šŸ”„šŸ”„ Donā€™t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

šŸ”
ASME B30.2 2022

ASME B30.2 2022

$98.04

ASME B30.2 – 2022 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist

Published By Publication Date Number of Pages
ASME 2022 46
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. Weā€™re here to assist you 24/7.
Email:[email protected]

Volume B30.2 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-operated and power-driven overhead and gantry cranes that have a top-running single girder or multiple girder bridge, with one or more top-running trolley hoists used for vertical lifting and lowering of freely suspended, unguided loads consisting of equipment and materials.

PDF Catalog

PDF Pages PDF Title
4 CONTENTS
6 FOREWORD
7 ASME B30 COMMITTEE ROSTER
9 B30 STANDARD INTRODUCTION
12 ASME B30.2-2022 SUMMARY OF CHANGES
14 Chapter 2-0 Scope, Definitions, References, and Personnel Competence
SECTION 2-0.1: SCOPE OF B30.2
SECTION 2-0.2: DEFINITIONS
16 Figures
Figure 2-0.2-5 Wall Crane
Figure 2-0.2-1 Cantilever Gantry Crane
Figure 2-0.2-2 Gantry Crane
Figure 2-0.2-3 Overhead Crane
Figure 2-0.2-4 Semigantry Crane
18 SECTION 2-0.3: REFERENCES
19 SECTION 2-0.4: PERSONNEL COMPETENCE
20 Chapter 2-1 General Construction and Installation
SECTION 2-1.1: MARKINGS
2-1.1.1 Rated Load Markings ā€” Crane
2-1.1.2 Rated Load Markings ā€” Hoists
2-1.1.3 Manufacturerā€™s Identification Markings
2-1.1.4 Multiple Hoist Identification Markings
2-1.1.5 Warnings
2-1.1.6 Controls
21 SECTION 2-1.2: CLEARANCES
2-1.2.1 Clearance From Obstruction
2-1.2.2 Clearance Between Parallel Cranes
SECTION 2-1.3: GENERAL CONSTRUCTION ā€” RUNWAYS AND SUPPORTING STRUCTURE
2-1.3.1 Foundations and Anchorages
2-1.3.2 Crane Runways
SECTION 2-1.4: CRANE CONSTRUCTION
2-1.4.1 Welded Construction
2-1.4.2 Structural Components
22 2-1.4.3 Modifications
SECTION 2-1.5: CABS ā€” NORMAL OR SKELETON (IF PROVIDED)
2-1.5.1 Cab Location
2-1.5.2 Cab Construction
2-1.5.3 Access to Crane
2-1.5.4 Toolbox
2-1.5.5 Fire Extinguisher
2-1.5.6 Lighting
SECTION 2-1.6: LUBRICATION
SECTION 2-1.7: SERVICE PLATFORMS (FOOTWALKS)
2-1.7.1 Construction of Service Platforms
23 2-1.7.2 Ladders and Stairways
2-1.7.3 Egress
SECTION 2-1.8: STOPS AND BUMPERS
2-1.8.1 Trolley Stops
2-1.8.2 Bridge and Gantry Bumpers
2-1.8.3 Trolley Bumpers
24 SECTION 2-1.9: RAIL SWEEPS
2-1.9.1 Bridge Rail Sweeps
2-1.9.2 Trolley Rail Sweeps
2-1.9.3 Gantry Rail Sweeps
SECTION 2-1.10: GUARDS FOR MOVING PARTS
SECTION 2-1.11: TRUCK FRAME DROP
SECTION 2-1.12: BRAKES AND BRAKING MEANS
2-1.12.1 Hoist Holding Brakes
25 2-1.12.2 Hoist Control Braking Means
2-1.12.3 Trolley Brakes and Braking Means
2-1.12.4 Bridge Brakes and Braking Means
2-1.12.5 Trolley and Bridge Brake Provisions
SECTION 2-1.13: ELECTRICAL EQUIPMENT
2-1.13.1 General
26 2-1.13.2 Equipment
2-1.13.3 Controllers
2-1.13.4 Resistors
27 Figure 2-1.13.3-1 Recommended Arrangement of Controllers or Master Switches (Three-Motion Crane)
Figure 2-1.13.3-2 Recommended Arrangement of Controllers or Master Switches (Four-Motion Crane)
28 Figure 2-1.13.3-3 Recommended Arrangement of Controllers (Pendant Push-Button Station Arrangement)
Figure 2-1.13.3-4 Recommended Arrangement of Controllers (Radio Crane Control Transmitter Lever Arrangement)
29 2-1.13.5 Disconnecting Means
2-1.13.6 Hoist Limit Switches
2-1.13.7 Runway and Bridge Conductor Systems
2-1.13.8 Crane Powered Lifting Devices
2-1.13.9 Service Receptacle
SECTION 2-1.14: HOISTING EQUIPMENT
2-1.14.1 Sheaves
2-1.14.2 Drums
30 2-1.14.3 Ropes
2-1.14.4 Equalizers
2-1.14.5 Hooks
2-1.14.6 Guards for Hoisting Ropes
SECTION 2-1.15: WARNING DEVICES OR MEANS FOR A CRANE WITH A POWER-TRAVELING MECHANISM
2-1.15.1 Cab- and Remote-Operated Cranes
2-1.15.2 Floor-Operated Cranes
2-1.15.3 Types of Devices
31 SECTION 2-1.16: MANUAL
2-1.16.1 General Information
2-1.16.2 Safety Personnel
SECTION 2-1.17: TRANSLATION OF SAFETY-RELATED INFORMATION AND CONTROL DESIGNATIONS
32 Chapter 2-2 Inspection and Testing
SECTION 2-2.1: INSPECTION
2-2.1.1 General
2-2.1.2 Initial Inspection
2-2.1.3 Functional Test Inspection
2-2.1.4 Frequent Inspection
33 2-2.1.5 Periodic Inspection
2-2.1.6 Inspection of Cranes Not in Regular Use
SECTION 2-2.2: ROPE INSPECTION
2-2.2.1 General
2-2.2.2 Frequent Rope Inspection
2-2.2.3 Periodic Rope Inspection
34 SECTION 2-2.3: TESTING
2-2.3.1 Operational Tests
2-2.3.2 Load Test
35 Chapter 2-3 Operator Training and Operation
SECTION 2-3.1: CRANE OPERATOR TRAINING
2-3.1.1 Purpose of Crane Operator Training
2-3.1.2 Crane Operator Training: General
2-3.1.3 Sources of Training Material
SECTION 2-3.2: TRAINING FOR PERSONS OTHER THAN CRANE OPERATORS
2-3.2.1 Scope
SECTION 2-3.3: OPERATION
2-3.3.1 Scope of Crane Operation
2-3.3.2 General Requirements
36 2-3.3.3 Responsibilities of Management (Owners/Users)
2-3.3.4 Responsibilities of Crane Operators
38 2-3.3.5 Responsibilities of Riggers
2-3.3.6 Responsibilities of Signalpersons
39 SECTION 2-3.4: PLANNING FOR LOAD HANDLING ACTIVITIES
2-3.4.1 Lift Planning
2-3.4.2 Planned Engineered Lifts
SECTION 2-3.5: HOIST LIMIT DEVICES (SWITCHES)
SECTION 2-3.6: SIGNALS
2-3.6.1 Standard Signals
40 2-3.6.2 Special Signals
SECTION 2-3.7: MISCELLANEOUS
2-3.7.1 Ladders
2-3.7.2 Cabs
2-3.7.3 Fire Extinguishers
SECTION 2-3.8: CRANE LOCKOUT/TAGOUT
2-3.8.1 General
41 Figure 2-3.6.1-1 Standard Hand Signals for Controlling Overhead and Gantry Cranes
42 Chapter 2-4 Maintenance Training and Maintenance
SECTION 2-4.1: MAINTENANCE TRAINING
2-4.1.1 Purpose of Maintenance Training
2-4.1.2 Crane Maintenance Training: General
2-4.1.3 Sources of Training
2-4.1.4 Responsibilities of Crane Maintenance Personnel
SECTION 2-4.2: CRANE MAINTENANCE
2-4.2.1 General Maintenance
43 2-4.2.2 Preventive Maintenance
2-4.2.3 Maintenance Procedure
2-4.2.4 Adjustments, Repairs, and Replacements
2-4.2.5 Lubrication
SECTION 2-4.3: ROPE REPLACEMENT AND MAINTENANCE
2-4.3.1 Rope Replacement
44 2-4.3.2 Rope Maintenance
SECTION 2-4.4 MAINTENANCE RECORDS

Related products

ASME B30.2 2022
$98.04