ASTM-A65 1995
$35.75
A65-87(1995) Standard Specification for Steel Track Spikes
| Published By | Publication Date | Number of Pages |
| ASTM | 1995 | 3 |
1.1 This specification covers steel track spikes used as fastenings between railroad rails, tie plates, and ties.
1.2 Two grades of spikes are described, Grades 1 and 2, previously known as ‘soft’ and ‘high carbon’ steel.
1.3 Supplementary Requirement (S1) specifying copper content is provided. It shall apply only when specified by the purchaser.
1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
Related products
-
ASTM-D982 1965
D982-65 Method of Test for Organic Nitrogen in Paper and Paperboard Published By Publication Date…
-
ASTM-A650 1998
A650/A650M-98 Standard Specification for Tin Mill Products, Black Plate, Double Reduced Published By Publication Date…
-
ASTM-D1714:1983 Edition
D1714-65(1983) Test Method for Water Absorptiveness of Fiberboard Specimens for Adhesives (Withdrawn 1990) Published By…
-
ASME STP TS 084 2018
ASME STP TS 084 2018 Orifice Flow Coefficient Equation Comparison Published By Publication Date Number…
-
ASTM-F21:1996 Edition
F21-65(1996) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test Published By Publication…
-
ASTM-D5458 1995
D5458-95 Standard Test Method for Peel Cling of Stretch Wrap Film Published By Publication Date…
-
ASTM-D5755 1995
D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron…
-
ASTM-A461:1965 Edition
A461-65 Specification for Precipitation Hardening Alloy Bars, Forgings, and Forging Stock for High-Temperature Service Published…
-
ASTM-A659 1997
A659/A659M-97 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25…
-
ASTM-D2009 1990
D2009-65(1990) Practice for Collection by Filtration and Determination of Mass, Number, and Optical Sizing of…
-
ASTM-D5 1965
D5-65 Standard Method Of Test For Penetration Of Bituminous Materials Published By Publication Date Number…
-
ASTM-A685 1984
A685-84 Specification for Machined Flat and Square Tool Steel Bars (Withdrawn 1985) Published By Publication…
-
ASTM-D5836 1995
D5836-95 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in…
-
ASTM-D445 1965
D445-65 Standard Method Of Test For Viscosity Of Transparent And Opaque Liquids (Kinematic And Dynamic…
-
ASTM-D1713:1986 Edition
D1713-65(1986) Test Method for Bonding Permanency of Water-or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing…
-
ASTM-D1717:1975 Edition
D1717-65(1975)e1 Method of Test for Analysis of Commercial Butane-Butiene Mixtures and Isolutylene by Gas Chromatography…
-
ASTM-B376 1985
B376-65(1985)e1 Test Method for Density of Sintered Metal Friction Materials Published By Publication Date Number…
-
ASTM-D5753 1995
D5753-95e1 Standard Guide for Planning and Conducting Borehole Geophysical Logging (Withdrawn 2005) Published By Publication…
-
ASTM-E429 1991
E429-78(1991)E01 Test Method for Measurement and Calculation of Reflecting Characteristics of Metallic Surfaces Using Integrating…
-
ASTM-A865 1997
A865-97 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for…
-
ASTM-D5826 1995
D5826-95 Standard Tables of Body Measurements for Children, Sizes 2 to 6x/7 Published By Publication…
-
ASTM-F22 1998
F22-65(1998) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test Published By Publication…
-
ACI 214.4 2021
ACI PRC-330-21: Commercial Concrete Parking Lots and Site Paving Design and Construction-Guide Published By Publication…
-
ASTM-A625 1998
A625/A625M-98 Standard Specification for Tin Mill Products, Black Plate, Single Reduced Published By Publication Date…
-
ASTM-C1318:1995 Edition
C1318-95 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium…
-
ASTM-D2204 1975
D2204-65(1975) Method of Test for Perspiration Resistance of Organic Coatings Published By Publication Date Number…
-
ASTM-A653 1998
A653/A653M-98a Standard Specification for Steel Sheet, Zinc-Coated (Galvinized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip…
-
ASTM-D1935:1965 Edition
D1935-65 Method of Test for Steam Emulsion of Electrical Insulating Oils of Petroleum Origin Published…
-
ASTM-A765 1998
A765/A765M-98a Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements…
-
ASTM-A645 1999
A645/A645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated…
-
ASTM-D39 2065
D39-65 Method of Test for Construction Characteristics of Woven Fabrics (Withdrawn 1965) Published By Publication…
-
ASME BPVC.II.B-2023 Section II, Materials, Part B, Nonferrous Material Specifications
ASME BPVC.II.B-2023 Section II, Materials, Part B, Nonferrous Material Specifications Published By Publication Date Number…
-
ASTM-A68 1965
A68-65 Specification for Carbon Steel Bars for Springs Published By Publication Date Number of Pages…
-
EEMUA 153:1996
Process Piping – Supplement to ASME B31.3 Published By Publication Date Number of Pages EEMUA…
-
ASTM-F1310:1990 Edition
F1310-90 Specification for 65-Gallon Dispensing Tank (Withdrawn 1996) Published By Publication Date Number of Pages…
-
ASTM-A565 1997
A565-97 Standard Specification for Martensitic Stainless Steel Bars, Forgings, and Forging Stock for High-Temperature Service…
-
ASTM-F155:1965 Edition
F155-65 Method of Test for for Temper of Strip and Sheet Metals for Electronic Devices…
-
ASTM-F1576:1995 Edition
F1576-95A Guide for Selection of Security Control Systems, Part II – Defining the Central Contol…
-
ASTM-A66 1995
A66-87(1995) Standard Specification for Steel Screw Spikes Published By Publication Date Number of Pages ASTM…
-
ASTM-A695 1995
A695-90b(1995)e1 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, for Fluid Power Applications (Withdrawn…
