ISO 6550-4:2009
$27.95
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs
| Published By | Publication Date | Number of Pages |
| ISO | 2009-11 | 16 |
ISO 6550-4:2009 specifies the main characteristics of M8 x 1 sheath-type glow-plugs with conical seating and their cylinder head housing, for use with diesel (compression-ignition) engines.
Related products
-
BS 5550-7.2.6:1991
Cinematography. Production and presentation. Screens and screen luminance – Specification for screen luminance and colour…
-
BS EN ISO 10651-4:2002:2006 Edition
Lung ventilators – Particular requirements for operator-powered resuscitators Published By Publication Date Number of Pages…
-
ISO 7578:2008
Road vehicles — Sheath-type glow-plugs — General requirements and test methods Published By Publication Date…
-
BS ISO 8468:2007 2008
Ships and marine technology. Ship’s bridge layout and associated equipment. Requirements and guidelines Published By…
-
BS ISO 5990:2000 2002
Photography. Processing chemicals. Specifications for potassium sulfite, 650 g/l solution Published By Publication Date Number…
-
BS EN ISO 11135-1:2007
Sterilization of health care products. Ethylene oxide – Requirements for development, validation and routine control…
-
BS EN ISO 11138-3:2009
Sterilization of health care products. Biological indicators – Biological indicators for moist heat sterilization processes…
-
BS ISO 6505:2005 2006
Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals Published By…
-
BS EN 14565:2019 – TC:2020 Edition
Tracked Changes. Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification Published By…
-
ICC StructuralHandbook 2009.pdf
2009 IBC Handbook: Structural Provisions Published By Publication Date Number of Pages ICC 2009 702
-
BS ISO 8567:2002 2004
Cinematography. Maximum permissible area for subtitle on 35 mm and 16 mm motion-picture release prints.…
-
BS ISO 4309:2004+A1:2008:2009 Edition
Cranes. Wire ropes. Care, maintenance, installation, examination and discard Published By Publication Date Number of…
-
BS EN ISO 6520-2:2002
Welding and allied processes. Classification of geometric imperfections in metallic materials – Welding with pressure…
-
BS ISO 2907:2002 2003
Cinematography. Maximum projectable image area on 35 mm motion-picture film. Position and dimensions Published By…
-
BS EN ISO 6530:2005
Protective clothing. Protection agaist liquid chemicals. Test method for resistance of materials to penetration by…
-
BS ISO 5550:2006
Caseins and caseinates. Determination of moisture content (Reference method) Published By Publication Date Number of…
-
ISO 6550-3:2009
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part…
-
BS EN 14565:2019
Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification Published By Publication Date…
-
BS EN ISO 6520-2:2013
Welding and allied processes. Classification of geometric imperfections in metallic materials – Welding with pressure…
-
BS EN ISO 11197:2009
Medical supply units Published By Publication Date Number of Pages BSI 2009 52
-
BS EN ISO 6570:2004
Natural gas. Determination of potential hydrocarbon liquid content. Gravimetric methods Published By Publication Date Number…
-
BS ISO 6550-4:2014:2015 Edition
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing – M8 x…
-
BS 6248-8:1982
Caseins and caseinates – Method for determination of water content (reference method) Published By Publication…
-
BS ISO 6750-1:2019
Earth-moving machinery. Operator’s manual – Contents and format Published By Publication Date Number of Pages…
-
BS EN ISO 16784-2:2008
Corrosion of metals and alloys. Corrosion and fouling in industrial cooling water systems – Evaluation…
-
BS EN ISO 6520-1:1998
Welding and allied processes. Classification of geometric imperfections in metallic materials – Fusion welding Published…
-
BS EN ISO 6520-1:2007
Welding and allied processes. Classification of geometric imperfections in metallic materials – Fusion welding Published…
-
BS 5550-5.1.2:1993:2004 Edition
Cinematography – Common to more than one film gauge – Raw stock. Specification for the…
-
BS 5550-3.2.2:1986
Cinematography. 35 mm film. Image areas – Specification for the position and dimensions of the…
-
BS 903-A37:1997
Physical testing of rubber – Determination of tendency to adhere to and to corrode metals…
-
BS ISO 1793:2005
Cinematography. Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38…
-
BS ISO 6550-3:2013:2015 Edition
Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing – M10 glow-plugs…
-
BS ISO 8279:2008
Aerospace. Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa…
-
BS ISO 6150:2018:2019 Edition
Pneumatic fluid power. Cylindrical quick-action couplings for maximum working pressures of 1 MPa, 1,6 MPa,…
-
BS ISO 6505:2015
Rubber, vulcanized or thermoplastic. Determination of tendency to adhere to and corrode metals Published By…
-
BS A 317:1997
Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications. 600 MPa (at…
-
BS ISO 6750:2005 2011
Earth-moving machinery. Operator’s manual. Content and format Published By Publication Date Number of Pages BSI…
-
BS ISO 5758:2002 2003
Cinematography. Labelling of containers for motion-picture film and magnetic material. Minimum information for exchange of…
-
BSI PD ISO/TR 6750-2:2020
Earth-moving machinery. Operator’s manual – List of references Published By Publication Date Number of Pages…
-
BS EN ISO/IEC 19796-1:2009
Information technology. Learning, education and training. Quality management, assurance and metrics – General approach Published…
