ISO 7530-8:1992
$13.00
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 8: Determination of silicon content
| Published By | Publication Date | Number of Pages |
| ISO | 1992-09 | 6 |
Silicon content can be determined in the range of 0,2 % (m/m) to 1 % (m/m). The principle is dissolution of a test portion in acid, aspiration of the test solution into a nitrous oxide-acetylene flame of an atomic absorption spectrometer, measurement of the absorbance of the resonance line energy from the spectrum of silicon and comparison with that of calibration solutions at 251,6 nm.
Related products
-
ISO 9618:1996
Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications:…
-
BS 1610-3:1990:1991 Edition
Materials testing machines and force verification equipment – Specification for the grading of the forces…
-
BS 2000-40:1995
Methods of test for petroleum and its products – Petroleum products. Determination of oxidation stability…
-
ISO 10096:1997
Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications:…
-
BS 7455-8:1992
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of silicon…
-
BS 2481-1:1982
Typewriters – Specification for keyboard arrangements Published By Publication Date Number of Pages BSI 1982…
-
BS EN 10002-2:1992
Tensile testing of metallic materials – Verification of the force measuring system of the tensile…
-
BS 7455-4:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 1841-1:1991
Rear-mounted, three-point linkage on agricultural wheeled tractors – Specification for categories 1, 2 and 3…
-
BS 7455-9:1994
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of vanadium…
-
BS EN ISO 7539-4:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of uniaxially loaded…
-
ISO 9199:1998
Aerospace — Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 degrees C,…
-
BS 1841-1:1996
Rear-mounted, three-point linkage on agricultural wheeled tractors – Specification for categories 1, 2, 3 and…
-
BS 7455-6:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 7455-7:1992
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of aluminium…
-
BS EN ISO 7536:1996
Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of…
-
BS 7550-1:1992
Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in ships – Method of stereo-photogrammetry Published…
-
BS ISO/IEC 7350:1991:1992 Edition
Information technology. Registration of repertoires of graphic characters from ISO/IEC 10367 Published By Publication Date…
-
ISO 4147:1997
Aéronautique et espace — Écrous hexagonaux à créneaux, hauteur normale, surplats normaux, à filetage MJ,…
-
BS 1610-1:1992
Materials testing machines and force verification equipment – Specification for the grading of the forces…
-
BS EN ISO 7500-2:1999
Metallic materials. Verification of static uniaxial testing machines – Tension creep testing machines. Verification of…
-
ISO 7530-7:1992
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 7: Determination of aluminium content…
-
BS EN ISO 7539-2:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of bent-beam specimens…
-
BS 7550-2:1993
Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in ships – Triangulation method Published By…
-
BS 7455-1:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – General requirements and sample dissolution…
-
BS 7530-1:1992
Methods for froth flotation testing of hard coal – Laboratory procedure Published By Publication Date…
-
BS EN ISO 7539-3:1995:1994 Edition
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of U-bend specimens…
-
BS EN 368:1993
Protective clothing. Protection against liquid chemicals. Test method: resistance of materials to penetration by liquids…
-
BS EN ISO 7730:1995
Moderate thermal environments. Determination of the PMV and PPD indices and specification of the conditions…
-
BS 2000-431:1998
Methods of test for petroleum and its products – Petroleum products. Determination of acid number.…
-
BS 7455-3:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS EN ISO 7500-1:1999
Metallic materials. Verification of static uniaxial testing machines – Tension/compression testing machines. Verification and calibration…
-
BS 7455-2:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS EN ISO 7539-7:1995:1990 Edition
Corrosion of metals and alloys. Stress corrosion testing – Slow strain rate testing Published By…
-
BS 7455-5:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS ISO 7530-1:2015
Nickel alloys. Flame atomic absorption spectrometric analysis – Determination of cobalt, chromium, copper, iron and…
-
ISO 16798:2004
Links of Grade 8 for use with slings Published By Publication Date Number of Pages…
-
ISO 13589:1998
Aéronautique et espace — Écrous bi hexagonaux à freinage interne, avec chambrage et filetage MJ,…
-
BS 4317-27:1992
Methods of test for cereals and pulses – Determination of rheological properties of doughs using…
-
BS EN ISO 7500-1:2004:2010 Edition
Metallic materials. Verification of static uniaxial testing machines – Tension/compression testing machines. Verification and calibration…
