ASTM-D1655:2012 Edition(Redline)

This specification covers purchases of aviation turbine fuel under contract and is intended primarily for use by purchasing agencies. This specification does not include all fuels satisfactory for reciprocating aviation turbine engines, but rather, defines the following specific types of aviation fuel for civil use: Jet A; and Jet A-1. The fuels shall be sampled and tested appropriately to examine their conformance to detailed requirements as to composition, volatility, fluidity, combustion, corrosion, thermal stability, contaminants, and additives.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This specification covers the use of purchasing agencies in formulating specifications for purchases of aviation turbine fuel under contract.

1.2 This specification defines specific types of aviation turbine fuel for civil use in the operation and certification of aircraft and describes fuels found satisfactory for the operation of aircraft and engines. The specification can be used as a standard in describing the quality of aviation turbine fuels from the refinery to the aircraft.

1.3 This specification does not include all fuels satisfactory for aviation turbine engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.

1.4 Aviation turbine fuels defined by this specification may be used in other than turbine engines that are specifically designed and certified for this fuel.

1.5 This specification no longer includes wide-cut aviation turbine fuel (Jet B). FAA has issued a Special Airworthiness Information Bulletin which now approves the use of Specification D6615 to replace Specification D1655 as the specification for Jet B and refers users to this standard for reference.

1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D56 Test Method for Flash Point by Tag Closed Cup Tester D86 Test Method for Distillation of Petroleum Products at Atmospheric Pressure D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester D129 Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) D130 Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test D156 Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) D240 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter D323 Test Method for Vapor Pressure of Petroleum Products (Reid Method) D381 Test Method for Gum Content in Fuels by Jet Evaporation D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity) D1266 Test Method for Sulfur in Petroleum Products (Lamp Method) D1298 Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method D1319 Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption D1322 Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel D1405 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels D1660 Method of Test for Thermal Stability of Aviation Turbine Fuels D1840 Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry D2276 Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling D2386 Test Method for Freezing Point of Aviation Fuels D2622 Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry D2624 Test Methods for Electrical Conductivity of Aviation and Distillate Fuels D2887 Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography D2892 Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column) D3120 Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry D3227 Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) D3240 Test Method for Undissolved Water In Aviation Turbine Fuels D3241 Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels D3242 Test Method for Acidity in Aviation Turbine Fuel D3338 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels D3343 Test Method for Estimation of Hydrogen Content of Aviation Fuels D3701 Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester D3948 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer D4052 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter D4057 Practice for Manual Sampling of Petroleum and Petroleum Products D4171 Specification for Fuel System Icing Inhibitors D4176 Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) D4294 Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry D4306 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination D4529 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels D4809 Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method) D4865 Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems D4952 Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test) D4953 Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method) D5001 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE) D5006 Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels D5190 Test Method for Vapor Pressure of Petroleum Products (Automatic Method) D5191 Test Method for Vapor Pressure of Petroleum Products (Mini Method) D5452 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration D5453 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence D5972 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method) D6045 Test Method for Color of Petroleum Products by the Automatic Tristimulus Method D6379 Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates–High Performance Liquid Chromatography Method with Refractive Index Detection D6469 Guide for Microbial Contamination in Fuels and Fuel Systems D6615 Specification for Jet B Wide-Cut Aviation Turbine Fuel D6751 Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels D7153 Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method) D7154 Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) D7524 Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels–High Performance Liquid Chromatograph (HPLC) Method D7566 Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

Energy Institute Standards

IP590 Determination of fatty acid methyl esters (FAME) in aviation fuel–HPLC evaporative light scattering detector method

ANSI Standard

ANSI863 Report of Test Results

Other Standards

EN14214 Automotive fuels – Fatty acid methyl esters (FAME) for diesel engines – Requirements and test methods Available from European Committee for Standardization (CEN), 36 rue de Stassart, B-1050, Brussels, Belgium, http://www.cenorm.be.

Keywords

aviation turbine fuel; avtur; Jet A; Jet A-1; jet fuel; turbine fuel ; Aviation turbine fuels–specifications; Petroleum products–specifications

ICS Code

ICS Number Code 75.160.20 (Liquid fuels)

DOI: 10.1520/D1655-12 ASTM International is a member of CrossRef.

Citing ASTM Standards

[Back to Top]