ASTM-D801:2013 Edition
$35.75
D801-02(2013) Standard Test Methods for Sampling and Testing Dipentene
Published By | Publication Date | Number of Pages |
ASTM | 2013 | 2 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 These test methods cover procedures for sampling and testing dipentene and related terpene solvents, consisting chiefly of monocyclic terpene hydrocarbons distilling above the range for turpentine.
1.2 The procedures given in these test methods appear in the following order:
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Section |
|
Composition | 11 |
Moisture | 13 |
Color | 7 |
Detection and Removal of Separated Water | 5 |
Flash Point | 12 |
Refractive Index | 10 |
Sampling | 4 |
Appearance | 6 |
Odor | 8 |
Specific Gravity | 9 |
ICS Codes | 87.060.30 - Solvents |
This document does not provide a preview.
Related products
-
ASTM-D8011:2017 Edition
D8011-17 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as…
-
ASTM-D8061:2016 Edition
D8061-16 Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF3CBr=CH2) Published By Publication Date…
-
ASTM-D8019:2015 Edition
D8019-15 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of…
-
ASTM-D4801:2007 Edition
D4801-07 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater…
-
ASTM-A801:2004 Edition
A801-04 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) Published…
-
ASTM-D8016:2022 Edition
D8016-22 Standard Test Method for Silica, Precipitated, Hydrated—Sears Number Published By Publication Date Number of…
-
ASTM-A801:2009 Edition(Redline)
A801-09 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) (Redline)…
-
ASTM-D801:2009 Edition
D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene Published By Publication Date Number of…
-
ASTM-D5801:2006 Edition
D5801-95(2006)e1 Standard Test Method for Toughness and Tenacity of Bituminous Materials Published By Publication Date…
-
ASTM-E801:1995 Edition
E801-91(1995)e1 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices Published By Publication…
-
ASTM-D841:2013 Edition(Redline)
D841-13 Standard Specification for Nitration Grade Toluene (Redline) Published By Publication Date Number of Pages…
-
ASTM-D801:2017 Edition
D801-02(2017) Standard Test Methods for Sampling and Testing Dipentene Published By Publication Date Number of…
-
ASTM-D801:2002 Edition
D801-02 Standard Test Methods for Sampling and Testing Dipentene Published By Publication Date Number of…
-
ASTM-B801:2012 Edition
B801-07(2012) Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or…
-
ASTM-D8021:2023 Edition
D8021-23 Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture…
-
ASTM-D8016:2022 Edition(Redline)
D8016-22 Standard Test Method for Silica, Precipitated, Hydrated—Sears Number (Redline) Published By Publication Date Number…
-
ASTM-D8010:2015 Edition
D8010-15 Standard Practice for Determination of Water Soluble Alkali Content in Coal Published By Publication…
-
ASTM-D3801:2019 Edition
D3801-19 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a…
-
ASTM-D8019:2023 Edition(Redline)
D8019-23 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of…
-
ASTM-D861:2007 Edition(Redline)
D861-07 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers,…
-
ASTM-D861:1995 Edition
D861-95 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers,…
-
ASTM-D8081:2021 Edition
D8081-17(2021)e1 Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow…
-
ASTM-D3801:2010 Edition(Redline)
D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a…
-
ASTM-D801:2022 Edition
D801-02(2022) Standard Test Methods for Sampling and Testing Dipentene Published By Publication Date Number of…
-
ASTM-D8011:2018 Edition(Redline)
D8011-18 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as…
-
ASTM-D861:2001 Edition
D861-01a Standard Practice for Use of the Tex System to Designate Linear Density of Fibers,…
-
ASTM-D8031:2016 Edition
D8031-16 Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration…
-
ASTM-D501:2016 Edition
D501-03(2016) Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents Published By Publication…
-
ASTM-D6801:2007 Edition(Redline)
D6801-07 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials…
-
ASTM-D861:2001 Edition
D861-01 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers,…
-
ASTM-D8501:2023 Edition
D8501-23 Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK)…
-
ASTM-D861:2007 Edition
D861-07 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers,…
-
ASTM-D8018:2020 Edition
D8018-15(2020) Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction…
-
ASTM-D6801:2015 Edition
D6801-07(2015) Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials…
-
ASTM-D8401:2024 Edition
D8401-24 Standard Test Method for Identification of Polymer Type and Quantity of Microplastic Particles and…
-
ASTM-D801:2009 Edition(Redline)
D801-02(2009) Standard Test Methods for Sampling and Testing Dipentene (Redline) Published By Publication Date Number…
-
ASTM-D871:2004 Edition
D871-96(2004) Standard Test Methods of Testing Cellulose Acetate Published By Publication Date Number of Pages…
-
ASTM-D8016:2018 Edition(Redline)
D8016-18 Standard Test Method for Silica, Precipitated, Hydrated—Sears Number (Redline) Published By Publication Date Number…
-
ASTM-A801:2021 Edition(Redline)
A801-21 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) (Redline)…
-
ASTM-D841:2013 Edition
D841-13 Standard Specification for Nitration Grade Toluene Published By Publication Date Number of Pages ASTM…