ASTM-D5273 2012
$35.75
D5273-92(2012) Standard Guide for Analysis of Propylene Concentrates
Published By | Publication Date | Number of Pages |
ASTM | 2012 | 4 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This guide covers a list of the major grades of propylene concentrates produced in North America. It includes possible components and test methods, both ASTM and other, either actually used, or believed to be in use, to test for these properties. This guide is not intended to be used or construed as a set of specifications for any grade of propylene concentrate.
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Title | D5273-92(2012) Standard Guide for Analysis of Propylene Concentrates |
---|---|
Published Code | ASTM |
Publication Date | 2012 |
Pages Count | 4 |
ICS Codes | 71.080.10 - Aliphatic hydrocarbons |
Related products
-
ASTM-D5270 2014
D5270-96(2014) Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers…
-
ASTM-D5373 2016(Redline)
D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of…
-
ASTM-D5279 2021(Redline)
D5279-21 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion (Redline) Published By Publication…
-
ASTM-D5275 2011(Redline)
D5275-11 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids…
-
ASTM-D5275 2017(Redline)
D5275-17 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids…
-
ASTM-D5273 2018
D5273-18 Standard Guide for Analysis of Propylene Concentrates Published By Publication Date Number of Pages…
-
ASTM-D5275 2017
D5275-17 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids…
-
ASTM-D5373 2016
D5373-16 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of…
-
ASTM-D5277 2015
D5277-92(2015) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester Published…
-
ASTM-D5293 2017(Redline)
D5293-17 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C…
-
ASTM-D5573 2019
D5573-99(2019) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints Published By Publication Date…
-
ASTM-D3273 2012
D3273-12 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior…
-
ASTM-D5373 2014
D5373-14 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of…
-
ASTM-D5293 2010
D5293-10 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35°C Using…
-
ASTM-D5278 2013(Redline)
D5278/D5278M-09(2013) Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing) (Redline) Published By…
-
ASTM-D5573 2012
D5573-99(2012) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints Published By Publication Date…
-
ASTM-D3273 2016(Redline)
D3273-16 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior…
-
ASTM-D5279 2013(Redline)
D5279-13 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion (Redline) Published By Publication…
-
ASTM-D5773 2021
D5773-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling…
-
ASTM-D5275 2016
D5275-16 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids…
-
ASTM-D5237 2013
D5237-05(2013) Standard Guide for Evaluating Fabric Softeners Published By Publication Date Number of Pages ASTM…
-
ASTM-D5273 2002
D5273-92(2002) Standard Guide for Analysis of Propylene Concentrates Published By Publication Date Number of Pages…
-
ASTM-D2273 2012
D2273-08(2012) Standard Test Method for Trace Sediment in Lubricating Oils Published By Publication Date Number…
-
ASTM-D5283 2018(Redline)
D5283-18 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance…
-
ASTM-D3273 2021
D3273-21 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior…
-
ASTM-D5293 2015
D5293-15 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C…
-
ASTM-D5073 2021
D5073-02(2021) Standard Practice for Depth Measurement of Surface Water Published By Publication Date Number of…
-
ASTM-D3273 2012(Redline)
D3273-12 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior…
-
ASTM-D4273 2011(Redline)
D4273-11 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether…
-
ASTM-D5773 2015
D5773-15 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method) Published…
-
ASTM-D6273 2014
D6273-14 Standard Test Methods for Natural Gas Odor Intensity Published By Publication Date Number of…
-
ASTM-D5270 2002
D5270-96(2002) Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers…
-
ASTM-D5673 2010(Redline)
D5673-10 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry (Redline) Published…
-
ASTM-D5673 2016
D5673-16 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry Published By…
-
ASTM-D5973 2012
D5973-97(2012) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion…
-
ASTM-D3273 2012
D3273-12e1 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior…
-
ASTM-D4273 2018(Redline)
D4273-18 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether…
-
ASTM-D5723 2002
D5723-95(2002) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence…
-
ASTM-D5273 2018(Redline)
D5273-18 Standard Guide for Analysis of Propylene Concentrates (Redline) Published By Publication Date Number of…
-
ASTM-D5274 2019
D5274-00(2019) Standard Guide for Analysis of 1,3–Butadiene Product Published By Publication Date Number of Pages…