ASTM-D4532 2010
$40.63
D4532-10 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 6 |
1.1 This test method provides details for the determination of respirable dust concentration defined in terms of international convention in a range from 0.5 to 10 mg/m 3 in workplace atmospheres. Specifics are given for sampling and analysis using any one of a number of commercially available cyclone samplers.
1.2 The limitations on the test method are a minimum weight of 0.1 mg of dust on the filter, and a maximum loading of 0.3 mg/m 2 on the filter. The test method may be used at higher loadings if the flow rate can be maintained constant.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This test method contains notes that are explanatory and are not part of the mandatory requirements of the method.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology |
| 2 | Summary of Test Method Significance and Use Apparatus Preparation of Samplers Prior to Sampling FIG. 1 |
| 3 | Sampling Calibration and Standardization Procedure Calculation |
| 4 | Report TABLE 1 |
| 5 | Keywords REFERENCES |
Related products
-
ASTM-D4537 2018
D4537-12(2018) Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining…
-
ASTM-D4502 2019
D4502-92(2019) Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints Published By Publication…
-
ASTM-D4535 2013
D4535-13e2 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer Published By…
-
ASTM-D4032 2016
D4032-08(2016) Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure Published By…
-
ASTM-D4530 2011
D4530-11 Standard Test Method for Determination of Carbon Residue (Micro Method) Published By Publication Date…
-
ASTM-D4552 2010
D4552/D4552M-10 Standard Practice for Classifying Hot-Mix Recycling Agents Published By Publication Date Number of Pages…
-
ASTM-D2532 2010(Redline)
D2532-10 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of…
-
ASTM-D4832 2010
D4832-10 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test…
-
ASTM-D4532 2015(Redline)
D4532-15 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers (Redline) Published…
-
ASTM-D4632 2013
D4632/D4632M-08(2013)e1 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles Published By Publication…
-
ASTM-D4542 2001
D4542-95(2001) Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content…
-
ASTM-D4530 2011(Redline)
D4530-11 Standard Test Method for Determination of Carbon Residue (Micro Method) (Redline) Published By Publication…
-
ASTM-D4592 2012(Redline)
D4592-12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life (Redline) Published…
-
ASTM-D4332 2013(Redline)
D4332-13 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing (Redline) Published By…
-
ASTM-D5432 2000
D5432-93(2000)e1 Standard Performance Specification for Blanket Products for Institutional and Household Use (Withdrawn 2009) Published…
-
ASTM-D4832 2016
D4832-16e1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test…
-
ASTM-D4232 2001
D4232-01 Standard Performance Specification for Men’s and Women’s Dress and Vocational Career Apparel Fabrics Published…
-
ASTM-D4332 2013
D4332-13 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing Published By Publication…
-
ASTM-D4582 2010
D4582-10 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for…
-
ASTM-D4562 2019
D4562-01(2019) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen Published By Publication…
-
ASTM-D4533 2011
D4533-11 Standard Test Method for Trapezoid Tearing Strength of Geotextiles Published By Publication Date Number…
-
ASTM-D4532 2015
D4532-15 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers Published By…
-
ASTM-D4535 2013
D4535-13 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer Published By…
-
ASTM-D5432 2019
D5432-12(2019) Standard Performance Specification for Blanket Products for Institutional and Household Use Published By Publication…
-
ASTM-D4539 2010
D4539-10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) Published…
-
ASTM-D4572 2017
D4572-89(2017) Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur Published By Publication Date…
-
ASTM-D4539 2010(Redline)
D4539-10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) (Redline)…
-
ASTM-D4582 2010(Redline)
D4582-10 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for…
-
ASTM-D4539 2017(Redline)
D4539-17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) (Redline)…
-
ASTM-D2532 2010
D2532-10 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of…
-
ASTM-D4530 2015
D4530-15 Standard Test Method for Determination of Carbon Residue (Micro Method) Published By Publication Date…
-
ASTM-D4537 2012
D4537-12 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining…
-
ASTM-D2532 2014(Redline)
D2532-14 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of…
-
ASTM-D4533 2011(Redline)
D4533-11 Standard Test Method for Trapezoid Tearing Strength of Geotextiles (Redline) Published By Publication Date…
-
ASTM-D4832 2010(Redline)
D4832-10 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test…
-
ASTM-D4542 2015(Redline)
D4542-15 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content…
-
ASTM-D4552 2010(Redline)
D4552/D4552M-10 Standard Practice for Classifying Hot-Mix Recycling Agents (Redline) Published By Publication Date Number of…
-
ASTM-D4522 2014
D4522-14 Standard Performance Specification for Feather and Down Fillings for Textile Products Published By Publication…
-
ASTM-D4538 2013(Redline)
D4538-13 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities (Redline)…
-
ASTM-D4539 2016
D4539-16 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) Published…
