ISO 7206-8:1995
$7.80
Implants for surgery — Partial and total hip joint prostheses — Part 8: Endurance performance of stemmed femoral components with application of torsion
| Published By | Publication Date | Number of Pages |
| ISO | 1995-04 | 8 |
Specifies the endurance performance of stemmed femoral components of total hip joint prostheses and stemmed femoral components used alone in partial hip joint replacements as determined under specified laboratory conditions by a method that includes the application of torsion. Does not apply to prostheses for special clinical cases; prostheses for which the centreline of the stem is three-dimensionally curved and does not lie in any plane in which the axis of the neck lies.
Related products
-
BS 7306:1995
Procedures for the operation of the UK scheme for the allocation of ISO DCC format…
-
BS 2000-401:1994
Methods of test for petroleum and its products – Liquefied petroleum gases. Detection of hydrogen…
-
BS EN ISO 1133:2000
Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of…
-
BS 7251-3:1997
Orthopaedic joint prostheses – Specification for classification and designation of dimensions for hip joint prostheses…
-
BS EN ISO 10339:1999
Ophthalmic optics. Contact lenses. Determination of water content of hydrogel lenses Published By Publication Date…
-
BS 7306:1990
Procedures for the operation of the UK scheme for the allocation of ISO-DCC format OSI…
-
BS EN 27941:1994
Methods of test for petroleum and its products. Commercial propane and butane. Analysis by gas…
-
BS EN ISO 10340:1997
Optics and optical instruments. Contact lenses. Method for determination of solvent extractable substances Published By…
-
BS 7251-12:1995
Orthopaedic joint prostheses – Specification for endurance of stemmed femoral components with application of torsion…
-
BS 7279:1990
Specification for graphical symbols for resistance welding equipment Published By Publication Date Number of Pages…
-
BS EN ISO 11987:1998
Ophthalmic optics. Contact lenses. Determination of shelf-life Published By Publication Date Number of Pages BSI…
-
BS ISO/IEC ISP 12067-3:1996:1998 Edition
Information technology. International standardized profile RB. Relaying the connection-mode network service – PSDN subnetwork-dependent media-dependent…
-
BS EN ISO 9339-1:1998
Optics and optical instruments. Contact lenses. Determination of the thickness – Rigid contact lenses Published…
-
BS 2782:1970:1987 Edition
Methods of testing plastics Published By Publication Date Number of Pages BSI 1987 46
-
BS EN ISO 10338:1998
Optics and optical instruments. Contact lenses. Determination of curvature Published By Publication Date Number of…
-
BS 7251-2:1990
Orthopaedic joint prostheses – Specification for classification and designation of dimensions for knee joint prostheses…
-
BS 328-7:1992
Drills and reamers – Counterbores with parallel shanks and solid pilots Published By Publication Date…
-
BS EN 27201-2:1994
Fire protection. Fire extinguishing media. Halogenated hydrocarbons – Code of practice for safe handling and…
-
BS 7251-10:1992
Orthopaedic joint prostheses – Method of determination of endurance properties of the head and neck…
-
BS EN 10003-3:1995
Metallic materials. Brinell hardness test – Calibration of standardized blocks to be used for Brinell…
-
BS 7251-6:1990
Orthopaedic joint prostheses – Method for determination of endurance properties of stemmed femoral components of…
-
BS EN ISO 11981:1999
Ophthalmic optics. Contact lenses and contact lens care products. Determination of physical compatibility of contact…
-
BS 3397:1976
Methods of test for synthetic rubber latices Published By Publication Date Number of Pages BSI…
-
BS EN 27286:1992
Graphical symbols for resistance welding equipment Published By Publication Date Number of Pages BSI 1992…
-
BS EN ISO 9913-1:1998:1997 Edition
Optics and optical instruments. Contact lenses – Determination of oxygen permeability and transmissibility by the…
-
BS 7251-4:1990
Orthopaedic joint prostheses – Specification for bearing surfaces of hip joint prostheses Published By Publication…
-
BS 7251-11:1993
Orthopaedic joint prostheses – Specification for endurance of stemmed femoral components without application of torsion…
-
BS EN 28877:1994
Information technology. Telecommunications and information exchange between systems. Interface connector and contact assignments for ISDN…
-
BS 7251-9:1992
Orthopaedic joint prostheses – Method of determination of resistance to static load of the head…
-
BS 7251-12:1995
Orthopaedic joint prostheses – Specification for endurance of stemmed femoral components with application of torsion…
-
BS EN ISO 9914:1997
Optics and optical instruments. Contact lenses. Determination of refractive index of contact lens materials Published…
-
BS 7251-2:1995
Orthopaedic joint prostheses – Specification for classification, definitions and designation of dimensions of femoral and…
-
BS 7208-3:1992
Contact lenses – Methods of test for contact lenses Published By Publication Date Number of…
-
BS 7252-2:1994
Metallic materials for surgical implants – Specification for unalloyed titanium Published By Publication Date Number…
-
BS EN ISO 8256:1997:1991 Edition
Plastics. Determination of tensile-impact strength Published By Publication Date Number of Pages BSI 1991 24
-
BS EN ISO 9339-2:1998
Optics and optical instruments. Contact lenses. Determination of the thickness – Hydrogel contact lenses Published…
-
BS EN ISO 11980:1998
Ophthalmic optics. Contact lenses and contact lens care products. Guidance for clinical investigations Published By…
-
BS 7251-4:1997
Orthopaedic joint prostheses – Specification for articulating surfaces made of metallic, ceramic and plastics materials…
-
BS AU 50-4.3.1a:1998
Tyres and wheels. Rim profiles and dimensions. Off-the-road rims – Specification for narrow and wide…
-
BS 1127-5:1990
Screwing dies and dienuts – Specification for dimensions of hexagon dienuts Published By Publication Date…
