ASTM-B961:2013 Edition
$40.63
B961-13 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
Published By | Publication Date | Number of Pages |
ASTM | 2013 | 8 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This specification covers uninsulated silver-coated soft or annealed copper and copper alloy stranded conductors for use in electronic space application.
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. This precautionary caveat pertains only to Section 9 .
Standard Title | B961-13 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application |
---|---|
Published Code | ASTM |
Publication Date | 2013 |
Pages Count | 8 |
ICS Codes | 29.060.20 - Cables |
Related products
-
ASTM-B916:2007 Edition
B916-01(2007) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal Published By…
-
ASTM-B861:2005 Edition
B861-05e1 Standard Specification for Titanium and Titanium Alloy Seamless Pipe Published By Publication Date Number…
-
ASTM-B971:2014 Edition
B971-10(2014) Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in…
-
ASTM-B931:2009 Edition(Redline)
B931-09 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy…
-
ASTM-B961:2019 Edition
B961-13(2019) Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space…
-
ASTM-B961:2008 Edition
B961-08 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space…
-
ASTM-B161:2009 Edition(Redline)
B161-05(2009) Standard Specification for Nickel Seamless Pipe and Tube (Redline) Published By Publication Date Number…
-
ASTM-B911:2012 Edition
B911/B911M-12 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP) Published By Publication Date Number of…
-
ASTM-B761:2011 Edition
B761-06(2011) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by…
-
ASTM-C961:2011 Edition
C961-06(2011) Standard Test Method for Lap Shear Strength of Sealants Published By Publication Date Number…
-
ASTM-A961:2005 Edition
A961/A961M-05 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for…
-
ASTM-B691:2007 Edition(Redline)
B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire…
-
ASTM-B561:2012 Edition
B561-94(2012) Standard Specification for Refined??? Platinum Published By Publication Date Number of Pages ASTM 2012…
-
ASTM-B96/B96M 2020(Redline)
B96/B96M-20 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes…
-
ASTM-B561:2023 Edition(Redline)
B561-23 Standard Specification for Refined Platinum (Redline) Published By Publication Date Number of Pages ASTM…
-
ASTM-B96/B96M 2020
B96/B96M-20 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes…
-
ASTM-A961:2011 Edition
A961/A961M-11 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for…
-
ASTM-C961:2001 Edition
C961-01 Standard Test Method for Lap Shear Strength of Hot-Applied Sealants Published By Publication Date…
-
ASTM-B861:2019 Edition(Redline)
B861-19 Standard Specification for Titanium and Titanium Alloy Seamless Pipe (Redline) Published By Publication Date…
-
ASTM-E961:2013 Edition
E961-97(2013) Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable Published By Publication Date Number…
-
ASTM-B691:2007 Edition
B691-02(2007) Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire…
-
ASTM-B916:2021 Edition
B916-01(2021) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal Published By…
-
ASTM-B961:2013 Edition(Redline)
B961-13 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space…
-
ASTM-B161:1993 Edition
B161-93 Standard Specification for Nickel Seamless Pipe and Tube Published By Publication Date Number of…
-
ASTM-B661:2003 Edition
B661-03 Standard Practice for Heat Treatment of Magnesium Alloys Published By Publication Date Number of…
-
ASTM-B96/B96M 2016
B96/B96M-16 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes…
-
ASTM-F961:2014 Edition(Redline)
F961-14 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035) (Redline) Published By…
-
ASTM-B931:2023 Edition
B931-23 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy…
-
ASTM-B951:2010 Edition(Redline)
B951-10 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought (Redline) Published…
-
ASTM-B96/B96M 2016(Redline)
B96/B96M-16 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes…
-
ASTM-B951:2008 Edition
B951-08 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought Published By…
-
ASTM-B911:2000 Edition
B911/B911M-00 Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP) Published By Publication Date Number of…
-
ASTM-A961:2004 Edition
A961-04 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for…
-
ASTM-B941:2010 Edition(Redline)
B941-10 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes (Redline) Published By…
-
ASTM-B941:2005 Edition
B941-05 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes Published By Publication…
-
ASTM-B971:2010 Edition
B971-10 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in…
-
ASTM-B761:2006 Edition
B761-06 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by…
-
ASTM-A961:2000 Edition
A961-00b Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for…
-
ASTM-B361:2008 Edition
B361-08 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings Published By Publication Date…
-
ASTM-B861:2008 Edition
B861-08a Standard Specification for Titanium and Titanium Alloy Seamless Pipe Published By Publication Date Number…