SAE AS 6081:2012
$25.35
Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors
| Published By | Publication Date | Number of Pages |
| SAE | 2012-11-07 | 47 |
-
a
identify reliable sources to procure parts,
-
b
assess and mitigate risk of distributing fraudulent/counterfeit parts,
-
c
control suspect or confirmed fraudulent/counterfeit parts,
-
d
and report suspect and confirmed fraudulent/counterfeit parts to other potential users and Authority Having Jurisdiction.
Related products
-
SAE AS 608:2002
High Pressure Compressed Gas Hose Assemblies for Aircraft and Missile Ground Support Equipment Published By…
-
SAE AIR 6031:2012
Fiber Optic Cleaning Published By Publication Date Number of Pages SAE 2012-08-10 18
-
SAE AMS 4150N:2019
Aluminum Alloy, Extrusions and Rings 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr – (6061-T6) Solution…
-
SAE ARP 6881:2018
Guidelines for the Use and Installation of Bonded Cable Harness Supports Published By Publication Date…
-
SAE EIA 681:2015
Assessment Guide for Process Certification Published By Publication Date Number of Pages SAE 2015-07-01 57
-
SAE AMS 4080P:2016
Aluminum Alloy, Drawn Seamless Tubing 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-O) Annealed Published…
-
SAE AMS 4248D:2018
Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T652)…
-
SAE AMS 4027P:2022
Aluminum Alloy, Sheet and Plate 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061; -T6 Sheet,…
-
SAE AMS 4294A:2010
Aluminum Alloy Extrusions, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T5511), Press Heat Treated, Stress…
-
SAE AMS 4312E:2022
Aluminum Alloy, Rolled or Forged Rings 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T651, 6061-T652)…
-
SAE AMS 4021H:2017
Aluminum Alloy, Alclad Sheet and Plate, 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (Alclad 6061-0)…
-
SAE AS 27194C:2018
Seal, Bonded, Aluminum Alloy 6061-T6, AMS4027, Mold in Groove, NBR Rubber, AMS-P-5315 Published By Publication…
-
IEC 60811-403:2012
Electric and optical fibre cables – Test methods for non-metallic materials – Part 403: Miscellaneous…
-
SAE AMS 4300D:2017
Boron-Aluminum Composite Sheet 50 V/O 5.6B, 6061-0, for Diffusion Bonding Published By Publication Date Number…
-
SAE AMS 4116K:2021
Aluminum Alloy, Bars, Rods, and Wire 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T4) Cold…
-
SAE J 2081:2019
Test Procedure for Determining the Resistance of Safety-Glazing Materials, of Which One Surface Is Plastic,…
-
SAE AMS 4023F:2015
Aluminum Alloy Sheet and Plate, Alclad 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (Alclad 6061;…
-
SAE AMSWWT 700/6C:2015
Tube, Aluminum Alloy, Drawn, Seamless, 6061 Published By Publication Date Number of Pages SAE 2015-09-14…
-
SAE AMS 4083M:2019
Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T6)…
-
SAE AMS 4128E:2021
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T451)…
-
SAE AS 6089:2017
Verification Methods for AS5653 Network Controller Published By Publication Date Number of Pages SAE 2017-10-11…
-
SAE AMS 4009C:2017
Aluminum Alloy Foil 1.0Mg – 0.6Si – 0.30Cu – 0.20Cr (6061-0) Annealed Published By Publication…
-
BSI PD CEN/TR 17608:2022
State of the art on the use of flammable refrigerant alternatives, in particular from class…
-
DIN EN 755-8:2016 Edition
Aluminium and aluminium alloys – Extruded rod/bar, tube and profiles – Part 8: Porthole tubes,…
-
SAE AMS 4127K:2019
Aluminum Alloy, Forgings and Rolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated Published…
-
SAE ARP 601:2002
Hose Assemblies, Flexible, Metal, Aeronautical, Low Pressure Published By Publication Date Number of Pages SAE…
-
SAE AMS 4411A:2019
Aluminum Alloy Plate (7081-T7651) 7.2Zn – 1.5Cu – 2.0Mg – 0.10Zr Solution Heat Treated, Stress…
-
SAE AMS 4113F:2014
Aluminum Alloy, Extruded Profiles 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T6) Solution and Precipitation…
-
SAE AMS 4115K:2021
Aluminum Alloy, Rolled or Cold-Finished, Bars, Rods, Wire, and Flash Welded Rings and Stock for…
-
SAE AMS 4172G:2019
Aluminum Alloy, Extrusions 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-T4511 or T4510) Solution Heat…
-
SAE AS 6091:2014
JAUS Unmanned Ground Vehicle Service Set Published By Publication Date Number of Pages SAE 2014-07-29…
-
SAE AMSQQA 200/8A:2015
Aluminum Alloy 6061, Bar, Rod, Shapes, Tube, and Wire, Extruded A96061 Published By Publication Date…
-
SAE AMS 4079H:2017
Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg – 0.60Si – 0.28Cu – 0.20Cr (6061-O) Close…
-
SAE AMSQQA 225/8B:2010
Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished Published…
-
SAE AS 6071:2014
Bushing, Sleeve, Plain Clamp-Up Published By Publication Date Number of Pages SAE 2014-12-29 2
-
SAE AMS 4410A:2019
Aluminum Alloy Plate (7081-T7451) 7.2Zn – 1.5Cu – 2.0Mg – 0.10Zr Solution Heat Treated, Stress…
-
SAE AS 6088:2019
Verification Methods for AS5653 Network Terminal Published By Publication Date Number of Pages SAE 2019-04-24…
-
SAE AMS 4146H:2021
Aluminum Alloy Forgings and Rolled or Forged Rings and Forging Stock 1.0Mg – 0.60Si –…
-
IEC 60811-509:2012
Electric and optical fibre cables – Test methods for non-metallic materials – Part 509: Mechanical…
-
SAE AMS 4173G:2019
Aluminum Alloy, Extrusions 1.0Mg – 0.60Si – 0.30Cu – 0.20Cr (6061-T6511 or T6510) Solution Heat…
