BS ISO 16000-8:2007
$189.07
Indoor air – Determination of local mean ages of air in buildings for characterizing ventilation conditions
Published By | Publication Date | Number of Pages |
BSI | 2007 | 50 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 16000 describes the use of single tracer gas for determining the local mean age of air as an indicator of ventilation conditions in a building. The procedures include concentration decay and homogeneous constant emission.
The described methods are intended for air quality studies and can be used for
-
checking whether the building ventilation requirements are met,
-
estimating the adequacy of ventilation in buildings with indoor air quality problems, and
-
characterizing the strength and distribution of indoor emission sources.
In principle, the methods can be applied to all indoor spaces, regardless of the type of ventilation used and the state of mixing of air between zones. The prevailing ventilation conditions need not be disturbed by the measurement.
This part of ISO 16000 does not address the details of the analytical methods for tracer gases. The availability of such analysis services should be checked before planning actual field measurements.
Status | Confirmed |
---|---|
Pages | 50 |
Publication Date | 2007-07-31 |
ISBN | 978 0 580 54791 1 |
Standard Number | BS ISO 16000-8:2007 |
Title | Indoor air – Determination of local mean ages of air in buildings for characterizing ventilation conditions |
Identical National Standard Of | ISO 16000-8:2007 |
Descriptors | Quality, Tracer methods, Emission, Chemical analysis and testing, Buildings, Thermal environment systems, Determination of content, Construction materials, Gas analysis, Ventilation, Air changes, Air |
Publisher | BSI |
Committee | EH/2/5 |
ICS Codes | 13.040.20 - Ambient atmospheres |
Related products
-
BS EN ISO 16000-1:2006
Indoor air – General aspects of sampling strategy Published By Publication Date Number of Pages…
-
BS EN ISO 16000-11:2006
Indoor air – Determination of the emission of volatile organic compounds from building products and…
-
BS ISO 16004:2017
Aircraft ground equipment. Passenger boarding bridge or transfer vehicle. Interface requirements with aircraft doors Published…
-
BS ISO/IEC 18000-2:2009:2012 Edition
Information technology. Radio frequency identification for item management – Parameters for air interface communications below…
-
BS EN ISO 16000-9:2006:2008 Edition
Indoor air – Determination of the emission of volatile organic compounds from building products and…
-
BS EN 13999-3:2007+A1:2009
Adhesives. Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after…
-
BS ISO/IEC 18000-4:2004
Information technology. Radio-frequency identification for item management – Parameters for air interface communications at 2,45…
-
BS ISO/IEC 18000-7:2004
Information technology. Radio frequency identification for item management – Parameters for active air interface communications…
-
BS EN ISO 13000-2:2005:2006 Edition
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products – Preparation of test specimens and determination of properties Published…
-
BS EN ISO 16000-10:2006
Indoor air – Determination of the emission of volatile organic compounds from building products and…
-
BS EN ISO 16000-7:2007
Indoor air – Sampling strategy for determination of airborne asbestos fibre concentrations Published By Publication…
-
BS ISO 16000-17:2008:2010 Edition
Indoor air – Detection and enumeration of moulds. Culture-based method Published By Publication Date Number…
-
BS ISO/IEC 18000-6:2010
Information technology. Radio frequency identification for item management – Parameters for air interface communications at…
-
BS ISO/IEC 18000-1:2004
Information technology. Radio frequency identification for item management – Reference architecture and definition of parameters…
-
BS EN 61000-6-2:2001:2006 Edition
Electromagnetic compatibility (EMC) – Generic standards. Immunity for industrial environments Published By Publication Date Number…
-
BS ISO 16000-16:2008:2009 Edition
Indoor air – Detection and enumeration of moulds. Sampling by filtration Published By Publication Date…
-
BS EN ISO 16000-12:2008
Indoor air – Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs)…
-
BS EN ISO 16000-2:2006
Indoor air – Sampling strategy for formaldehyde Published By Publication Date Number of Pages BSI…
-
BS ISO 16004:2005:2006 Edition
Aircraft ground equipment. Passenger boarding bridge or transfer vehicle. Requirements for interface with aircraft doors…
-
BS ISO 16000-4:2004:2005 Edition
Indoor air – Determination of formaldehyde. Diffusive sampling method Published By Publication Date Number of…
-
BS EN 61000-3-3:1995+A2:2005:2009 Edition
Electromagnetic compatibility (EMC) – Limits. Limitation of voltage changes, voltage fluctuations and flicker in public…
-
BS 15000-1:2002
IT service management – Specification for service management Published By Publication Date Number of Pages…
-
BS EN ISO 8041:2005:2009 Edition
Human response to vibration. Measuring instrumentation Published By Publication Date Number of Pages BSI 2009…
-
BS ISO/IEC 18000-7:2008
Information technology. Radio frequency identification for item management – Parameters for active air interface communications…
-
BS EN ISO 16000-15:2008
Indoor air – Sampling strategy for nitrogen dioxide (NO2) Published By Publication Date Number of…
-
BS ISO 16000-33:2017
Indoor air – Determination of phthalates with gas chromatography/mass spectrometry (GC/MS) Published By Publication Date…
-
BS EN ISO 16000-5:2007
Indoor air – Sampling strategy for volatile organic compounds (VOCs) Published By Publication Date Number…
-
BS ISO/IEC 18000-2:2004
Information technology. Radio frequency idenficiation for item management – Parameters for air interface communications below…
-
BS EN 61000-4-3:2002:2005 Edition
Electromagnetic compatibility (EMC). – Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test Published…
-
BS ISO/IEC 18000-6:2004:2006 Edition
Information technology. Radio frequency identification for item management – Parameters for air interface communications at…
-
BS EN ISO 16090-1:2018
Machine tools safety. Machining centres, Milling machines, Transfer machines – Safety requirements Published By Publication…
-
BS EN 61000-6-1:2001:2006 Edition
Electromagnetic compatibility (EMC) – Generic standards. Immunity for residential, commercial and light-industrial environments Published By…
-
BS EN ISO 22829:2008
Resistance welding. Transformer-rectifier for welding guns with integrated transformers. Transformer- rectifier units operating at 1000…
-
BS ISO 16020:2005:2006 Edition
Steel for the reinforcement and prestressing of concrete. Vocabulary Published By Publication Date Number of…
-
BS ISO/IEC 18000-4:2008:2012 Edition
Information technology. Radio frequency identification for item management – Parameters for air interface communications at…
-
BS EN ISO 13000-1:2005
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products – Requirements and designation Published By Publication Date Number of…
-
BS ISO/IEC 18000-1:2008:2012 Edition
Information technology. Radio frequency identification for item management – Reference architecture and definition of parameters…
-
BS ISO 16000-3:2001
Indoor air – Determination of formaldehyde and other carbonyl compounds. Active sampling method Published By…
-
BS EN ISO 16001:2017:2018 Edition
Earth-moving machinery. Object detection systems and visibility aids. Performance requirements and tests Published By Publication…
-
BS EN ISO/IEC 17000:2004
Conformity assessment. Vocabulary and general principles Published By Publication Date Number of Pages BSI 2004…