ASTM-E2427 2005
$35.75
E2427-05 Standard Test Method for Acceptance by Performance Testing of U.S. Standard Test Sieves
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 4 |
1.1 This test method is a performance test for acceptance of U.S. Standard test sieves. It is an alternative method for checking the accuracy and long term reliability of test sieves by other than the use of Specification E 11 inspection methods. Since it is not possible to adjust the measuring capability of a test sieve, the method is designed to offer a verification procedure based on sieving performance, by comparison to a standard reference. This method is not proposed as an alternative to the inspection methods in accordance with Specifications E 11, E 323, E 454, E 674 or the procedures in Manual 32 to confirm sieve compliance thereto.
1.2 This test method compares the performance of a sieve against a calibration sieve, using a known quantity of reference material such that the long-term stability of sieves can be measured.
This test method does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Significance and Use Interferences |
| 2 | Apparatus Hazards Preparation of Apparatus Preparation of Reference Material Calibration and Standardization |
| 3 | Procedure Calculation or Interpretation of Results Report Precision and Bias |
| 4 | A1. ANNEX “A” |
Related products
-
ASTM-E2527 2009
E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under…
-
ASTM-E2428 2015
E2428-15 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque…
-
ASTM-E2420 2015
E2420-15 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities Published By Publication…
-
ASTM-F2427 2005
F2427-05a Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-E2472 2006
E2472-06e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions…
-
ASTM-E2457 2006
E2457-06 Standard Terminology for Healthcare Informatics Published By Publication Date Number of Pages ASTM 2006…
-
ASTM-D2427 2001
D2427-92(2001) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas…
-
ASTM-E2327 2004
E2327-04 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis Published By Publication Date…
-
ASTM-E427 2000
E427-95(2000) Standard Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) Published…
-
ASTM-E2426 2005
E2426-05 Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with…
-
ASTM-E2425 2005
E2425-05 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers Published By Publication…
-
ASTM-E2527 2006
E2527-06 Standard Test Method for Rating Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems…
-
ASTM-E242 2005
E242-01(2005)e1 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed Published…
-
ASTM-E2227 2002
E2227-02 Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography…
-
ASTM-E2467 2005
E2467-05 Standard Practice for Developing Axle Count Adjustment Factors Published By Publication Date Number of…
-
ASTM-E2327 2015
E2327-15e1 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis Published By Publication Date…
-
ASTM-E2437 2005
E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals,…
-
ASTM-D2427 2015
D2427-06(2015) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas…
-
ASTM-E2422 2005
E2422-05 Standard Digital Reference Images for Inspection of Aluminum Castings Published By Publication Date Number…
-
ASTM-F2427 2004
F2427-04 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-E2527 2015
E2527-15 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under…
-
ASTM-E2457 2007(Redline)
E2457-07 Standard Terminology for Healthcare Informatics (Redline) Published By Publication Date Number of Pages ASTM…
-
ASTM-E2227 2008
E2227-02(2008) Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography…
-
ASTM-E2247 2002
E2247-02 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland…
-
ASTM-E2457 2007
E2457-07 Standard Terminology for Healthcare Informatics Published By Publication Date Number of Pages ASTM 2007…
-
ASTM-E247 2005
E247-01(2005) Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related…
-
ASTM-F2427 2008
F2427-05a(2008) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-E2407 2004
E2407-04 Standard Test Method for Effectiveness of Defoaming Agents Published By Publication Date Number of…
-
ASTM-E2247 2008
E2247-08 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland…
-
ASTM-E2407 2009
E2407-04(2009) Standard Test Method for Effectiveness of Defoaming Agents Published By Publication Date Number of…
-
ASTM-E2420 2005
E2420-05 Standard Guide for Post-Deactivation Surveillance and Maintenance of Radiologically Contaminated Facilities Published By Publication…
-
ASTM-E2027 2009(Redline)
E2027-09 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and…
-
ASTM-E2027 2005
E2027-05 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and…
-
ASTM-E2327 2015
E2327-15 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis Published By Publication Date…
-
ASTM-E2428 2015(Redline)
E2428-15a Standard Practice for Calibration and Verification of Torque Transducers (Redline) Published By Publication Date…
-
ASTM-E2527 2009(Redline)
E2527-09 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under…
-
ASTM-F2427 2005
F2427-05 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft…
-
ASTM-E242 2015(Redline)
E242-15 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed (Redline)…
-
ASTM-D2427 2006
D2427-06 Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas…
-
ASTM-E2428 2015
E2428-15a Standard Practice for Calibration and Verification of Torque Transducers Published By Publication Date Number…
