ASTM-A667 2003
$35.75
A667/A667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
| Published By | Publication Date | Number of Pages |
| ASTM | 2003 | 2 |
1.1 This specification covers centrifugally cast cylinders with an outer layer of white cast iron and the remainder of the material of gray cast iron. These castings are suitable for pressure containing parts the design strength of which is based on the gray iron portion of the cylinder. These castings are suitable for service at temperatures up to 450F [230C].
1.2 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independent of the other. Combining values from the two systems may result in nonconformance with the specification.
1.3 The following safety hazards caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Materials and Manufacture Finish Physical Requirements Number of Tests Specimen Preparation |
| 2 | Test Method Inspection Acceptance and Certification Product Marking |
Related products
-
ASTM-A867 2008
A867-03(2008) Standard Specification for Iron-Silicon Relay Steels Published By Publication Date Number of Pages ASTM…
-
ASTM-E667 2003
E667-98(2003) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers Published By Publication Date Number of…
-
ASTM-A627 2003
A627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional…
-
ASTM-A677 2023
A677-16(2023) Standard Specification for Nonoriented Electrical Steel Fully Processed Types Published By Publication Date Number…
-
ASTM-A967 2013
A967/A967M-13 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts Published By Publication Date…
-
ASTM-A767 2000
A767/A767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement Published By Publication Date…
-
ASTM-C667 2001
C667-01 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures…
-
ASTM-A767 2005
A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement Published By Publication Date…
-
ASTM-A677 2005
A677-05 Standard Specification for Nonoriented Electrical Steel Fully Processed Types Published By Publication Date Number…
-
ASTM-C667 2009(Redline)
C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures…
-
ASTM-A668 2013(Redline)
A668/A668M-13 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use (Redline) Published…
-
ASTM-A967 2005
A967-05e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts Published By Publication Date…
-
ASTM-A867 2003
A867-03 Standard Specification for Iron-Silicon Relay Steels Published By Publication Date Number of Pages ASTM…
-
ASTM-E667 2009
E667-98(2009) Standard Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers Published By Publication Date Number of…
-
ASTM-A666 2003
A666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat…
-
ASTM-A967 2013(Redline)
A967/A967M-13 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts (Redline) Published By Publication…
-
ASTM-A666 2023
A666-23 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat…
-
ASTM-A967 2001
A967-01e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts Published By Publication Date…
-
ASTM-A662 2001
A662/A662M-01e1 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service…
-
ASTM-A967 2005
A967-05e2 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts Published By Publication Date…
-
ASTM-A668 2013
A668/A668M-13e1 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use Published By…
-
ASTM-A666 2023(Redline)
A666-23 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat…
-
ASTM-A367 2005
A367-60(2005) Standard Test Methods of Chill Testing of Cast Iron Published By Publication Date Number…
-
ASTM-A767 2009(Redline)
A767/A767M-09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement (Redline) Published By Publication…
-
ASTM-A467 2006
A467/A467M-01(2006) Standard Specification for Machine and Coil Chain Published By Publication Date Number of Pages…
-
ASTM-A697 2003
A697/A697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter…
-
ASTM-A662 2007
A662/A662M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service…
-
ASTM-A668 2001
A668/A668M-96(2001) Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use Published By…
-
ASTM-A677 2005
A677-05e1 Standard Specification for Nonoriented Electrical Steel Fully Processed Types Published By Publication Date Number…
-
ASTM-A664 2006
A664-06 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications Published By…
-
ASTM-A667 2008
A667/A667M-87(2008) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders Published…
-
ASTM-A697 2008
A697/A697M-03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter…
-
ASTM-A660 2001
A660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service Published By Publication…
-
ASTM-A657 2008
A657/A657M-03(2008)e1 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced…
-
ASTM-A664 2006
A664-06e1 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications Published By…
-
ASTM-A657 2003
A657/A657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced…
-
ASTM-B667 2003
B667-97(2003)e1 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance…
-
ASTM-A663 2000
A663/A663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties Published By Publication Date…
-
ASTM-C667 2009
C667-09 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures…
-
ASTM-A662 2003
A662/A662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service…
