BS EN 60064:1995+A5:2009:2010 Edition
$215.11
Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
| Published By | Publication Date | Number of Pages |
| BSI | 2010 | 98 |
For lamps which comply with BS EN 60432-1:1995.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | BRITISH STANDARD |
| 2 | Committees responsible for this British Standard |
| 4 | Foreword Foreword to amendment A2 Endorsement notice Common modifications Contents |
| 8 | Introduction |
| 9 | Section 1 General 1.1 Scope 1.2 Normative references |
| 10 | 1.3 General format 1.4 Bulb shape 1.5 Definitions 1.5.1 type 1.5.2 group 1.5.3 white finish 1.5.4 manufacturer 1.5.5 production 1.5.6 total production 1.5.7 whole production 1.5.8 batch |
| 11 | 1.5.9 light centre length 1.5.10 inspection test quantity (ITQ) 1.5.11 rating test quantity (RTQ) 1.5.12 life test quantity (LTQ) 1.5.13 initial readings 1.5.14 rated voltage 1.5.15 test voltage 1.5.16 rated wattage 1.5.17 rated luminous flux (unit: lumen [lm]) 1.5.18 lumen maintenance 1.5.19 9life |
| 12 | 1.5.20 rated life 1.5.21 normal life test 1.5.22 accelerated life test 1.5.23 truncated life test |
| 13 | Section 2 Lamp characteristics and specifications 2.1 Lamp characteristics and specifications 2.1.1 Lamp characteristics and specific performance limits are listed on the individual lamp data sheet… 2.1.2 Each lamp data sheet defines a particular lamp “group” by listing the characteristics and limitin… 2.1.3 The sequence of the data sheets in Section 8 is by wattage within the following subdivisions. 2.1.4 Numbering system for lamp data sheets |
| 15 | Section 3 General, dimensional, electrical, photometric, and life requirements 3.1 General 3.1.1 The lamps on which compliance with this standard is claimed shall comply with the requirements of… 3.1.2 Lamps shall be so designed that their performance is reliable in normal and accepted use. In gene… 3.1.3 Lamps shall be tested under the procedures of 3.2 Marking 3.3 Lamp dimensions 3.3.1 Lamps shall comply with the dimensional requirements specified on the appropriate lamp data sheet. 3.3.2 Lamps with E27 caps shall comply with the gauge for testing contact-making, sheet�7006-50, of IEC… 3.4 Characteristics and tolerances of initial readings 3.4.1 Wattage 3.4.2 Luminous flux initial 3.5 Lumen maintenance 3.6 Life test requirements 3.6.1 The truncated average life of a normal life test or the equivalent truncated average life of an a… 3.6.2 Individual lamps shall have a life of not less than�70�% of rated life. |
| 17 | Section 4 Conditions of compliance 4.1 Whole production of a manufacturer 4.1.1 Pre-compliance testing for certification purposes 4.1.2 Compliance of manufacturer’s test data |
| 18 | 4.1.3 Compliance to comparability test 4.2 Compliance of individual batches 4.2.1 Dimensions 4.2.2 Initial readings 4.2.3 Life and lumen maintenance 4.2.4 Summary of compliance conditions for individual batches |
| 19 | Section 5 Sampling 5.1 Principles of sampling 5.2 Sampling for whole production testing 5.2.1 Pre-compliance testing for certification purposes 5.2.2 Manufacturer’s test data |
| 20 | 5.2.3 Sampling for comparability test 5.3 Sampling for batch testing 5.3.1 There shall be selected a random sample for an ITQ consisting of 50�lamps. 5.3.2 There shall be selected at random an RTQ comprising�100�lamps. The ITQ can be used as part of the… 5.3.3 From lamps which have passed the rating test, there shall be selected at random an LTQ of�50�lamps. |
| 21 | Section 6 Principles of dimensioning 6.1 Principles of dimensioning incandescent lamps with bulb shape A or PS, and cap B22d 6.1.1 All dimensions specified on the lamp data sheets of Section 8 are in millimetres (mm). 6.1.3 In the bulb designations on the lamp data sheets, the numerals shown indicate the nominal bulb di… Figure 1 Lamp with B22d cap 6.2 Principles of dimensioning incandescent lamps with bulb shape A or PS, and Edison screw cap 6.2.1 All dimensions specified on the lamp data sheets of Section�8 are in millimeters (mm). 6.2.3 In the bulb designations on the lamp data sheets, the numerals shown indicate the nominal bulb di… |
| 22 | Figure 2 Lamp with Edison screw cap |
| 23 | Section 7 Annexes |
| 24 | Annex B (normative) Life calculation and limits B.1 Truncated average life B.1.1 The truncated average life or equivalent truncated average life is obtained by the summation of t… |
| 25 | B.1.2 The minimum limit of truncated average life is given in the following table. Annex C (normative) Recommended pre-compliance tests for certification purposes (normative) Recommended pre-compliance tests for certification purposes C.1 Scope C.2 Sampling C.2.1 Sampling shall be subject to an agreement between the manufacturer and the testing authority and … C.2.2 The type with the larger production percentage shall be tested. C.2.3 For this type the lamps for testing shall be selected so as to be distributed as evenly as possib… C.2.4 Lamps shall be selected at the same time, one lot for measurement by the manufacturer and the oth… C.2.5 For this selected type a quantity of�60�lamps shall be taken for, respectively, the ITQ, RTQ and … C.3 Conditions of compliance C.3.1 Dimensions C.3.2 Initial readings C.3.3 Life and lumen maintenance |
| 26 | C.3.4 Summary of conditions for pre-compliance selected type C.3.5 Pre-compliance comparability test Table C.2 Allowable number |
| 27 | Annex D (normative) Statistical compliance tables Table D.1 Allowable number |
| 28 | Table D.2 Dimensional requirements |
| 29 | Table D.3 Initial readings |
| 30 | Table D.4 Life test Annex E (normative) Statistical concepts and basis of this standard |
| 31 | Annex F (normative) Test rack circuit characteristics |
| 95 | Annex ZA (normative) Normative references to international publications with their corresponding European … |
| 96 | National annex NA (informative) Original IEC text amended by CENELEC common modifications 1.1 Scope 2.1.3 The table has been modified. It was as follows. 3.3 Lamp dimensions 3.3.3 has been deleted. It read as follows. 8.1 Grouping of lamp data sheets |
