ISO 513:2012
$13.00
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
| Published By | Publication Date | Number of Pages |
| ISO | 2012-11 | 12 |
ISO 513:2012 specifies the classification and application of hard cutting materials, including hardmetals, ceramics, diamond and boron nitride, for machining by chip removal, and establishes their application.
It is not applicable to other uses (mining and other percussion tools, wire drawing dies, tools operating by deformation of the metal and comparator contact tips, etc.).
Related products
-
BS EN ISO 5163:2014
Petroleum products. Determination of knock characteristics of motor and aviation fuels. Motor method Published By…
-
BSI PD CEN ISO/TR 9241-514:2022
Ergonomics of human-system interaction – Guidance for the application of anthropometric data in the ISO…
-
ISO 4513:2010
Road vehicles — Visibility — Method for establishment of eyellipses for driver’s eye location Published…
-
ISO 5130:2019
Acoustique — Mesurage de la pression acoustique émise par les véhicules à l’arrêt Published By…
-
BS EN ISO 5173:2010+A1:2011
Destructive tests on welds in metallic materials. Bend tests Published By Publication Date Number of…
-
BS ISO 5130:2007+A1:2012
Acoustics. Measurements of sound pressure level emitted by stationary road vehicles Published By Publication Date…
-
ISO/IEC TR 14165-313:2013
Information technology — Fibre Channel — Part 313: Avionics Environment — Anonymous Synchronous Messaging (FC-AE-ASM)…
-
ISO 8513:2014
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination…
-
AAMI 10993 13 2010 RA 2014
ANSI/AAMI/ISO 10993-13-2010/(R)2014 – Biological evaluation of medical devices-Part 13: Identification and quantification of degradation products…
-
BS ISO 8513:2016
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination of the…
-
BS ISO 514:2014
Turning tools with carbide tips. Internal tools Published By Publication Date Number of Pages BSI…
-
BS ISO 8513:2016 – TC:2020 Edition
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test methods for the determination…
-
ISO 1513:2010
Paints and varnishes — Examination and preparation of test samples Published By Publication Date Number…
-
BS ISO 516:2019 – TC:2020 Edition
Tracked Changes. Camera shutters. Timing. General definition and mechanical shutter measurements Published By Publication Date…
-
ISO 5163:2014
Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method…
-
BS ISO 5131:2015
Tractors for agriculture and forestry. Measurement of noise at the operator’s position. Survey method Published…
-
BS ISO 813:2019 – TC:2020 Edition
Tracked Changes. Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel…
-
BS ISO 5130:2019
Acoustics. Measurements of sound pressure level emitted by stationary road vehicles Published By Publication Date…
-
BS ISO 516:2019
Camera shutters. Timing. General definition and mechanical shutter measurements Published By Publication Date Number of…
-
ISO 5131:2015
Tracteurs agricoles et forestiers — Mesurage du bruit au poste de conduite de l’opérateur —…
-
BS ISO 513:2012
Classification and application of hard cutting materials for metal removal with defined cutting edges. Designation…
-
ISO 10303-518:2002
Industrial automation systems and integration — Product data representation and exchange — Part 518: Application…
-
ISO/IEC 14776-113:2002
Information technology — Small Computer System Interface (SCSI) — Part 113: Parallel Interface-3 (SPI-3) Published…
-
BS ISO 813:2019
Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method Published…
-
ISO/TS 13399-313:2019
Représentation et échange des données relatives aux outils coupants — Partie 313: Création et échanges…
-
BS ISO 113:2010
Rolling bearings. Plummer block housings. Boundary dimensions Published By Publication Date Number of Pages BSI…
-
BS ISO 813:2010
Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90°C peel method Published…
-
ISO 5173:2009/Amd 1:2011
Destructive tests on welds in metallic materials — Bend tests — Amendment 1 Published By…
-
ISO 113:2010
Roulements — Paliers — Dimensions d’encombrement Published By Publication Date Number of Pages ISO 2010-07…
-
ISO 516:2019
Camera shutters — Timing — General definition and mechanical shutter measurements Published By Publication Date…
-
BS ISO 4513:2022
Road vehicles. Visibility. Method for establishment of eyellipses for driver’s eye location Published By Publication…
-
BS ISO 4513:2022 – TC
Tracked Changes. Road vehicles. Visibility. Method for establishment of eyellipses for driver’s eye location Published…
-
ISO 813:2016
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree…
-
ISO 514:2014
Turning tools with carbide tips — Internal tools Published By Publication Date Number of Pages…
-
ISO 5130:2007/Amd 1:2012
Acoustics — Measurements of sound pressure level emitted by stationary road vehicles — Amendment 1…
-
BS EN ISO 9513:2002
Metallic materials. Calibration of extensometers used in uniaxial testing Published By Publication Date Number of…
-
ISO 813:2010
Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree…
-
BS EN ISO 1513:2010
Paints and varnishes. Examination and preparation of test samples Published By Publication Date Number of…
-
BS ISO 4513:2010
Road vehicles. Visibility. Method for establishment of eyellipses for driver’s eye location Published By Publication…
-
ISO/IEC 14776-153:2015
Information technology — Small Computer System Interface (SCSI) — Part 153: Serial Attached SCSI –…
