ISO 4621:1986
$13.00
Pigments verts d’oxyde de chrome — Spécifications et méthodes d’essai
Published By | Publication Date | Number of Pages |
ISO | 1986-07 | 8 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
Specifies three grades, which shall not be in admixture with other colouring matter of organic or inorganic nature and shall be free from extenders. The pigment consists essentially of chromium(III) oxide (Cr2O3) in the form of a dry powder. Grade 1, these pigments shall contain a residue on a sieve of 45 nm mesh aperture of not more than 0,01 % (m/m); grade 2, under the same conditions, shall contain a residue of more than 0,01 % (m/m) and not more than 0,1 % (m/m) and grade 3 shall contain a residue of more than 0,1 % (m/m) and not more than 0,5 % (m/m).
Published Code | ISO |
---|---|
Published By | International Organization for Standardization |
Publication Date | 1986-07 |
Pages Count | 8 |
Language | France |
Edition | 1 |
File Size | 1.1 MB |
ICS Codes | 87.060.10 - Pigments and extenders |
Related products
-
BS EN ISO 4629:1998:1996 Edition
Binders for paints and varnishes. Determination of hydroxyl value. Titrimetric method Published By Publication Date…
-
BS 3971:1980
Specification for image quality indicators for industrial radiography (including guidance on their use) Published By…
-
ISO 5621:1984
Shipbuilding — Bilge mud boxes for machinery spaces and tunnels — General design characteristics Published…
-
BS 7020-12:1988:1989 Edition
Analysis of iron ores – Method for the determination of titanium content: spectrophotometric method Published…
-
ISO 4651:1988/Amd 1:2006
Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1 Published By…
-
ISO 4661-2:1987
Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests Published…
-
BS 3900-H2:1983
Methods of test for paints. Evaluation of paint and varnish defects – Designation of degree…
-
BS 3900-C7:1982
Methods of test for paints. Tests associated with paint film formation – Pressure test for…
-
BS EN ISO 4623:1995
Paints and varnishes. Filiform corrosion test on steel Published By Publication Date Number of Pages…
-
ISO 4629:1996
Binders for paints and varnishes — Determination of hydroxyl value — Titrimetric method Published By…
-
BS 318:1988
Specification for chrome oxide green pigments for paints Published By Publication Date Number of Pages…
-
ISO 4221:1980
Air quality — Determination of mass concentration of sulphur dioxide in ambient air — Thorin…
-
ISO 4626:1980
Volatile organic liquids — Determination of boiling range of organic solvents used as raw materials…
-
ISO 4651:1988
Cellular rubbers and plastics — Determination of dynamic cushioning performance Published By Publication Date Number…
-
BS 6669-1:1986
Methods of test for electroplated silver and silver alloy coatings – Determination of coating thickness…
-
BS 3900-H4:1983
Methods of test for paints. Evaluation of paint and varnish defects – Designation of degree…
-
BS 903-A36:1988
Physical testing of rubber – Preparation of samples and test pieces Published By Publication Date…
-
ISO 461-2:1985
Aircraft — Connectors for ground electrical supplies — Part 2: Dimensions Published By Publication Date…
-
BS 6782-4:1987
Binders for paints – Method for determination of hydroxyl value (titrimetric method) Published By Publication…
-
BS 6669-3:1989
Methods of test for electroplated silver and silver alloy coatings – Detection of residual salts…
-
BS 6337-1:1983
General methods of chemical analysis – Method for determination of traces of sulphur compounds by…
-
ISO 4620:1986
Cadmium pigments — Specifications and methods of test Published By Publication Date Number of Pages…
-
BS EN ISO 4628-5:2003
Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects,…
-
BS EN ISO 4611:2001
Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist…
-
BS EN ISO 4521:2008
Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification…
-
BS 6621:1985
Method for determination of combine harvester capacity and unloading rate Published By Publication Date Number…
-
ISO 4627:1981
Paints and varnishes — Evaluation of the compatibility of a product with a surface to…
-
BS 4651-3:1987
Ammonia solution – Method for determination of residue on evaporation Published By Publication Date Number…
-
BS EN ISO 4651:1995+A1:2008:2009 Edition
Cellular rubbers and plastics. Determination of dynamic cushioning performance Published By Publication Date Number of…
-
ISO/TR 7621:1982
Rubber or plastics covered rollers — Enquiries and orders — Recommendations for technical information to…
-
AS/NZS 4157.1:2000
Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing –…
-
BS 3900-H1:1983
Methods of test for paints. Evaluation of paint and varnish defects – Designation of intensity,…
-
BS 4623:1989
Specification for folded continuous stationery for impact printers Published By Publication Date Number of Pages…
-
BS 4651-2:1987
Ammonia solution – Method for determination of ammonia content Published By Publication Date Number of…
-
BS 3900-H3:1983
Methods of test for paints. Evaluation of paint and varnish defects – Designation of degree…
-
BS 6857:1987
Specification for cadmium pigments for paints Published By Publication Date Number of Pages BSI 1987…
-
BS EN ISO 4628-4:2003
Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects,…
-
BS 3900-C9:1982
Methods of test for paints. Tests associated with paint film formation – Methods for evaluation…
-
ISO 621:1981
Manganese ores — Determination of metallic iron content (metallic iron content not exceeding 2 %)…
-
BS 3900-H5:1983
Methods of test for paints. Evaluation of paint and varnish defects – Designation of degree…