ISO 7530-9:1993
$13.00
Nickel alloys — Flame atomic absorption spectrometric analysis — Part 9: Determination of vanadium content
| Published By | Publication Date | Number of Pages |
| ISO | 1993-08 | 6 |
The principle of the method specified is dissolving a test portion in acid, aspiring the test solution into a nitrous oxide-acetylene flame of an atomic absorption spectrometer, measuring the absorbance of the resonance line energy from the spectrum of vanadium and comparison with that of calibration solutions at a wavelength of 318,4 nm. The method may be used to determine vanadium contents in the range of 0,05 % (m/m) to 1 % (m/m).
Related products
-
BS 7550-2:1993
Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in ships – Triangulation method Published By…
-
BS 7455-5:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 7455-2:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS 7455-3:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS ISO 7530-1:2015
Nickel alloys. Flame atomic absorption spectrometric analysis – Determination of cobalt, chromium, copper, iron and…
-
BS 1841-1:1991
Rear-mounted, three-point linkage on agricultural wheeled tractors – Specification for categories 1, 2 and 3…
-
BS 7087-11:1996
Herbs and spices ready for food use – Specification for ground paprika Published By Publication…
-
BS EN ISO 7536:1996
Methods of test for petroleum and its products. Petroleum products. Determination of oxidation stability of…
-
BS 7455-9:1994
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of vanadium…
-
BS EN ISO 7539-7:1995:1990 Edition
Corrosion of metals and alloys. Stress corrosion testing – Slow strain rate testing Published By…
-
BS EN ISO 7539-5:1995
Corrosion of metals and alloys. Stress corrosion testing – Method for the preparation and use…
-
BS 7550-1:1992
Calibration of spherical tanks for refrigerated light-hydrocarbon fluids in ships – Method of stereo-photogrammetry Published…
-
BS EN 368:1993
Protective clothing. Protection against liquid chemicals. Test method: resistance of materials to penetration by liquids…
-
BS EN ISO 7539-6:2003
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of pre-cracked specimens…
-
BS 1610-3:1990:1991 Edition
Materials testing machines and force verification equipment – Specification for the grading of the forces…
-
BS 4317-27:1992
Methods of test for cereals and pulses – Determination of rheological properties of doughs using…
-
BS EN ISO 7500-2:1999
Metallic materials. Verification of static uniaxial testing machines – Tension creep testing machines. Verification of…
-
BS 7455-6:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS EN ISO 7539-4:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of uniaxially loaded…
-
BS 7530-1:1992
Methods for froth flotation testing of hard coal – Laboratory procedure Published By Publication Date…
-
BS EN ISO 7539-7:2005
Corrosion of metals and alloys. Stress corrosion testing – Method for slow strain rate testing…
-
BS EN ISO 7539-3:1995:1994 Edition
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of U-bend specimens…
-
BS EN 10002-2:1992
Tensile testing of metallic materials – Verification of the force measuring system of the tensile…
-
BS 2000-40:1995
Methods of test for petroleum and its products – Petroleum products. Determination of oxidation stability…
-
BS 7455-7:1992
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of aluminium…
-
BS EN ISO 8655-6:2002 2009
Piston-operated volumetric apparatus – Gravimetric methods for the determination of measurement error Published By Publication…
-
BS EN ISO 7500-1:1999
Metallic materials. Verification of static uniaxial testing machines – Tension/compression testing machines. Verification and calibration…
-
BS EN ISO 7500-2:2006 2007
Metallic materials. Verification of static uniaxial testing machines – Tension creep testing machines. Verification of…
-
BS ISO/IEC 7350:1991:1992 Edition
Information technology. Registration of repertoires of graphic characters from ISO/IEC 10367 Published By Publication Date…
-
BS 7455-1:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – General requirements and sample dissolution…
-
BS 7730:1994
Method for liquid penetrant inspection of metallic surgical implants Published By Publication Date Number of…
-
BS 1841-1:1996
Rear-mounted, three-point linkage on agricultural wheeled tractors – Specification for categories 1, 2, 3 and…
-
BS EN ISO 7730:1995
Moderate thermal environments. Determination of the PMV and PPD indices and specification of the conditions…
-
BS 7455-4:1991
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for the determination of…
-
BS EN ISO 7539-2:1995
Corrosion of metals and alloys. Stress corrosion testing – Preparation and use of bent-beam specimens…
-
BS 1610-1:1992
Materials testing machines and force verification equipment – Specification for the grading of the forces…
-
BS 6619:1985
Specification for flammability performance of safety film for still photography Published By Publication Date Number…
-
BS 7455-8:1992
Analysis of nickel alloys by flame atomic absorption spectrometry – Method for determination of silicon…
-
BS 2000-431:1998
Methods of test for petroleum and its products – Petroleum products. Determination of acid number.…
-
BS EN ISO 7500-1:2004:2010 Edition
Metallic materials. Verification of static uniaxial testing machines – Tension/compression testing machines. Verification and calibration…
