🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASTM-B170:2010 Edition

ASTM-B170:2010 Edition

$40.63

B170-99(2010) Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

Published By Publication Date Number of Pages
ASTM 2010 10
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Categories: ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

ASTM B170-99-Reapproved2010

Historical Standard: Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

ASTM B170

Scope

1.1 This specification establishes the requirements for two grades of oxygen-free electrolytic copper wire bars, billets, and cakes produced without the use of metallic or metaloidal deoxidizers.

1.2 Oxygen-free copper, as described herein, is defined as copper containing oxygen not in excess of 0.0010 % (10 ppm).

1.2.1 Grade 1 copper (UNS C10100) corresponds to the designation OFE in Classification B224.

1.2.2 Grade 2 copper (UNS C10200) corresponds to the designation OF in Classification B224.

1.2.3 Grade 2 copper may be used to produce OFS designation coppers corresponding to UNS C10400, C10500, and C10700.

1.3 Although this specification includes certain UNS designations as described in Practice E527, these designations are for cross reference only and are not specification requirements. In case of conflict, Specification B170 shall govern.

1.4 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only, except for analytical measurements where SI units are the norm.

1.5 The following hazard caveat pertains only to Section 13 and Annex A1, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Keywords

billets; cakes; oxygen free; refinery shapes; silver containing; wire bars; Antimony content; Arsenic content; Bismuth content; Cadmium content; Calibration–metals/alloys analysis instrumentation; Combustion; Composition analysis–metals/alloys; Copper (refined/refinery shapes)–specifications; Embrittlement; Inert gas fusion; Infrared (IR) analysis–metals/alloys; Iron content–copper; Lead content–metals; Manganese content–Cu/Cu alloys; Mercury; Nickel content–miscellaneous metals/alloys; Oxygen content–metals/alloys; Oxygen-free (deoxidized) copper; Selenium content; Silver content; Specimen preparation (for testing)–metals/alloys; Spectrophotometry–atomic absorption; Spectroscopy–atomic absorption; Sulfur–Cu/Cu alloys; Tellurium content–Cu/Cu alloys; Thermal conductance/conductivity; Tin content–Cu/Cu alloys; Zinc content

ICS Code

ICS Number Code 77.150.30 (Copper products)

DOI: 10.1520/B0170-99R10

PDF Catalog

PDF Pages PDF Title
1 Scope
Referenced Documents
Terminology
Ordering Information
2 Chemical Composition
Physical Properties
Dimensions, Mass, and Permissible Variations
Workmanship, Finish and Appearance
Sampling
TABLE 1
3 Number of Tests and Retests
Specimen Preparation
4 Test Methods
Significance of Numerical Limits
Inspection
Rejection and Rehearing
5 Certification
Test Report
Product Marking
Packaging and Package Marking
Keywords
A1. TEST METHODS FOR DETERMINATION OF COMPLIANCE WITH CHEMICAL COMPOSITION REQUIREMENTS OF SPECIFICATION B170 FOR OXYGEN-FREE ELECTROLYTIC COPPER-REFINERY SHAPES
A1.1 Scope
A1.2 Significance and Use
A1.3 Apparatus
A1.4 Reagents and Material
A1.5 Sampling
A1.6 Rounding Calculated Values
6 A1.7 Scope
A1.8 Summary of Test Method
A1.9 Significance and Use
A1.10 Interferences
A1.11 Hazards
A1.12 Apparatus
A1.13 Reagents and Materials
7 A1.14 Calibration
A1.15 Procedure
A1.16 Calculation
TABLE A1.1
8 A1.17 Precision and Bias
A1.18 Scope
A1.19 Summary of Test Method
A1.20 Significance and Use
A1.21 Interferences
A1.22 Apparatus
A1.23 Reagents and Materials
A1.24 Hazards
A1.25 Sample Preparation
A1.26 Preparation of Apparatus
9 A1.27 Calibration
A1.28 Procedure
A1.29 Calculation
A1.30 Precision and Bias
10 A1.31 Scope
A1.32 Summary of Test Method
A1.33 Interferences
A1.34 Apparatus
A1.35 Reagents and Material
A1.36 Hazards
A1.37 Preparation of Apparatus
A1.38 Sample Preparation
A1.39 Calibration
A1.40 Procedure
A1.41 Calculation
A1.42 Precision and Bias

Related products

ASTM-B170
$40.63