🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASTM-C1193:2005 Edition

ASTM-C1193:2005 Edition

$58.50

C1193-05a Standard Guide for Use of Joint Sealants

Published By Publication Date Number of Pages
ASTM 2005 32
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Categories: ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

1.1 This guide describes the use of a cold liquid-applied sealant for joint sealing applications. Including joints on buildings and related adjacent areas, such as plazas, decks, and pavements for vehicular or pedestrian use, and types of construction other than highways and airfield pavements and bridges. Information in this guide is primarily applicable to a single and multi-component, cold liquid-applied joint sealant and secondarily to a precured sealant when used with a properly prepared joint opening and substrate surfaces.

1.2 An elastomeric or non-elastomeric sealant described by this guide should meet the requirements of Specification C 834, C 920, or C 1311.

1.3 This guide does not provide information or guidelines for the use of a sealant in a structural sealant glazing application. Guide C 1401 should be consulted for this information. Additionally, it also does not provide information or guidelines for the use of a sealant in an insulating glass unit edge seal used in a structural sealant glazing application. Guide C 1249 should be consulted for this information.

1.4 Practice C 919 should be consulted for information and guidelines for the use of a sealant in an application where an acoustic joint seal is required.

1.5 This guide also does not provide information relative to the numerous types of sealant that are available nor specific generic sealant properties, such as hardness, tack-free time, or curing process, among others. Guide C 1299 should be consulted for information on generally accepted comparative values for the characteristics and properties of the more common generic types of liquid-applied sealant.

1.6 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are provided for information only.

1.7 The Committee with jurisdiction for this standard is not aware of any comparable standards published by other organizations.

1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

1.9 The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.

PDF Catalog

PDF Pages PDF Title
1 Scope
Referenced Documents
2 Terminology
Significance and Use
General Considerations
6 Substrate
7 Cleaner
Primer
8 Sealant Backing
10 Joint Filler
Bond Breaker
FIG. 1
11 Liquid-Applied Sealant
FIG. 2
15 Precured Sealant
FIG. 3
16 Sealant Joints
FIG. 4
17 FIG. 5
FIG. 6
FIG. 7
18 FIG. 8
19 Designing a Sealant Joint for Movement
20 FIG. 9
21 Sealant Installation
24 FIG. 10
26 Sealant Joint Maintenance
Certification, Marking, Shipping, Preservation, and Safety
27 Keywords
X1. TEST METHODS TO DETERMINE SEALANT ADHESION CHARACTERISTICS IN SITU
X1.1 Method A, Field-Applied Sealant Joint Hand Pull Tab
FIG. X1.1
28 X1.2 Method B, Exposed Surface Finish Hand Pull Tab
X1.3 Method C, Field-Applied Sealant Joint Hand Pull Flap
FIG. X1.2
29 X1.4 Method D, Water Immersion
X2. General Index to Topics and Headings as Listed in the Guide
X2.1 Index
31 REFERENCES

Related products

ASTM-C1193
$58.50