:1988, including Amendment No.2:1992 and Corrigendum (August 1992).
Scope
This standard specifies tests and requirements for sealed nickel-cadmium prismatic rechargeable single cells.
Note. – In this context "prismatic" refers to cells having rectangular sides and base.
Published Code | AS |
---|---|
Published By | Australia Standards |
Publication Date | 1995-10-05 |
Pages Count | 20 |
Language | English |
Edition | 2 |
File Size | 122.9 KB |
ISBN | 0726299537 |
ICS Codes | 29.220.30 - Alkaline secondary cells and batteries |
Related products
-
BS 6200-3.31.2:1992
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of…
-
AS 3730.23:1993
Guide to the properties of paints for buildings – Latex – Wallboard and masonry sealer…
-
AS 3536.2:1998
Reference gases – Preparation, analysis and certification of traceable reference gas mixtures Published By Publication…
-
BS 3712-4:1985
Building and construction sealants – Methods of test for adhesion in peel, tensile extension and…
-
AS 3734.1:1991
Information systems – Equipment – Fibre distributed data interfaces (FDDI) – Token ring PHYsical layer…
-
AS/NZS 3711.4:1993
Freight containers – General purpose containers Published By Publication Date Number of Pages AS 1993-10-24…
-
AS 3789.2:1991
Textiles for health care facilities and institutions – Theatre linen and pre-packs Published By Publication…
-
JIS K 7312:1996
Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers Published By Publication Date Number…
-
BS 6200-3.1.2:1991
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of…
-
BS 6200-3.31.1:1992
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of…
-
AS 3719.2:1998 (R2016)
Aluminium and aluminium alloys – Determination of silicon – Gravimetric method Published By Publication Date…
-
BS 6200-3.11.2:1991
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of…
-
AS 3830.2:1998
Ferroalloys – Specifications – Ferrochromium Published By Publication Date Number of Pages AS 1998-08-05 9
-
AS 3734.2:1991
Information systems – Equipment – Fibre distributed data interface (FDDI) – Token ring Media Access…
-
BS 6200-3.33.2:1992
Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of…
-
BS 3712-1:1985
Building and construction sealants – Methods of test for homogeneity, relative density, extrudability, penetration and…
-
AS/NZS 3749.2:1997
Intruder alarm systems – Road vehicles – Installation and maintenance Published By Publication Date Number…
-
JIS G 3312:1994
Prepainted Hot-Dip Zinc- Coated Steel Sheets and Coils Published By Publication Date Number of Pages…
-
AS 1931.2:1996
High-voltage test techniques – Measuring systems Published By Publication Date Number of Pages AS 1996-03-05…
-
AS/NZS 3744.2:1998 (R2013)
Furniture – Assessment of the ignitability of upholstered furniture – Ignition source – Match-flame equivalent…
-
AS/NZS 3711.3:1993
Freight containers – Corner fittings Published By Publication Date Number of Pages AS 1993-10-24 31
-
AS 3734.3:1991
Information systems – Equipment – Fibre Distributed Data Interface (FDDI) – Physical layer Medium Dependent…
-
AS 3730.20:1993
Guide to the properties of paints for buildings – Latex – Roofing paint Published By…
-
AS 3641.2:1999 (R2016)
Recommended practice for atomic emission spectrometric analysis – Inductively coupled plasma excitation Published By Publication…
-
AS 3991.2:1992
Methods of testing flat cellulose-cement sheets – Determination of flexural strength – Modulus of rupture…
-
JIS Z 3312:1993
MAG Welding Solid Wires for Mild Steel and High Strength Steel Published By Publication Date…
-
BS 3712-4:1991
Building and construction sealants – Method of test for adhesion in peel Published By Publication…
-
AS 1735.2:1997
Lifts, escalators and moving walks – Passenger and goods lifts – Electric Published By Publication…
-
AS 3787.2:1997
General requirements for single-use, sterile, plasticized polyvinyl chloride (PVC) packs for human blood – Multiple…
-
AS 3797.2:1991
Hand hammers – Specific requirements for heavy hammers Published By Publication Date Number of Pages…
-
AS 3871.2:1994
Magnetic tape sound recording and reproducing systems – Calibration tapes Published By Publication Date Number…
-
BS 7312:1990
Methods of test for magnetite for use in coal preparation Published By Publication Date Number…
-
AS/NZS 3661.2:1994
Slip resistance of pedestrian surfaces – Guide to the reduction of slip hazards Published By…
-
BS 6043-3.1.2:1999
Methods of sampling and test for carbonaceous materials used in aluminium manufacture – Electrodes –…
-
HB 37.2:1993 (R2016)
Handbook of Australian fire Standards – Electrical equipment Published By Publication Date Number of Pages…
-
AS 3731.1:1995
Stationary batteries – Nickel-cadmium – Vented type Published By Publication Date Number of Pages AS…
-
AS/NZS 3711.2:1993
Freight containers – Terminology Published By Publication Date Number of Pages AS 1993-10-24 22
-
AS 3730.4:1992
Guide to the properties of paints for buildings – Solvent-borne – Interior – Flat Published…
-
AS/NZS 3711.7:1993 (R2016)
Freight containers – Dry bulk containers Published By Publication Date Number of Pages AS 1993-10-25…
-
AS/NZS 4331.2:1995 (R2020)
Metallic flanges – Cast iron flanges Published By Publication Date Number of Pages AS 1995-12-05…