ISO 7065-2:1985
$19.50
Information processing — Data interchange on 200 mm (8 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, 1,9 tpmm (48 tpi), on both sides — Part 2: Track format
| Published By | Publication Date | Number of Pages |
| ISO | 1985-03 | 15 |
Includes magnetic characteristics, track layout and a track format used on a 200 mm (8 in) flexible disk cartridge, recorded at 13 262 ftprad on both sides using modified frequency modulation recording at a track density of 1,9 tracks per millimetre (tpmm) (48 track per inch – tpi) which is intended for data interchange between data processing systems. Mentioned disk cartridge shall be in conformance with ISO 7065 if meeting all requirements of part 1 and 2 of ISO 7065 and implementing one of the three sector sizes specified in 4.11.
Related products
-
BS 7118-1:1990
Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement…
-
BS EN 1092-2:1997
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, PN designated –…
-
BS EN ISO 7965-2:1997:1995 Edition
Sacks. Drop test – Sacks made from thermoplastic flexible film Published By Publication Date Number…
-
BS ISO/IEC 7064:2003
Information technology. Security techniques. Check character systems Published By Publication Date Number of Pages BSI…
-
BS EN ISO/IEC 9661:1997
Information technology. Data interchange on 12,7 mm wide magnetic tape cartridges. 18 tracks, 1 491…
-
BS 3065:1982
Specification for rating of resistance welding equipment Published By Publication Date Number of Pages BSI…
-
BS 7061:1989
Specification for volume and file structure of compact read only optical disks (CD-ROM) for information…
-
JIS B 2239:2004
Cast iron pipe flanges Published By Publication Date Number of Pages JIS 2004-03-20 23
-
BS 5655-9:1985
Lifts and service lifts – Specification for guide rails Published By Publication Date Number of…
-
BS 6057-3.7:1995
Rubber latices. Methods of test – Determination of density of natural rubber latices Published By…
-
BS EN ISO 7045:2011
Pan head screws with type H or type Z cross recess. Product grade A Published…
-
BS 4504-1:1969:1989 Edition
Circular flanges for pipes, valves and fittings (PN designated) – Ferrous Published By Publication Date…
-
BS MA 53:1975
Specification for ships’ deck machinery – towing winches for deep sea use Published By Publication…
-
BS 4431:1989
Methods of sampling and test for liquefied anhydrous ammonia Published By Publication Date Number of…
-
BS 7025:1988
Method for preparation of test codes of engineering grade for measurement at the operator’s or…
-
BS 7118-2:1989
Measurement of fluid flow: assessment of uncertainty in the calibration and use of flow measurement…
-
BS 6838-1:1987
Testing of sacks. – Method for determination of resistance of paper sacks to vertical impact…
-
BS 6065:1981
Methods for sampling and acceptance testing of shaped refractory products Published By Publication Date Number…
-
BS ISO 7063:2003 2004
Rolling bearings. Needle roller bearing track rollers. Boundary dimensions and tolerances Published By Publication Date…
-
AS/NZS 4331.2:1995 (R2020)
Metallic flanges – Cast iron flanges Published By Publication Date Number of Pages AS 1995-12-05…
-
BS 7035:1989
Code of practice for socketing of stranded steel wire ropes Published By Publication Date Number…
-
AS 2360.7.2:1993 (R2019)
Measurement of fluid flow in closed conduits – Assessment of uncertainty in the calibration and…
-
BS 6211:1982
Specification for operator’s controls for earth-moving machinery: crawler tractors and crawler loaders Published By Publication…
-
BS 6829-4-4.1:1991
Analysis of surface active agents (raw materials). Ethylene oxide adducts – Methods for determination of…
-
ISO 7065-1:1985
Traitement de l’information — Échange de données sur cartouches à disquette de 200 mm (8…
-
ISO 7066-2:1988
Évaluation de l’incertitude dans l’étalonnage et l’utilisation des appareils de mesure du débit — Partie…
-
AS/NZS 4331.3:1995 (R2020)
Metallic flanges – Copper alloy and composite flanges Published By Publication Date Number of Pages…
-
BS 3397:1976
Methods of test for synthetic rubber latices Published By Publication Date Number of Pages BSI…
-
BS 6541:1985
Specification for check character systems for use in information interchange, and guidance on choice and…
-
BS EN 705:1995
Plastics piping systems. Glass-reinforced thermosetting (GRP) pipes and fittings. Methods for regression analyses and their…
-
BS EN 27965-1:1993
Packaging. Sacks. Drop test – Paper sacks Published By Publication Date Number of Pages BSI…
-
JIS B 2239:2013
Cast iron pipe flanges Published By Publication Date Number of Pages JIS 2013-11-20 28
-
BS EN ISO 7045:1995
Pan head screws with type H or type Z cross recess. Product grade A Published…
-
BS ISO 705:2015
Rubber latex. Determination of density between 5 °C and 40 °C Published By Publication Date…
-
BS EN ISO 7765-1:2004
Plastics film and sheeting. Determination of impact resistance by the free-falling dart method – Staircase…
-
BS 6542-1:1984
File structure and labelling of flexible disk cartridges for information interchange – Specification for sequential…
-
ISO 5065-2:1986
Aéronefs — Indicateurs magnétiques — Partie 2: Essais Published By Publication Date Number of Pages…
-
BS ISO 706:2004
Rubber latex. Determination of coagulum content (sieve residue) Published By Publication Date Number of Pages…
-
BS 3065:2001
Resistance welding. Resistance welding equipment. Mechanical and electrical requirements Published By Publication Date Number of…
-
ISO 7005-2:1988
Brides métalliques — Partie 2: Brides en fonte Published By Publication Date Number of Pages…
