ISO 11737-2:2009
$27.95
Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process
Published By | Publication Date | Number of Pages |
ISO | 2009-11 | 24 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ISO 11737-2:2009 specifies the general criteria for tests of sterility on medical devices that have been exposed to a treatment with the sterilizing agent reduced relative to that anticipated to be used in routine sterilization processing. These tests are intended to be performed when defining, validating or maintaining a sterilization process.
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 2009-11 |
Pages Count | 24 |
Language | English |
Edition | 2 |
File Size | 215.0 KB |
ICS Codes | 07.100.10 - Medical microbiology 11.080.01 - Sterilization and disinfection in general |
Related products
-
AS/NZS ISO 11137.3:2006 (R2017)
Sterilization of health care products – Radiation – Guidance on dosimetric aspects Published By Publication…
-
BS EN ISO 11737-1:2018+A1:2021
Sterilization of health care products. Microbiological methods – Determination of a population of microorganisms on…
-
CAN/CSA-ISO 11137-3:F17:2017 Edition
Stérilisation des produits de santé — Irradiation — Partie 3 : Directives relatives aux aspects…
-
BS EN ISO 11731-2:2008
Water quality. Detection and enumeration of Legionella – Direct membrane filtration method for waters with…
-
BSI 21/30419095 DC:2021 Edition
BS EN 15129-6. Anti-seismic devices – Part 6. Sliding isolators Published By Publication Date Number…
-
BS EN ISO 11737-2:2009:2010 Edition
Sterilization of medical devices. Microbiological methods – Tests of sterility performed in the definition, validation…
-
ISO 11237-2:2006
Rubber hoses and hose assemblies — Wire-braid-reinforced compact types for hydraulic applications — Specification —…
-
CAN/CSA-Z11137-1-07:2007 Edition
Sterilization of Health Care Products – Radiation – Part 1: Requirements for Development, Validation and…
-
BS ISO 13737:2004
Method of test for petroleum and its products. BS 2000-527. Petroleum products and lubricants. Determination…
-
ISO 3317:2009
Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat…
-
CAN/CSA-ISO 11137-3:17:2017 Edition
Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of…
-
CSA ISO 11737-2:21:2021 Edition
Sterilization of health care products — Microbiological methods — Part 2: Tests of sterility performed…
-
BS EN ISO 11737-1:2018+A1:2021
Sterilization of health care products. Microbiological methods – Determination of a population of microorganisms on…
-
BS EN ISO 1737:2000
Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method) Published…
-
BS EN ISO 11737-2:2000
Sterilization of medical devices. Microbiological methods – Tests of sterility performed in the validation of…
-
ISO 13641-1:2003
Water quality — Determination of inhibition of gas production of anaerobic bacteria — Part 1:…
-
BS EN ISO 12737:2005:2006 Edition
Metallic materials. Determination of plane-strain fracture toughness Published By Publication Date Number of Pages BSI…
-
BS EN ISO 11137-3:2006:2007 Edition
Sterilization of health care products. Radiation – Guidance on dosimetric aspects Published By Publication Date…
-
BSI PD ISO/TS 17137:2021
Cardiovascular implants and extracorporeal systems. Cardiovascular absorbable implants Published By Publication Date Number of Pages…
-
BS EN 552:1994:2001 Edition
Sterilization of medical devices. Validation and routine control of sterilization by irradiation Published By Publication…
-
BS ISO 11237-1:2005
Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification – Oil-based fluid…
-
AAMI 11737 2 2019
ANSI/AAMI/ISO 11737-2:2019 – Sterilization of medical devices-Microbiological methods-Part 2: Tests of sterility performed in the…
-
AAMI 11137 1 2006 RA 2015 A12013 A2 2019
ANSI/AAMI/ISO 11137-1:2006/(R)2015 & A1:2013 & A2:2019 – Sterilization of health care products-Radiation-Part 1: Requirements for…
-
BS EN ISO 11731:2017
Water quality. Enumeration of Legionella Published By Publication Date Number of Pages BSI 2017 50
-
BS EN ISO 11737-1:2018
Sterilization of health care products. Microbiological methods – Determination of a population of microorganisms on…
-
AAMI 11137 2 2013 RA 2019:2017 Edition
ANSI/AAMI/ ISO 11137-2: 2013/(R)2019 – Sterilization of health care products-Radiation-Part 2: Establishing the sterilization dose…
-
ISO 11137-3:2006
Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects Published…
-
BS EN ISO 11337:2010:2011 Edition
Plastics. Polyamides. Determination of e-caprolactam and w-laurolactam by gas chromatography Published By Publication Date Number…
-
BS EN ISO 1737:2008:2009 Edition
Evaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric method (Reference method) Published…
-
BS EN ISO 11337:2004:2009 Edition
Plastics. Polyamides. Determination of e-caprolactam and w-laurolactum by gas chromatography Published By Publication Date Number…
-
BS EN ISO 11737-2:2020
Sterilization of health care products. Microbiological methods – Tests of sterility performed in the definition,…
-
BS EN ISO 12737:2010:2011 Edition
Metallic materials. Determination of plane-strain fracture toughness Published By Publication Date Number of Pages BSI…
-
CAN/CSA-ISO 11137-2:16 (R2021):2016 Edition
Sterilization of health care products – Radiation – Part 2: Establishing the sterilization dose Published…
-
BSI PD ISO/TR 17737:2007
Workplace air. Guidelines for selecting analytical methods for sampling and analyzing isocyanates in air Published…
-
BS EN ISO 11137-3:2017
Sterilization of health care products. Radiation – Guidance on dosimetric aspects of development, validation and…
-
BS EN ISO 11737-1:2006:2011 Edition
Sterilization of medical devices. Microbiological methods – Determination of a population of microorganisms on products…
-
BS ISO 11237-2:2006
Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification – Water-based fluid…
-
BS EN ISO 11733:2004:2005 Edition
Water quality. Determination of the elimination and biodegradability of organic compounds in an aqueous medium.…
-
ISO/TR 17165-2:2006
Hydraulic fluid power — Hose assemblies — Part 2: Recommended practices for hydraulic hose assemblies…
-
BS EN ISO 11732:2005:2004 Edition
Water quality. Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric…