ASTM-C1347:2002 Edition
$40.63
C1347-02 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis
Published By | Publication Date | Number of Pages |
ASTM | 2002 | 8 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This practice covers dissolution treatments for uranium materials that are applicable to the test methods used for characterizing these materials for uranium elemental, isotopic, and impurities determinations. Dissolution treatments for the major uranium materials assayed for uranium or analyzed for other components are listed.
1.2 The treatments, in order of presentation, are as follows:
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 7.
Dissolution of Uranium Metal and Oxide with Nitric Acid | 8.1 |
---|---|
Dissolution of Uranium Oxides with Nitric Acid and Residue Treatment | 8.2 |
Dissolution of Uranium-Aluminum Alloys in Hydrochloric Acid with Residue Treatment | 8.3 |
Procedure Title | Section |
Dissolution of Refractory Uranium-Containing Material by Carbonate Fusion | 8.5 |
Dissolution of Uranium-Aluminum Alloys Uranium Scrap and Ash, and RefractoryUranium-Containing Materials by Microwave Treatment | 8.6 |
Dissolution of Uranium Scrap and Ash by Leaching with Nitric Acid and Treatment of Residue by Carbonate Fusion | 8.4 |
ICS Codes | 27.120.30 - Fissile materials and nuclear fuel technology |
Related products
-
ASTM-F1347:2006 Edition
F1347-91(2006) Standard Specification for Manually Operated Fueling Hose Reels Published By Publication Date Number of…
-
ASTM-C1397:2009 Edition
C1397-09 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and…
-
ASTM-C1357:2004 Edition
C1357-04a Standard Test Methods for Evaluating Masonry Bond Strength Published By Publication Date Number of…
-
ASTM-C1348:2001 Edition
C1348-01 Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5…
-
ASTM-C1047:2004 Edition
C1047-99(2004) Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base Published By Publication…
-
ASTM-C1437:2015 Edition
C1437-15 Standard Test Method for Flow of Hydraulic Cement Mortar Published By Publication Date Number…
-
ASTM-E1347:2003 Edition
E1347-03 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry Published By…
-
ASTM-C1340:2010 Edition
C1340/C1340M-10 Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing…
-
ASTM-C1327:2008 Edition(Redline)
C1327-08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics (Redline) Published By Publication…
-
ASTM-C1341:2023 Edition
C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites Published By…
-
ASTM-C1347:2008 Edition
C1347-08 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis Published By Publication…
-
ASTM-C1374:2018 Edition(Redline)
C1374-18 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation…
-
ASTM-C1327:2019 Edition
C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics Published By Publication Date…
-
ASTM-C1047:2014 Edition
C1047-14a Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base Published By Publication…
-
ASTM-C1349:1996 Edition
C1349-96 Standard Specification for Architectural Flat Glass Clad Polycarbonate Published By Publication Date Number of…
-
ASTM-F1347:2018 Edition
F1347-91(2018) Standard Specification for Manually Operated Fueling Hose Reels Published By Publication Date Number of…
-
ASTM-C1347:2014 Edition
C1347-08(2014)e1 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis Published By Publication…
-
ASTM-C1341:2006 Edition
C1341-06 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites Published By…
-
ASTM-C1341:2013 Edition
C1341-13 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites Published By…
-
ASTM-C1347:2023 Edition
C1347-08(2023) Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis Published By Publication…
-
ASTM-C1349:2017 Edition
C1349-17 Standard Specification for Architectural Flat Glass Clad Polycarbonate Published By Publication Date Number of…
-
ASTM-C1347:2008 Edition(Redline)
C1347-08 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis (Redline) Published By…
-
ASTM-C1345:2008 Edition(Redline)
C1345-08 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in…
-
ASTM-C1348:1996 Edition
C1348-96 Standard Specification for Blended Uranium Oxides with a 235U Content of Less Than 5…
-
ASTM-C1307:2015 Edition(Redline)
C1307-15 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry (Redline) Published…
-
ASTM-F1347:2012 Edition
F1347-91(2012) Standard Specification for Manually Operated Fueling Hose Reels Published By Publication Date Number of…
-
ASTM-C1147:2001 Edition
C1147-01 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics Published…
-
ASTM-C1337:2010 Edition
C1337-10 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under…
-
ASTM-C1346:2008 Edition(Redline)
C1346-08 Standard Practice for Dissolution of UF6 from P-10 Tubes (Redline) Published By Publication Date…
-
ASTM-C1348:2008 Edition(Redline)
C1348-01(2008) Standard Specification for Blended Uranium Oxides with 235U Content of Less Than 5 %…
-
ASTM-C1307:2014 Edition
C1307-14 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry Published By…
-
ASTM-C1547:2002 Edition
C1547-02 Standard Classification for Fusion-Cast Refractory Blocks and Shapes Published By Publication Date Number of…
-
ASTM-C1437:1999 Edition
C1437-99 Standard Test Method for Flow of Hydraulic Cement Mortar Published By Publication Date Number…
-
ASTM-C1547:2022 Edition
C1547-02(2022) Standard Classification for Fusion-Cast Refractory Blocks and Shapes Published By Publication Date Number of…
-
ASTM-C1147:2014 Edition(Redline)
C1147-14 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics (Redline)…
-
ASTM-C1047:2009 Edition
C1047-09 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base Published By Publication…
-
ASTM-C1346:2014 Edition
C1346-08(2014) Standard Practice for Dissolution of UF6 from P-10 Tubes Published By Publication Date Number…
-
ASTM-C1647:2013 Edition
C1647-13 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in…
-
ASTM-C1341:2005 Edition
C1341-00(2005) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites Published By…
-
ASTM-C1337:2005 Edition
C1337-96(2005) Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under…