ISO 14324:2003
$19.50
Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints
| Published By | Publication Date | Number of Pages |
| ISO | 2003-07 | 16 |
ISO 14324:2003 specifies test specimens and procedures for fatigue testing spot welds, at ambient conditions, under repeated tensile loading to produce either shear or cross-tension loading of the spot weld, in steel of sheet thicknesses of 0,5 mm to 6 mm. The test results are not, in general, directly applicable to the fatigue behaviour of a spot-welded component or structure. This procedure can be used for other materials provided proper test conditions (e.g., heating) have been determined.
Related products
-
BS ISO 1432:2013
Rubber, vulcanized or thermoplastic. Determination of low-temperature stiffening (Gehman test) Published By Publication Date Number…
-
ISO 14329:2003
Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance…
-
ISO 15324:2000
Corrosion des métaux et alliages — Évaluation de la résistance à la fissuration par corrosion…
-
ISO/TR 11071-1:2004
Comparison of worldwide lift safety standards — Part 1: Electric lifts (elevators) Published By Publication…
-
BS EN ISO 14327:2004
Resistance welding. Procedures for determining the weldability lobe for resistance spot, projection and seam welding…
-
BS EN ISO 14324:2003
Resistance spot welding. Destructive tests of welds. Method for the fatigue testing of spot welded…
-
ISO 14327:2004
Soudage par résistance — Modes opératoires pour la détermination du domaine de soudabilité pour le…
-
ISO 14924:2005
Thermal spraying — Post-treatment and finishing of thermally sprayed coatings Published By Publication Date Number…
-
BS EN ISO 14323:2006
Resistance spot welding and projection welds. Destructive testing of welds. Specimen dimensions and procedure for…
-
BS EN ISO 14344:2005
Welding and allied processes. Flux and gas shielded electrical welding processes. Procurement guidelines for consumables…
-
ISO 1432:2013
Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test) Published By Publication Date…
-
ISO 14624-2:2003
Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of…
-
BS EN ISO 14024:2001
Environmental labels and declarations. Type I environmental labelling. Principles and procedures Published By Publication Date…
-
ISO 13424:2013
Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis Published…
-
AS/NZS ISO 14344:2005
Welding and allied processes – Flux and gas shielded electrical welding processes – Procurement guidelines…
-
ISO/TS 10303-1324:2008
Industrial automation systems and integration — Product data representation and exchange — Part 1324: Application…
-
ISO 14624-4:2003
Space systems — Safety and compatibility of materials — Part 4: Determination of upward flammability…
-
ISO/TS 14934-4:2007
Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use…
-
BS ISO 14624-2:2023 – TC
Tracked Changes. Space systems – Safety and compatibility of materials – Determination of flammability of…
-
BS EN ISO 14314:2004
Reciprocating internal combustion engines. Recoil starting equipment. General safety requirements Published By Publication Date Number…
-
BS ISO 14624-2:2023
Space systems. Safety and compatibility of materials – Determination of flammability of electrical-wire insulation and…
-
BS EN ISO 14924:2005:2018 Edition
Thermal spraying. Post-treatment and finishing of thermally sprayed coatings Published By Publication Date Number of…
-
ISO 14624-3:2005
Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products…
-
BS ISO 14624-3:2023 – TC
Tracked Changes. Space systems. Safety and compatibility of materials – Part 3: Determination of off-gassed…
-
BS EN ISO 14329:2003
Resistance welding. Destructive tests of welds. Failure types and geometric measurements for resistance spot, seam…
-
BS EN ISO 15324:2008
Corrosion of metals and alloys. Evaluation of stress corrosion cracking by the drop evaporation test…
-
ISO 14624-6:2006
Space systems — Safety and compatibility of materials — Part 6: Determination of reactivity of…
-
ISO 14323:2006
Resistance spot welding and projection welds — Destructive testing of welds — Specimen dimensions and…
-
A5.01M/A5.01:2013 (ISO 14344:2010 Mod) Welding Consumables-Procurement of Filler Metals and Fluxes
A5.01M (ISO 14344:2010 Mod) Welding Consumables-Procurement of Filler Metals and Fluxes Published By Publication Date…
-
ISO/TS 14067:2013
Greenhouse gases — Carbon footprint of products — Requirements and guidelines for quantification and communication…
-
ISO 14624-5:2006
Space systems — Safety and compatibility of materials — Part 5: Determination of reactivity of…
-
ISO 14314:2004
Moteurs alternatifs à combustion interne — Dispositifs de démarrage à réenrouleur — Exigences générales de…
-
BS ISO 14524:2009
Photography. Electronic still-picture Cameras. Methods for measuring optoelectronic conversion functions (OECFs) Published By Publication Date…
-
ISO 14624-1:2003
Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability…
-
ISO 14224:2006
Petroleum, petrochemical and natural gas industries — Collection and exchange of reliability and maintenance data…
-
ISO 14524:2009
Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs) Published By…
-
BS ISO 14624-1:2023
Space systems. Safety and compatibility of materials – Determination of upward flammability of materials Published…
-
ISO 14624-7:2006
Space systems — Safety and compatibility of materials — Part 7: Determination of permeability and…
-
BS ISO 14624-3:2023
Space systems. Safety and compatibility of materials – Determination of off-gassed compounds from materials and…
-
BS ISO 13424:2013
Surface chemical analysis. X-ray photoelectron spectroscopy. Reporting of results of thin-film analysis Published By Publication…
