BS EN 61280-2-9:2002:2003 Edition
$102.76
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems – Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
Published By | Publication Date | Number of Pages |
BSI | 2003 | 20 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
Provides a parameter definition and test method for obtaining optical signal-to-noise ratio (OSNR) using apparatus that measure the optical spectrum at a multichannel interface. The measured noise does not include source relative intensity noise (RIN) or receiver noise. Three implementations for an OSA are discussed: a diffraction-grating-based OSA, a Michelson interferometer-based OSA, and a Fabry-Perot-based OSA. Characteristics of the OSA that affect OSNR measurement accuracy are provided.
Status | Withdrawn |
---|---|
Title | Fibre optic communication subsystem basic test procedures. Test procedures for digital systems – Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems |
Publisher | BSI |
Committee | GEL/86/3 |
Pages | 20 |
Publication Date | 2003-02-05 |
Withdrawn Date | 2009-05-31 |
Replaced By | BS EN 61280-2-9:2009 |
ISBN | 0 580 41182 6 |
Standard Number | BS EN 61280-2-9:2002 |
Identical National Standard Of | IEC 61280-2-9:2002, EN 61280-2-9:2002 |
Descriptors | Multiplexing, Optical communication systems, Performance testing, Fibre optic cables, Noise (spurious signals), Optoelectronic devices, Signal-to-noise ratio, Wavelengths, Fibre optic connectors, Spectrum analyzers, Digital signals, Optical fibres, Fibre optics |
ICS Codes | 33.180.20 - Fibre optic interconnecting devices |
Related products
-
BS EN 61240:2012
Piezoelectric devices. Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection.…
-
BS EN 61280-4-4:2006
Fibre optic communication subsystem basic test procedures – Cable plants and links – Polarization mode…
-
BS EN 61290-3:2008:2009 Edition
Optical amplifiers. Test methods – Noise figure parameters Published By Publication Date Number of Pages…
-
BS EN 61290-3-1:2003:2004 Edition
Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters – Optical spectrum analyzer…
-
BS EN 61280-4-2:2000
Fibre optic communication subsystem basic test procedures. Fibre optic cable plant – Single-mode fibre optic…
-
BS EN 61280-2-2:2005
Fibre optic communication subsystem test procedures – Digital systems – Optical eye pattern, waveform and…
-
BS EN 61290-1-2:2005:2007 Edition
Optical amplifiers. Test methods – Power and gain parameters – Electrical spectrum analyzer method Published…
-
BS EN 61290-1-1:2006:2007 Edition
Optical amplifiers. Test methods – Power and gain parameters – Optical spectrum analyzer method Published…
-
BS EN 62040-1-1:2003:2004 Edition
Uninterruptible power systems (UPS) – General and safety requirements for UPS used in operator access…
-
BS EN 61260:1996:2002 Edition
Electroacoustics. Octave-band and fractional-octave-band filters Published By Publication Date Number of Pages BSI 2002 34
-
BS EN 61287-1:2006:2007 Edition
Railway applications. Power convertors installed on board rolling stock – Characteristics and test methods Published…
-
BS EN 60439-2:2000 2006
Low voltage switchgear and controlgear assemblies – Particular requirements for busbar trunking systems (busways) Published…
-
BS EN 61280-2-3:2009:2010 Edition
Fibre optic communication subsystem test procedures – Digital systems. Jitter and wander measurements Published By…
-
BS EN 61286:2002
Information technology. Coded graphic character set for use in the preparation of documents used in…
-
BS EN 61280-2-3:2009:2010 Edition
Fibre optic communication subsystem test procedures – Digital systems. Jitter and wander measurements Published By…
-
BS EN 61290-10-1:2003
Optical amplifiers. Test methods – Multichannel parameters. Pulse method using an optical switch and optical…
-
BS EN 61290-11-1:2008
Optical amplifiers. Test methods – Polarization mode dispersion parameter. Jones matrix eigenanalysis (JME) Published By…
-
BS EN 61290-10-2:2008:2009 Edition
Optical amplifiers. Test methods – Multichannel parameters. Pulse method using a gated optical spectrum analyzer…
-
BS EN IEC 61280-4-1:2019+A1:2022
Fibre-optic communication subsystem test procedures – Installed cabling plant. Multimode attenuation measurement Published By Publication…
-
BS EN 61230:1996:2002 Edition
Live working. Portable equipment for earthing or earthing and short-circuiting Published By Publication Date Number…
-
BS EN 61280-1-4:2010
Fibre optic communication subsystem test procedures – General communication subsystems. Light source encircled flux measurement…
-
BS EN 61280-4-1:2004
Fibre-optic communication subsystem test procedures – Cable plant and links. Multimode fibre optic cable plant…
-
BS EN 61280-2-9:2009
Fibre optic communication subsystem test procedures – Digital systems. Optical signal-to-noise ratio measurement for dense…
-
BS EN 61290-11-1:2003
Optical fibre amplifiers. Basic specification. Polarization mode dispersion – Jones matrix eigenanalysis method (JME) Published…
-
BS EN 61290-3-2:2008:2009 Edition
Optical amplifiers. Test methods – Noise figure parameters. Electrical spectrum analyzer method Published By Publication…
-
BS EN 61280-2-8:2003
Fibre optic communication subsystem basic test procedures. Test procedures for digital systems – Determination of…
-
BS EN IEC 61280-4-1:2019
Fibre-optic communication subsystem test procedures – Installed cabling plant. Multimode attenuation measurement Published By Publication…
-
BS EN IEC 61280-4-5:2020
Fibre-optic communication subsystem test procedures – Installed cabling plant. Attenuation measurement of MPO terminated fibre…
-
BS EN 61280-1-4:2003
Fibre optic communication subsystem basic test procedures. Test procedures for general communication subsystems – Collection…
-
BS EN 61280-2-11:2006
Fibre optic communication subsystem test procedures – Digital systems – Averaged Q-factor determination using amplitude…
-
BS EN 61280-2-2:2008
Fibre optic communication subsystem test procedures – Digital systems. Optical eye pattern, waveform and extinction…
-
BS EN IEC 61280-4-1:2019+A1:2022:2023 Edition
Fibre-optic communication subsystem test procedures – Installed cabling plant. Multimode attenuation measurement Published By Publication…
-
BS EN 61285:2004:2005 Edition
Industrial-process control. Safety of analyser houses Published By Publication Date Number of Pages BSI 2005…
-
BS EN 61280-4-1:2009:2010 Edition
Fibre optic communication subsystem test procedures – Installed cable plant. Multimode attenuation measurement Published By…
-
BS EN 61280-2-2:2012:2015 Edition
Fibre optic communication subsystem test procedures – Digital systems. Optical eye pattern, waveform and extinction…
-
BS EN 61290-3:2000
Optical fibre amplifiers. Basic specification – Test methods for noise figure parameters Published By Publication…
-
BS EN 61290-3-2:2003
Optical fibre amplifiers. Basic specification. Test methods for noise figure parameters – Electrical spectrum analyzer…
-
BS EN 61290-10-1:2009
Optical amplifiers. Test methods – Multichannel parameters. Pulse method using an optical switch and optical…
-
BS EN 61158-5-17:2008:2009 Edition
Industrial communication networks. Fieldbus specifications – Application layer service definition. Type 17 elements Published By…
-
BS EN 61290-10-2:2003
Optical amplifiers. Test methods – Multichannel parameters. Pulse method using a gated optical spectrum analyzer…