🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
BS EN 1130:2019:2021 Edition

BS EN 1130:2019:2021 Edition

$189.07

Children’s furniture. Cribs. Safety requirements and test methods

Published By Publication Date Number of Pages
BSI 2021 48
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This document specifies safety requirements and test methods for cribs (including cradles, suspended cribs and bedside sleepers) for domestic and non-domestic use.

The requirements apply to cribs with a maximum internal length of crib base of 900 mm which are intended to provide sleeping accommodation for infants, until they are able to sit unaided or pull or push themselves up on their hands and knees.

This document does not apply to electrical safety.

It does not apply to cribs used for medical purposes or used in hospitals.

Products that can be converted into other items may be covered by other relevant European Standards.

Annex A (informative) includes a rationale.

Annex B (informative) includes an A-deviation.

PDF Catalog

PDF Pages PDF Title
2 undefined
8 1 Scope
2 Normative references
3 Terms and definitions
9 4 General test conditions
4.1 Preliminary preparation
4.2 Application of Forces
10 4.3 Tolerances
4.4 Definition of the protected volume
5 Test equipment
5.1 General
5.2 Test mass
5.3 Entrapment test probes
5.3.1 Finger probes with hemispherical end
11 5.3.2 Finger probe for mesh
5.3.3 Other probes
5.3.4 Small head probe
12 5.3.5 Large head probe
5.3.6 Shape assessment probe
13 5.4 Side impactor
14 5.5 Stops
5.6 Small parts cylinder
15 5.7 Test platform
5.7.1 Mattress support
5.7.2 Test mattress
5.8 Test bar
5.9 Test plate
16 5.10 Template for V-shaped openings
17 5.11 Feeler gauge
5.12 Aluminium oxide abrasive paper
6 Chemical hazards (see A.2)
6.1 Migration of certain elements
18 6.2 Formaldehyde
7 Flammability hazards (see A.3)
8 Mechanical hazards
8.1 Crib base inclination
8.2 Entrapment hazards from gaps and openings (see A.4)
8.2.1 Finger entrapment hazards
8.2.1.1 Requirements
8.2.1.2 Test method
19 8.2.2 Other entrapment hazards
8.2.3 Entrapment hazards outside the crib
8.2.4 Test method for holes, gaps and openings
8.2.4.1 On the inside of the crib
20 8.2.4.2 On the outside of the crib
22 8.3 Hazards from moving parts
8.3.1 Shearing and crushing hazards
8.3.1.1 General requirements
8.3.1.2 Shearing hazards
23 8.3.1.3 Crushing hazards
8.3.2 Hazards due to body weight
8.3.3 Hazards due to unintentional folding of the crib
8.3.3.1 Requirements
8.3.3.2 Test method
8.4 Hazards due to the movements of the product (see A.5)
8.4.1 Hazards due to the movement of cradles and suspended cribs
8.4.1.1 Requirements
8.4.1.2 Test method for efficiency of the stops
24 8.4.1.3 Test method to measure the angle
8.4.2 Castors and wheels
8.4.2.1 Requirements
8.4.2.2 Test method
25 8.4.3 Locking system for foldable or adjustable legs and feet
8.4.3.1 Requirements
8.4.3.2 Test method
8.5 Falling hazards
8.5.1 Height of sides and ends
8.5.1.1 Requirements
8.5.1.2 Test method
8.5.2 Hazards due to inadvertent release of adjustable sides
8.5.2.1 Requirements
26 8.5.2.2 Test method
8.5.3 Locking system for adjustment in height or angle of the base
8.5.3.1 Requirements
8.5.3.2 Test method
8.5.4 Stability (see A.6)
8.5.4.1 Requirements
8.5.4.2 Test method
27 8.5.5 Structural integrity of suspended cribs
8.5.5.1 Requirement
8.5.5.2 Test method
28 8.6 Entanglement hazards (see A.7)
8.6.1 Requirements
8.6.2 Test method
29 8.7 Choking and ingestion hazards (see A.8)
8.7.1 Requirements
8.7.2 Test methods
8.7.2.1 Assessment of child’s ability to grip components
30 8.7.2.2 Torque test
8.7.2.3 Tensile test
8.8 Suffocation hazards
8.8.1 Hazards due to the deflection of the base
8.8.1.1 Requirements
8.8.1.2 Test method
31 8.8.2 External suffocation hazards (see A.9)
8.8.3 Plastic packaging
8.9 Hazards from sharp points and edges
8.9.1 General requirement
8.9.2 Requirement on attachment devices for suspended cribs (see A.10)
8.10 Hazards due to bedside sleeping (see A.11)
8.10.1 Hazards due to the drop side (see A.12)
8.10.2 Hazards from bedside sleepers disengagement (see A.13)
8.10.2.1 Requirement
8.10.2.2 Test method for continuous product disengagement
32 8.10.2.3 Test method for sudden product disengagement
8.10.3 Bedside sleeper attachment system
8.10.3.1 Requirements
33 8.10.3.2 Test methods
8.11 Structural integrity
8.11.1 Connecting screws
8.11.2 Static strength
8.11.2.1 Requirements
8.11.2.2 Test method
34 8.11.3 Strength of sides, structural members of the sides, ends and corners
8.11.3.1 Requirements
8.11.3.2 Bending test
8.11.3.3 Impact tests
35 8.11.4 Vertical static load
8.11.4.1 Requirement
36 8.11.4.2 Test method
9 Mattresses
10 Product information (see A.14)
10.1 General
10.2 Marking
37 10.3 Purchase information
38 10.4 Instructions for use
10.4.1 General
10.4.2 Warnings
10.4.3 Information for all cribs
39 10.4.4 Information for suspended cribs
40 10.4.5 Information for bedside sleepers
41 Annex A (informative)Rationale
A.1 General
A.2 Rationale for Chemical Requirements (Clause 6)
A.3 Rationale for requirements on ignitability and flash effect (Clause 7)
42 A.4 Requirements for entrapment hazards (8.2)
A.5 Requirements for hazards due to the movement of cradles and suspended cribs (8.4.1)
A.6 Requirements for stability (8.5.4)
A.7 Requirements for entanglement hazards (8.6)
43 A.8 Requirements for choking hazards and ingestion hazards (8.7)
A.9 Requirements for external suffocation hazards (8.8.2)
A.10 Requirements on attachment devices of suspended cribs (8.9.2)
A.11 Requirements for bed side sleepers (8.10)
44 A.12 Requirements for drop sides (8.10.1)
A.13 Requirements for hazards due to bedside sleepers disengagement (8.10.3)
A.14 Product information (Clause 10)
45 Annex B (informative)A–deviations

Related products

BS EN 1130:2019
$189.07