Shopping Cart

No products in the cart.

BS EN 71-1:2011+A3:2014

$215.11

Safety of toys – Mechanical and physical properties

Published By Publication Date Number of Pages
BSI 2014 152
Guaranteed Safe Checkout
Categories: ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This European Standard specifies requirements and methods of tests for mechanical and physical properties of toys.

This European Standard applies to toys for children, toys being any product or material designed or intended, whether or not exclusively, for use in play by children of less than 14 years. It refers to new toys taking into account the period of foreseeable and normal use, and that the toys are used as intended or in a foreseeable way, bearing in mind the behaviour of children.

It includes specific requirements for toys intended for children under 36 months, children under 18 months and for children who are too young to sit up unaided. According to Directive 2009/48/EC “intended for use by” means that a parent or supervisor shall reasonably be able to assume by virtue of the functions, dimensions and characteristics of a toy that it is intended for use by children of the stated age group. Therefore, for the purpose of this European Standard, e.g. soft-filled toys with simple features intended for holding and cuddling are considered as toys intended for children under 36 months.

NOTE Information relating to the age grading of toys and, in particular, which toys are intended for children under 36 months and which toys are not, can be found in CEN Report CR 14379, the Consumer Product Safety Commission (CPSC) Age determination guidelines, CEN/CENELEC Guide 11 and the European Commission’s Guidance Documents.

This European Standard also specifies requirements for packaging, marking and labelling.

This European Standard does not cover musical instruments, sports equipment or similar items but does include their toy counterparts.

This European Standard does not apply to the following toys:

  • playground equipment intended for public use;

  • automatic playing machines, whether coin operated or not, intended for public use;

  • toy vehicles equipped with combustion engines (see A.2);

  • toy steam engines;

  • slings and catapults.

Items that are propelled into free flight by a child releasing an elastic band (e.g. aeroplanes and rockets) are considered as catapults (see 5th indent above).

This European Standard does not cover electrical safety aspects of toys. These are covered by EN 62115.

Furthermore, it does not cover the following items which, for the purpose of this European Standard, are not considered as toys:

  • decorative objects for festivities and celebrations;

  • products for collectors, provided that the product or its packaging bears a visible and legible indication that it is intended for collectors of 14 years of age and above. Examples of this category are:

  • detailed and faithful scale models (see A.2);

  • kits for the assembly of detailed scale models;

  • folk dolls and decorative dolls and other similar articles;

  • historical replicas of toys;

  • reproductions of real fire arms;

  • sports equipment including roller skates, inline skates, and skateboards intended for children with a body mass of more than 20 kg;

  • bicycles with a maximum saddle height of more than 435 mm, measured as the vertical distance from the ground to the top of the seat surface, with the seat in a horizontal position and with the seat pillar set to the minimum insertion mark;

  • scooters and other means of transport designed for sport or which are intended to be used for travel on public roads or public pathways;

  • electrically driven vehicles which are intended to be used for travel on public roads, public pathways, or the pavement thereof;

  • aquatic equipment intended to be used in deep water, and swimming learning devices for children, such as swim seats and swimming aids;

  • puzzles with more than 500 pieces;

  • guns and pistols using compressed gas, with the exception of water guns and water pistols;

  • bows for archery over 120 cm long;

  • fireworks, including percussion caps which are not specifically designed for toys;

  • products and games using sharp-pointed missiles, such as sets of darts with metallic points;

  • functional educational products, such as electric ovens, irons or other functional products, as defined in 2009/48/EC, operated at a nominal voltage exceeding 24 V which are sold exclusively for teaching purposes under adult supervision;

  • products intended for use for educational purposes in schools and other pedagogical contexts under the surveillance of an adult instructor, such as science equipment;

  • electronic equipment, such as personal computers and game consoles, used to access interactive software and their associated peripherals, unless the electronic equipment or the associated peripherals are specifically designed for and targeted at children and have a play value on their own, such as specially designed personal computers, key boards, joy sticks or steering wheels;

  • interactive software, intended for leisure and entertainment, such as computer games, and their storage media, such as CDs;

  • babies’ soothers;

  • child-appealing luminaires;

  • electrical transformers for toys;

  • fashion accessories for children which are not for use in play (see A.2);

  • personal protective equipment, including flotation aids such as arm bands and swim seats (see A.23); and swimming goggles, sunglasses and other eye protectors as well as bicycle and skateboard helmets (see A.19).

PDF Catalog

PDF Pages PDF Title
4 Contents Page
13 1 Scope (see A.2)
15 2 Normative references
16 3 Terms and definitions
22 3.55 &
24 4 General requirements
4.1 Material cleanliness (see A.3)
25 4.2 Assembly (see A.4)
4.3 Flexible plastic sheeting (see A.5 and A.16)
4.4 Toy bags
4.5 Glass (see 5.7 and A.6)
4.6 Expanding materials (see A.7)
26 4.7 Edges (see A.8)
4.8 Points and metallic wires (see A.9)
27 4.9 Protruding parts (see A.10)
4.10 Parts moving against each other
4.10.1 Folding and sliding mechanisms (see A.11)
29 4.10.2 Driving mechanisms (see A.12)
4.10.3 Hinges (see A.13)
4.10.4 Springs (see A.14)
30 4.11 Mouth-actuated toys and other toys intended to be put in the mouth (see A.15)
4.12 Balloons (see 4.3 and A.16)
4.13 Cords of toy kites and other flying toys (see A.17)
4.14 Enclosures
4.14.1 Toys which a child can enter (see A.18)
31 4.14.2 Masks and helmets (see A.19)
32 4.15 Toys intended to bear the mass of a child (see A.20)
4.15.1 Toys propelled by a child or by other means
4.15.1.1 General
4.15.1.2 Warnings and instructions for use
33 4.15.1.3 Strength
4.15.1.4 Stability
34 4.15.1.5 Braking
4.15.1.6 Transmission and wheel arrangement
35 4.15.1.7 Adjustable seat pillar and handlebar stem minimum insertion marks
36 4.15.1.8 Electrically-driven ride-on toys
4.15.2 Toy bicycles (see A.20)
4.15.2.1 General
4.15.2.2 Warnings and instructions for use
37 4.15.2.3 Braking requirements
4.15.3 Rocking horses and similar toys (see A.21)
38 4.15.4 Toys not propelled by a child
4.15.5 Toy scooters (see A.49)
4.15.5.1 General
39 4.15.5.2 Warnings and instructions for use
4.15.5.3 Strength
4.15.5.4 Adjustable and folding steering tubes
4.15.5.5 Braking
40 4.15.5.6 Wheel size
4.15.5.7 Protruding parts
4.16 Heavy immobile toys
4.17 Projectiles (see A.22)
4.17.1 General
41 4.17.2 Projectile toys without stored energy
4.17.3 Projectile toys with stored energy
4.17.4 Bows and arrows
4.18 Aquatic toys and inflatable toys (see A.23)
42 4.19 Percussion caps specifically designed for use in toys and toys using percussion caps (see A.24)
4.20 Acoustics (see A.25)
4.20.1 Exposure categories for time-averaged sound pressure levels
43 4.20.2 Emission sound pressure level limits
4.20.2.1 General
4.20.2.2 Close-to-the-ear toys
4.20.2.3 Table-top or floor toys
4.20.2.4 Hand-held toys
44 4.20.2.5 Toys using headphones or earphones
4.20.2.6 Rattles
4.20.2.7 Squeeze toys
4.20.2.8 Pull-along or push toys
4.20.2.9 Percussion toys
4.20.2.10 Wind toys
4.20.2.11 Cap-firing toys
45 4.20.2.12 Voice toys
47 4.21 Toys containing a non-electrical heat source
48 4.22 Small balls (see 5.10 and A.48)
4.23 Magnets (see A.51)
4.23.1 General
4.23.2 Toys other than magnetic/electrical experimental sets intended for children over 8 years
49 4.23.3 Magnetic/electrical experimental sets intended for children over 8 years
4.24 Yo-yo balls (see A.52)
4.25 Toys attached to food (see A.55)
50 5 Toys intended for children under 36 months
5.1 General requirements (see A.26)
51 5.2 Soft-filled toys and soft-filled parts of a toy (see A.27)
5.3 Plastic sheeting (see A.28)
5.4 Cords, chains and electrical cables in toys (see A.29)
53 5.5 Liquid-filled toys (see A.30)
5.6 Speed limitation of electrically-driven ride-on toys
5.7 Glass and porcelain (see 4.5 and A.6)
5.8 Shape and size of certain toys (see A.31)
54 5.9 Toys comprising monofilament fibres (see A.32)
5.10 Small balls (see also 4.22 and A.48)
5.11 Play figures
55 5.12 Hemispheric-shaped toys (see A.50)
57 5.13 Suction cups (see A.54)
5.14 Straps intended to be worn fully or partially around the neck (see A.53)
6 Packaging (see A.56)
58 7 Warnings, markings and instructions for use (see A.33)
59 7.1 General
7.2 Toys not intended for children under 36 months (see 4.22 and A.34)
61 7.3 Latex balloons (see 4.12 and A.16)
7.4 Aquatic toys (see 4.18 and A.23)
7.5 Functional toys (see A.35)
7.6 Hazardous sharp functional edges and points (see 4.7 and 4.8)
7.7 Projectiles (see 4.17.3 c) and 4.17.4 c))
7.7.1 Toys with projectiles which are able to discharge an object other than that provided with the toy
62 7.7.2 Toys capable of discharging a projectile with a kinetic energy greater than 0,08 J
7.8 Imitation protective masks and helmets (see 4.14.2 and A.19)
7.9 Toy kites (see 4.13)
7.10 Roller skates, inline skates, skateboards and certain other ride-on toys (see 4.15.1.2 and A.20)
7.10.1 Roller skates, inline skates and skateboards
7.10.2 Ride-on toys without a braking device
7.10.3 Electrically-driven ride-on toys
63 7.10.4 Instructions for use
7.11 Toys intended to be attached to or strung across a cradle, cot, or perambulator (see 5.4 f))
7.12 Liquid-filled teethers (see 5.5)
7.13 Percussion caps specifically designed for use in toys (see 4.19)
7.14 Acoustics (see 4.19 and 4.20)
64 7.15 Toy bicycles (see 4.15.2.2)
7.16 Toys intended to bear the mass of a child (see 4.15.1.2, 4.15.2.2, 4.15.3 and 4.15.4)
7.17 Toys comprising monofilament fibres (see 5.9)
7.18 Toy scooters (see 4.15.5.2)
65 7.19 Rocking horses and similar toys (see 4.15.3 and A.21)
7.20 Magnetic/electrical experimental sets (see 4.23.3 and A.51)
7.21 Toys with electrical cables exceeding 300 mm in length (see 5.4 i))
7.22 Toys with cords or chains intended for children of 18 months and over but under 36 months (see 5.4 b), 5.4 c) and 5.4 g))
8 Test methods
8.1 General requirements for testing
66 8.2 Small parts cylinder (see 4.6, 4.11, 4.18, 4.23.2, 4.23.3, 4.25, 5.1, 5.2 and A.36)
8.3 Torque test (see 4.6, 4.11, 4.14.2, 4.17, 4.18, 4.22, 4.23.2, 4.25, 5.1, 5.10, 5.12, 5.13 and Clause 6)
67 8.4 Tension test (see A.37)
8.4.1 Apparatus
8.4.1.1 Tensile testing machine or dead-weight arrangement with means of applying forces up to at least 90 N with an accuracy of 2 N
8.4.1.2 Clamps and straps
8.4.1.3 Feeler gauge with a thickness of (0,4 ± 0,02) mm and an insertion edge radius of approximately 3 mm (see Figure 19)
8.4.2 Procedure
8.4.2.1 General (see 4.6, 4.11, 4.14.2, 4.17, 4.18, 4.22, 4.23, 4.25, 5.1, 5.3, 5.10, 5.12, 5.13 and Clause 6)
68 8.4.2.2 Seams and materials (see 4.23.2 and 5.2)
69 8.4.2.3 Protective components (see 4.9 and 4.17.1)
8.5 Drop test (see 4.5, 4.6, 4.10.2, 4.14.2, 4.22, 4.23.2, 4.25, 5.1, 5.10, 5.12 and 5.13)
8.6 Tip over test (see 4.10.2, 4.22, 4.23.2, 5.1, 5.10, 5.12 and 5.13)
70 8.7 Impact test (see 4.5, 4.6, 4.10.2, 4.14.2, 4.22, 4.23.2, 4.25, 5.1, 5.10, 5.12, 5.13 and A.38)
8.8 Compression test (see 4.6, 4.14.2, 4.22, 4.23.2, 4.25, 5.1, 5.10, 5.12, 5.13 and A.39)
8.9 Soaking test (see 4.11, 4.23.2, 5.1, 5.10 and 5.12)
71 8.10 Accessibility of a part or component (see 4.5, 4.7, 4.8, 4.10.2, 4.10.4, 4.15.1.3, 4.21, 5.2 and 5.7)
8.10.1 Principle
8.10.2 Apparatus
8.10.3 Procedure
72 8.11 Sharpness of edges (see 4.5, 4.7, 4.9, 4.10.2, 4.14.2, 4.15.1.3 and 5.1)
8.11.1 Principle
73 8.11.2 Apparatus
8.11.2.1 General
8.11.2.2 Mandrel, made of steel
8.11.2.3 Device for rotating the mandrel and applying a force to it
8.11.2.4 Self-adhesive tape
74 8.11.3 Procedure
8.12 Sharpness of points (see 4.5, 4.8, 4.9, 4.10.2, 4.14.2, 4.15.1.3, 5.1 and A.40)
8.12.1 Principle
8.12.2 Apparatus
75 8.12.3 Procedure
76 8.13 Flexibility of metallic wires (see 4.8 and A.41)
8.13.1 General
8.13.2 Metallic wires and other metallic components intended to be bent
8.13.3 Metallic wires likely to be bent
77 8.14 Expanding materials (see 4.6)
8.15 Leakage of liquid-filled toys (see 5.5 and A.42)
8.16 Geometric shape of certain toys (see 5.8, 5.11 and A.43)
78 8.17 Durability of mouth-actuated toys (see 4.11 and A.44)
8.17.1 Mouth-actuated projectile toys
8.17.2 Other mouth-actuated toys
79 8.18 Folding or sliding mechanisms (see 4.10.1 and A.45)
8.18.1 Loads
8.18.2 Toy pushchairs and perambulators
80 8.18.3 Other collapsible toys (see 4.10.1 c))
8.19 Electric resistivity of cords (see 4.13)
8.20 Cords cross-sectional dimension (see 5.4 a))
81 8.21 Static strength (see 4.15.1.3, 4.15.1.5, 4.15.3, 4.15.4 and A.46)
82 8.22 Dynamic strength (see 4.15.1.3)
8.22.1 Principle
8.22.2 Loads
83 8.22.3 Procedure
8.22.3.1 General
84 8.22.3.2 Toys intended for use sitting down
85 8.22.3.3 Toys intended for use standing
8.22.3.4 Roller skates and toys without steering wheel or handles
8.23 Stability
8.23.1 Toys intended to bear the mass of a child (see 4.15.1.4, 4.15.3 and 4.15.4)
8.23.2 Heavy immobile toys (see 4.16)
8.24 Determination of kinetic energy (see A.47)
8.24.1 Kinetic energy of projectiles (see 4.17.3)
86 8.24.2 Kinetic energy of bows and arrows (see 4.17.4)
8.25 Plastic sheeting
8.25.1 Thickness (see 4.3, 5.3 and Clause 6)
8.25.1.1 Apparatus
8.25.1.2 Procedure
8.25.2 Adhesion (see 5.3)
8.25.2.1 Apparatus
8.25.2.2 Procedure
8.26 Brake performance
8.26.1 Brake performance for certain ride-on toys (see 4.15.1.5)
8.26.1.1 General
87 8.26.1.2 Motor brake performance – Ramp test
8.26.1.3 Motor brake performance – Horizontal test
8.26.2 Brake performance for toy bicycles (see 4.15.2.3)
8.26.3 Brake performance for toy scooters (see 4.15.5.5)
8.26.3.1 Toy scooters with handbrake
88 8.26.3.2 Toy scooters with foot brake
8.27 Strength of toy scooter steering tubes (see 4.15.5.3)
8.27.1 Resistance to downward forces
89 8.27.2 Resistance to upward forces
8.28 Determination of emission sound pressure levels (see 4.20)
8.28.1 General
8.28.1.1 Principle
90 8.28.1.2 Basic test procedure
8.28.1.3 Test conditions
91 8.28.1.4 Test environment
92 8.28.1.5 Microphone positions
8.28.1.6 Measurement uncertainty
93 8.28.2 Test procedures
8.28.2.1 Close-to-the-ear toys
94 8.28.2.2 Table-top or floor toys
95 8.28.2.3 Hand-held toys
96 8.28.2.4 Toys with earphones and headphones
8.28.2.5 Rattles
97 8.28.2.6 Squeeze toys
98 8.28.2.7 Pull-along or push toys
99 8.28.2.8 Percussion toys
100 8.28.2.9 Wind toys
8.28.2.10 Cap-firing toys
101 8.28.2.11 Voice toys
102 8.29 Determination of maximum design speed of electrically-driven ride-on toys (see 4.15.1.2, 4.15.1.5, 4.15.1.8 and 5.6)
103 8.30 Measurement of temperature rises (see 4.21)
8.31 Toy chest lids (see 4.14.1 c))
8.31.1 General
8.31.2 Lid support
8.31.3 Durability test for vertically opening hinged lids
8.32 Small balls and suction cups test (see 4.17, 4.22, 4.25, 5.10 and 5.13)
8.32.1 Small balls and suction cups (see Clause 6)
104 8.32.2 Small balls attached to a toy by a cord
105 8.33 Test for play figures (see 5.11)
8.34 Tension test for magnets (see 4.23.2 and A.51)
8.34.1 General
8.34.2 Toys that contain more than one magnet or magnetic component
106 8.34.3 Toys that contain one magnet only
8.34.3.1 Apparatus
8.34.3.2 Procedure
8.35 Magnetic flux index (see 4.23.2 and 4.23.3)
8.35.1 General
8.35.2 Apparatus
8.35.2.1 Direct current field Gauss meter with a resolution of 5 G, and capable of determining the field to an accuracy of 1,5 % or better.”
107 8.35.2.2 Calliper square or similar device capable of determining dimensions to an accuracy of 0,1 mm.
8.35.3 Procedure
8.35.3.1 Measurement of flux density
8.35.3.2 Measurement and calculation of the pole surface area
8.35.4 Calculation of magnetic flux index
108 8.36 Perimeter of cords and chains (see 5.4 c) and 5.4 d))
8.36.1 Test equipment
109 8.36.2 Test procedures
8.36.2.1 Cords and chains with a single fixing point or with fixing points less than 94 mm apart
8.36.2.2 Cords and chains fixed to the toy at points of 94 mm or more apart
112 8.37 Yo-yo balls measurements (see 4.24)
8.37.1 Measurement of initial length l0
113 8.37.2 Measurement of elastic constant k
114 8.38 Breakaway feature separation test (see 5.4 b), 5.4 c) and 5.14)
115 8.39 Self-retracting cords (see 5.4 e))
8.40 Length of cords, chains and electrical cables (see 5.4 b), 5.4 c), 5.4 g), 5.4 h) and 5.4 i))
116 Annex A (informative)Background and rationale for this European Standard
A.1 General
A.2 Scope (see Clause 1)
A.3 Material cleanliness (see 4.1)
117 A.4 Assembly (see 4.2)
A.5 Flexible plastic sheeting (see 4.3)
A.6 Glass (see 4.5 and 5.7)
A.7 Expanding materials (see 4.6)
A.8 Edges (see 4.7)
118 A.9 Points and metallic wires (see 4.8)
A.10 Protruding parts (see 4.9)
119 A.11 Folding and sliding mechanisms (see 4.10.1)
A.12 Driving mechanisms (see 4.10.2)
A.13 Hinges (see 4.10.3)
120 A.14 Springs (see 4.10.4)
A.15 Mouth-actuated toys and other toys intended to be put in the mouth (see 4.11)
A.16 Balloons (see 4.3, 4.12 and 7.3)
121 A.17 Cords of toy kites (see 4.13)
A.18 Toys which a child can enter (see 4.14.1)
A.19 Masks and helmets (see 4.14.2 and 7.8)
A.20 Toys intended to bear the mass of a child (see 4.15 and 7.10)
122 A.21 Rocking horses and similar toys (see 4.15.3)
123 A.22 Projectiles (see 4.17)
A.23 Aquatic toys and inflatable toys (see 4.18 and 7.4)
A.24 Percussion caps specifically designed for use in toys and toys using percussion caps (see 4.19)
124 A.25 Acoustics (see 4.20)
127 A.26 General requirements for toys intended for children under 36 months (see 5.1)
128 A.27 Soft-filled toys and soft-filled parts of a toy (see 5.2)
A.28 Adhesion of plastic sheeting (see 5.3)
A.29 Cords and chains in toys (see 5.4)
131 A.30 Liquid-filled toys (see 5.5 and A.42)
A.31 Shape and size of certain toys (see 5.8 and A.43)
A.32 Toys comprising monofilament fibres (see 5.9)
A.33 Warnings, markings and instructions for use (see 7.1)
133 A.34 Warning for toys not intended for children under 36 months (see 7.2)
A.35 Warnings in connection with functional toys (see 7.5)
A.36 Small parts cylinder (see 8.2)
A.37 Tension test (see 8.4)
A.38 Impact test (see 8.7)
A.39 Compression test (see 8.8)
A.40 Sharpness of points (see 8.12)
134 A.41 Flexibility of metallic wires (see 8.13)
A.42 Leakage of liquid-filled teethers (see 8.15 and A.30)
A.43 Geometric shape of certain toys (see 8.16 and A.31)
A.44 Durability of mouth-actuated toys (see 8.17)
A.45 Folding or sliding mechanisms (see 8.18)
A.46 Static strength (see 8.21)
A.47 Kinetic energy of projectiles, bows and arrows (see 8.24)
135 A.48 Small balls (see 4.22 and 5.10)
136 A.49 Toy scooters (see 4.15.5)
A.50 Hemispheric-shaped toys (see 5.12)
137 A.51 Magnets (see 4.23)
139 A.52 Yo-yo balls (see 4.24)
142 A.53 Straps intended to be worn fully or partially around the neck (see 5.14)
A.54 Suction cups (see 5.13)
A.55 Toys attached to food (see 4.25)
143 A.56 Packaging (see Clause 6)
145 Annex B (informative)Significant technical changes between this European Standard and the previous version
147 Annex ZA (informative)Clauses of this European Standard addressing essential requirements or other provisions of EU Directives
BS EN 71-1:2011+A3:2014
$215.11