{"id":194394,"date":"2024-10-19T12:20:06","date_gmt":"2024-10-19T12:20:06","guid":{"rendered":"https:\/\/pdfstandards.shop\/product\/uncategorized\/iapmo-upc-2018-2ndprint\/"},"modified":"2024-10-25T04:51:10","modified_gmt":"2024-10-25T04:51:10","slug":"iapmo-upc-2018-2ndprint","status":"publish","type":"product","link":"https:\/\/pdfstandards.shop\/product\/publishers\/iapmo\/iapmo-upc-2018-2ndprint\/","title":{"rendered":"IAPMO UPC 2018 2ndPrint"},"content":{"rendered":"

The 2018 edition of the Uniform Plumbing Code (UPC\u00a9) represents the most current approaches in the plumbing field.  It is the sixth edition developed under the ANSI Consensus process is designated as an American National Standards by the American National Standards Institute (ANSI). Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers\/maintainers, labor, manufacturers, research\/standards\/ testing laboratories, special experts and users.<\/p>\n

PDF Catalog<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
PDF Pages<\/th>\nPDF Title<\/th>\n<\/tr>\n
1<\/td>\nCover <\/td>\n<\/tr>\n
3<\/td>\nCopyright <\/td>\n<\/tr>\n
4<\/td>\nImportant Notices and Disclaimers <\/td>\n<\/tr>\n
5<\/td>\nFOREWORD <\/td>\n<\/tr>\n
7<\/td>\nFORMAT OF THE UNIFORM PLUMBING CODE <\/td>\n<\/tr>\n
13<\/td>\nSAMPLE LEGISLATION FOR ADOPTION OF THE UNIFORM PLUMBING CODE <\/td>\n<\/tr>\n
14<\/td>\nCOMMITTEE ON UNIFORM PLUMBING CODE <\/td>\n<\/tr>\n
15<\/td>\nSECTION RELOCATION <\/td>\n<\/tr>\n
18<\/td>\nTABLE OF CONTENTS <\/td>\n<\/tr>\n
35<\/td>\n509.11 Vent Connectors for Category II,
\n Category III, and Category <\/td>\n<\/tr>\n
36<\/td>\nCHAPTER 1 ADMINISTRATION
101.0 General
101.1 Title
101.2 Scope
101.3 Purpose
101.4 Unconstitutional
101.5 Validity
102.0 Applicability
102.1 Conflicts Between Codes
102.2 Existing Installations
102.3 Maintenance
102.4 Additions, Alterations,
\n Renovations, or Repairs
102.5 Health and Safety
102.6 Changes in Building Occupancy
102.7 Moved Structures
102.8 Appendices <\/td>\n<\/tr>\n
37<\/td>\n103.0 Duties and Powers of the
\n Authority Having Jurisdiction
103.1 General
103.2 Liability
103.3 Applications and Permits
103.4 Right of Entry
104.0 Permits
104.1 Permits Required
104.2 Exempt Work
104.3 Application for Permit <\/td>\n<\/tr>\n
38<\/td>\n104.4 Permit Issuance
1318.7 Initial Leak Test \u2013 Category <\/td>\n<\/tr>\n
39<\/td>\n104.5 Fees
105.0 Inspections and Testing
105.1 General
105.2 Required Inspections <\/td>\n<\/tr>\n
40<\/td>\n105.3 Testing of Systems
105.4 Connection to Service Utilities
106.0 Violations and Penalties
106.1 General
106.2 Notices of Correction or Violation
106.3 Penalties <\/td>\n<\/tr>\n
41<\/td>\n106.4 Stop Orders
106.5 Authority to Disconnect Utilities
\n in Emergencies
106.6 Authority to Condemn
107.0 Board of Appeals
107.1 General
107.2 Limitations of Authority <\/td>\n<\/tr>\n
42<\/td>\nTable 104.5 Plumbing Permit Fees <\/td>\n<\/tr>\n
44<\/td>\nCHAPTER 2 DEFINITIONS
201.0 General
201.1 Applicability
202.0 Definition of Terms
202.1 General <\/td>\n<\/tr>\n
56<\/td>\nCHAPTER 3 GENERAL REGULATIONS
301.0 General
301.1 Applicability
301.2 Minimum Standards
301.3 Alternate Materials and Methods
\n of Construction Equivalency
301.4 Flood Hazard Areas <\/td>\n<\/tr>\n
57<\/td>\n301.5 Alternative Engineered Design
302.0 Iron Pipe Size (IPS) Pipe
302.1 General
303.0 Disposal of Liquid Waste
303.1 General
304.0 Connections to Plumbing
\n System Required
304.1 General
305.0 Damage to Drainage System
\n or Public Sewer
305.1 Unlawful Practices
306.0 Industrial Wastes
306.1 Detrimental Wastes
306.2 Safe Discharge
307.0 Location
307.1 System <\/td>\n<\/tr>\n
58<\/td>\n307.2 Ownership
308.0 Improper Location
308.1 General
309.0 Workmanship
309.1 Engineering Practices
309.2 Concealing Imperfections
309.3 Burred Ends
309.4 Installation Practices
309.5 Sound Transmission
310.0 Prohibited Fittings and
\n Practices
310.1 Fittings
310.2 Drainage and Vent Piping
310.3 Waste Connection
310.4 Use of Vent and Waste Pipes
310.5 Obstruction of Flow
310.6 Dissimilar Metals
310.7 Direction of Flow
310.8 Screwed Fittings
311.0 Independent Systems
311.1 General
312.0 Protection of Piping, Materials,
\n and Structures
312.1 General
312.2 Installation <\/td>\n<\/tr>\n
59<\/td>\n312.3 Building Sewer and Drainage
\n Piping
312.4 Corrosion, Erosion, and
\n Mechanical Damage
312.5 Protectively Coated Pipe
312.6 Freezing Protection
312.7 Fire-Resistant Construction
312.8 Waterproofing of Openings
312.9 Steel Nail Plates
312.10 Sleeves
312.11 Structural Members
312.12 Rodentproofing
313.0 Hangers and Supports
313.1 General
313.2 Material
313.3 Suspended Piping
313.4 Alignment
313.5 Underground Installation
313.6 Hanger Rod Sizes
Table 313.6 Hanger Rod Sizes
313.7 Gas Piping <\/td>\n<\/tr>\n
60<\/td>\n314.0 Trenching, Excavation, and
\n Backfill
314.1 Trenches
314.2 Tunneling and Driving
314.3 Open Trenches
314.4 Excavations
315.0 Joints and Connections
315.1 Unions
315.2 Prohibited Joints and
\n Connections
316.0 Increasers and Reducers
316.1 General
317.0 Food-Handling Establishments
317.1 General
318.0 Test Gauges
318.1 General
318.2 Pressure Tests (10 psi or less
318.3 Pressure Tests (greater than
\n 10 psi to 100 psi
318.4 Pressure Tests (exceeding
\n 100 psi <\/td>\n<\/tr>\n
61<\/td>\n318.5 Pressure Range
319.0 Medical Gas and Vacuum
\n Systems
319.1 General
320.0 Rehabilitation of Piping Systems
320.1 General
Table 313.3 Hangers and Supports <\/td>\n<\/tr>\n
62<\/td>\nCHAPTER 4 PLUMBING FIXTURES
\n AND FIXTURE FITTINGS
401.0 General
401.1 Applicability
401.2 Quality of Fixtures
402.0 Installation
402.1 Cleaning
402.2 Joints
402.3 Securing Fixtures
402.4 Wall-Hung Fixtures
402.5 Setting
402.6 Flanged Fixture Connections
402.7 Supply Fittings
402.8 Installation <\/td>\n<\/tr>\n
63<\/td>\n402.9 Design and Installation of
\n Plumbing Fixtures
402.10 Slip Joint Connections
402.11 Future Fixtures
403.0 Accessible Plumbing Facilities
403.1 General
403.2 Fixtures and Fixture Fittings
\n for Persons with Disabilities
403.3 Exposed Pipes and Surfaces
404.0 Waste Fittings and Overflows
404.1 Waste Fittings
404.2 Overflows
405.0 Prohibited Fixtures
405.1 Prohibited Water Closets
405.2 Prohibited Urinals
405.3 Miscellaneous Fixtures
406.0 Special Fixtures and Specialties
406.1 Water and Waste Connections
406.2 Special Use Sinks
406.3 Special Use Fixtures
406.4 Zinc Alloy Components
407.0 Lavatories
407.1 Application
407.2 Water Consumption
407.3 Limitation of Hot Water
\n Temperature for Public
\n Lavatories <\/td>\n<\/tr>\n
64<\/td>\n407.4 Transient Public Lavatories
407.5 Waste Outlet
407.6 Overflow
408.0 Showers
408.1 Application
408.2 Water Consumption
408.3 Individual Shower and
\n Tub-Shower Combination
\n Control Valves
408.4 Waste Outlet
408.5 Finished Curb or Threshold
408.6 Shower Compartments
408.7 Lining for Showers and
\n Receptors <\/td>\n<\/tr>\n
65<\/td>\n408.8 Public Shower Floors
408.9 Location of Valves and Heads
408.10 Water Supply Riser
409.0 Bathtubs and Whirlpool
\n Bathtubs
409.1 Application
409.2 Waste Outlet
409.3 Overflow
409.4 Limitation of Hot Water in
\n Bathtubs and Whirlpool
\n Bathtubs
409.5 Backflow Protection <\/td>\n<\/tr>\n
66<\/td>\n409.6 Installation and Access
410.0 Bidets
410.1 Application
410.2 Backflow Protection
410.3 Limitation of Water
\n Temperature in Bidets
411.0 Water Closets
411.1 Application
411.2 Water Consumption
411.3 Water Closet Seats
411.4 Personal Hygiene Devices
412.0 Urinals
412.1 Application
412.2 Backflow Protection
413.0 Flushing Devices
413.1 Where Required
413.2 Flushometer Valves <\/td>\n<\/tr>\n
67<\/td>\n413.3 Flush Tanks
413.4 Water Supply for Flush Tanks
413.5 Overflows in Flush Tanks
414.0 Dishwashing Machines
414.1 Application
414.2 Backflow Protection
414.3 Drainage Connection
415.0 Drinking Fountains
415.1 Application
415.2 Drinking Fountain Alternatives
415.3 Drainage Connection
415.4 Location
416.0 Emergency Eyewash and
\n Shower Equipment
416.1 Application
416.2 Water Supply
416.3 Installation
416.4 Location
416.5 Drain
417.0 Faucets and Fixture Fittings
417.1 Application
417.2 Deck Mounted Bath\/Shower
\n Valves
417.3 Handheld Showers
417.4 Faucets and Fixture Fittings
\n with Hose Connected Outlets
417.5 Separate Controls for Hot
\n and Cold Water <\/td>\n<\/tr>\n
68<\/td>\n418.0 Floor Drains
418.1 Application
418.2 Strainer
418.3 Location of Floor Drains
418.4 Food Storage Areas
418.5 Floor Slope
419.0 Food Waste Disposers
419.1 Application
419.2 Drainage Connection
419.3 Water Supply
420.0 Sinks
420.1 Application
420.2 Water Consumption
420.3 Pre-Rinse Spray Valve
420.4 Waste Outlet
421.0 Floor Sinks
421.1 Application
421.2 Strainers
422.0 Minimum Number of
\n Required Fixtures
422.1 Fixture Count <\/td>\n<\/tr>\n
69<\/td>\n422.2 Separate Facilities
422.3 Fixture Requirements for
\n Special Occupancies
422.4 Toilet Facilities Serving
\n Employees and Customers
422.5 Toilet Facilities for Workers <\/td>\n<\/tr>\n
70<\/td>\nTable 422.1 Minimum Plumbing Facilities <\/td>\n<\/tr>\n
76<\/td>\nCHAPTER 5 WATER HEATERS
501.0 General
501.1 Applicability
Table 501.1(1) Water Heaters
502.0 Permits
502.1 General
503.0 Inspection
503.1 Inspection of Chimneys or Vents
503.2 Final Water Heater Inspection
504.0 Water Heater Requirements
504.1 Location
504.2 Vent
Table 501.1(2) First Hour Rating <\/td>\n<\/tr>\n
77<\/td>\n504.3 Clearance
504.4 Pressure-Limiting Devices
504.5 Temperature-Limiting Devices
504.6 Temperature, Pressure, and
\n Vacuum Relief Devices
505.0 Oil-Burning and Other Water
\n Heaters
505.1 Water Heaters
505.2 Safety Devices
505.3 Oil-Fired Water Heaters
505.4 Indirect-Fired Water Heaters
506.0 Air for Combustion and
\n Ventilation
506.1 General <\/td>\n<\/tr>\n
78<\/td>\n506.2 Indoor Combustion Air
506.3 Indoor Opening Size and
\n Location
506.4 Outdoor Combustion Air <\/td>\n<\/tr>\n
80<\/td>\n506.5 Combination Indoor and
\n Outdoor Combustion Air
506.6 Engineered Installations
506.7 Mechanical Combustion Air
\n Supply
506.8 Louvers, Grilles, and Screens
506.9 Combustion Air Ducts <\/td>\n<\/tr>\n
81<\/td>\n507.0 Appliance and Equipment
\n Installation Requirements
507.1 Dielectric Insulator
507.2 Seismic Provisions
507.3 Appliance Support
507.4 Ground Support
507.5 Drainage Pan
507.6 Added or Converted
\n Equipment or Appliances
507.7 Types of Gases
507.8 Safety Shutoff Devices for
\n Unlisted LP-Gas Appliance
\n Used Indoors
507.9 Use of Air or Oxygen Under
\n Pressure
507.10 Protection of Gas Appliances
\n from Fumes or Gases other
\n than Products of Combustion
507.11 Process Air
507.12 Flammable Vapors
507.13 Installation in Residential
\n Garages <\/td>\n<\/tr>\n
82<\/td>\n507.14 Installation in Commercial
\n Garages
507.15 Installation in Aircraft Hangars
507.16 Venting of Flue Gases
507.17 Extra Device or Attachment
507.18 Adequate Capacity of Piping
507.19 Avoiding Strain on Gas Piping
507.20 Gas Appliance Pressure
\n Regulators
507.21 Venting of Gas Appliance
\n Pressure Regulators
507.22 Bleed Lines for Diaphragm-Type
\n Valves
507.23 Combination of Appliances
\n and Equipment
507.24 Installation Instructions <\/td>\n<\/tr>\n
83<\/td>\n507.25 Protection of Outdoor
\n Appliances
507.26 Accessibility for Service
507.27 Clearance to Combustible
\n Materials
508.0 Appliances on Roofs
508.1 General
508.2 Installation of Appliances
\n on Roofs
508.3 Appliances on Roofs
508.4 Appliances in Attics and
\n Under-Floor Spaces <\/td>\n<\/tr>\n
84<\/td>\n509.0 Venting of Appliances
509.1 Listing
509.2 Connection to Venting Systems
509.3 Design and Construction <\/td>\n<\/tr>\n
85<\/td>\n509.4 Type of Venting System to
\n be Used
Table 509.4 Type of Venting System to
\n be Used
509.5 Masonry, Metal, and
\n Factory-Built Chimneys <\/td>\n<\/tr>\n
87<\/td>\n509.6 Gas Vents <\/td>\n<\/tr>\n
88<\/td>\nTable 509.6.1 Roof Slope Heights <\/td>\n<\/tr>\n
90<\/td>\n509.7 Single-Wall Metal Pipe
Table 509.7.3.4(1) Clearance for Connectors <\/td>\n<\/tr>\n
92<\/td>\nTable 509.7.3.4(2) Reduction of Clearances with
\n Specified Forms of Protection <\/td>\n<\/tr>\n
93<\/td>\n509.8 Through-the-Wall Vent
\n Termination <\/td>\n<\/tr>\n
94<\/td>\n509.9 Condensation Drain
509.10 Vent Connectors for
\n Category I Appliances <\/td>\n<\/tr>\n
95<\/td>\nTable 509.10.1.3 Minimum Thickness for
\n Galvanized Steel Vent
\n Connectors for Low-Heat
\n Appliances
Table 509.10.1.4 Minimum Thickness for Steel
\n Vent Connectors for
\n Medium-Heat Appliances <\/td>\n<\/tr>\n
96<\/td>\nAppliances
509.12 Draft Hoods and Draft Controls <\/td>\n<\/tr>\n
97<\/td>\n509.13 Manually Operated Dampers
509.14 Automatically Operated
\n Vent Dampers
509.15 Obstructions
510.0 Sizing of Category I Venting
\n Systems
510.1 Single Appliance Vent Table
\n 510.1.2(1) through
\n Table 510.1.2(6 <\/td>\n<\/tr>\n
98<\/td>\n510.2 Multiple Appliance Vent Table
\n 510.2(1) through Table 510.2(9 <\/td>\n<\/tr>\n
99<\/td>\nTable 510.2.1 Vent Connector Maximum
\n Length <\/td>\n<\/tr>\n
103<\/td>\nTable 510.1.2(1) Type B Double-Wall Gas Vent <\/td>\n<\/tr>\n
106<\/td>\nTable 510.1.2(2) Type B Double-Wall Gas Vent <\/td>\n<\/tr>\n
108<\/td>\nTable 510.1.2(3) Masonry Chimney <\/td>\n<\/tr>\n
110<\/td>\nTable 510.1.2(4) Masonry Chimney <\/td>\n<\/tr>\n
112<\/td>\nTable 510.1.2(5) Single-Wall Metal Pipe or
\n Type B Asbestos-Cement Vent <\/td>\n<\/tr>\n
113<\/td>\nTable 510.1.2(6) Exterior Masonry Chimney <\/td>\n<\/tr>\n
114<\/td>\nTable 510.2(1) Type B Double-Wall Vent <\/td>\n<\/tr>\n
118<\/td>\nTable 510.2(2) Type B Double-Wall Vent <\/td>\n<\/tr>\n
120<\/td>\nTable 510.2(3) Masonry Chimney <\/td>\n<\/tr>\n
122<\/td>\nTable 510.2(4) Masonry Chimney <\/td>\n<\/tr>\n
124<\/td>\nTable 510.2(5) Single-Wall Metal Pipe or
\n Type B Asbestos-Cement Vent
Table 510.2(6) Exterior Masonry Chimney <\/td>\n<\/tr>\n
125<\/td>\nTable 510.2(7) Exterior Masonry Chimney <\/td>\n<\/tr>\n
126<\/td>\nTable 510.2(8) Exterior Masonry Chimney <\/td>\n<\/tr>\n
127<\/td>\nTable 510.2(9) Exterior Masonry Chimney <\/td>\n<\/tr>\n
128<\/td>\nCHAPTER 6 WATER SUPPLY AND
\n DISTRIBUTION
601.0 General
601.1 Applicability
601.2 Hot and Cold Water Required
601.3 Identification of a Potable and
\n Nonpotable Water System
Table 601.3.2 Minimum Length of Color
\n Field and Size of Letters
602.0 Unlawful Connections
602.1 Prohibited Installation
602.2 Cross-Contamination <\/td>\n<\/tr>\n
129<\/td>\n602.3 Backflow Prevention
602.4 Approval by Authority
603.0 Cross-Connection Control
603.1 General
603.2 Approval of Devices or
\n Assemblies
603.3 Backflow Prevention Devices,
\n Assemblies, and Methods
603.4 General Requirements <\/td>\n<\/tr>\n
130<\/td>\nTable 603.2 Backflow Prevention Devices,
\n Assemblies, and Methods <\/td>\n<\/tr>\n
132<\/td>\nTable 603.3.1 Minimum Air Gaps for Water
\n Distribution
603.5 Specific Requirements <\/td>\n<\/tr>\n
135<\/td>\n604.0 Materials
604.1 Pipe, Tube, and Fittings
604.2 Lead Content
604.3 Copper or Copper Alloy Tube
604.4 Hard-Drawn Copper or Copper
\n Alloy Tubing
604.5 Flexible Connectors
604.6 Cast-Iron Fittings
604.7 Malleable Iron Fittings
604.8 Previously Used Piping and
\n Tubing
604.9 Epoxy Coating
604.10 Plastic Materials
604.11 Solder
604.12 Flexible Corrugated Connectors <\/td>\n<\/tr>\n
136<\/td>\nTable 604.1 Materials for Building Supply
\n and Water Distribution Piping
\n and Fittings
604.13 Water Heater Connectors
605.0 Joints and Connections
605.1 Copper or Copper Alloy Pipe,
\n Tubing, and Joints <\/td>\n<\/tr>\n
137<\/td>\n605.2 CPVC Plastic Pipe and Joints <\/td>\n<\/tr>\n
138<\/td>\n605.3 CPVC\/AL\/CPVC Plastic Pipe
\n and Joints
605.4 Ductile Iron Pipe and Joints
605.5 Galvanized Steel Pipe and
\n Joints
605.6 PE Plastic Pipe\/Tubing and
\n Joints <\/td>\n<\/tr>\n
139<\/td>\n605.7 PE-AL-PE Plastic Pipe\/Tubing
\n and Joints
605.8 PE-RT
605.9 PEX Plastic Tubing and Joints
605.10 PEX-AL-PEX Plastic Tubing
\n and Joints
605.11 Polypropylene (PP) Piping
\n and Joints <\/td>\n<\/tr>\n
140<\/td>\n605.12 PVC Plastic Pipe and Joints
605.13 Stainless Steel Pipe and Joints
605.14 Slip Joints
605.15 Dielectric Unions
605.16 Joints Between Various
\n Materials
606.0 Valves
606.1 General <\/td>\n<\/tr>\n
141<\/td>\n606.2 Fullway Valve
606.3 Multidwelling Units
606.4 Multiple Openings
606.5 Control Valve
606.6 Accessible
606.7 Multiple Fixtures
607.0 Potable Water Supply Tanks
607.1 General
607.2 Potable Water Tanks
607.3 Venting
607.4 Overflow
607.5 Valves
608.0 Water Pressure, Pressure
\n Regulators, Pressure Relief
\n Valves, and Vacuum Relief
\n Valves
608.1 Inadequate Water Pressure
608.2 Excessive Water Pressure
608.3 Expansion Tanks, and
\n Combination Temperature
\n and Pressure-Relief Valves <\/td>\n<\/tr>\n
142<\/td>\n608.4 Pressure Relief Valves
608.5 Discharge Piping
608.6 Water-Heating Devices
608.7 Vacuum Relief Valves
609.0 Installation, Testing, Unions,
\n and Location
609.1 Installation
609.2 Trenches
609.3 Under Concrete Slab
609.4 Testing
609.5 Unions <\/td>\n<\/tr>\n
143<\/td>\n609.6 Location
609.7 Abutting Lot
609.8 Low-Pressure Cutoff Required
\n on Booster Pumps for Water
\n Distribution Systems
609.9 Disinfection of Potable Water
\n System
609.10 Water Hammer
609.11 Pipe Insulation
610.0 Size of Potable Water Piping
610.1 Size
610.2 Pressure Loss <\/td>\n<\/tr>\n
144<\/td>\n610.3 Quantity of Water
610.4 Sizing Water Supply and
\n Distribution Systems
610.5 Sizing per Appendices
\n A and C
610.6 Friction and Pressure Loss
610.7 Conditions for Using
\n Table 610.4
610.8 Size of Meter and Building
\n Supply Pipe Using Table 610.4
610.9 Size of Branches
610.10 Sizing for Flushometer Valves
Table 610.10 Flushometer Fixture Units
\n for Water Sizing Using
\n Table 610.3 <\/td>\n<\/tr>\n
145<\/td>\n610.11 Sizing Systems for
\n Flushometer Tanks
610.12 Sizing for Velocity
610.13 Exceptions
611.0 Drinking Water Treatment
\n Units
611.1 Application
611.2 Air Gap Discharge
611.3 Connection Tubing
611.4 Sizing of Residential Softeners
612.0 Residential Fire Sprinkler
\n Systems
612.1 Where Required <\/td>\n<\/tr>\n
146<\/td>\nTable 610.3 Water Supply Fixture Units
\n (WSFU) and Minimum Fixture
\n Branch Pipe Sizes <\/td>\n<\/tr>\n
147<\/td>\nTable 610.4 Fixture Unit Table for
\n Determining Water Pipe and
\n Meter Sizes <\/td>\n<\/tr>\n
148<\/td>\nTable 611.4 Sizing of Residential Water
\n Softeners
612.2 Types of Systems
612.3 Sprinklers <\/td>\n<\/tr>\n
149<\/td>\nTable 612.3.3.1 Locations Where Intermediate
\n Temperature Sprinklers
\n are Required
612.4 Sprinkler Piping System
612.5 Sprinkler Piping Design <\/td>\n<\/tr>\n
150<\/td>\nTable 612.3.6 Minimum Separation From
\n Obstruction <\/td>\n<\/tr>\n
152<\/td>\nTable 612.5.3.2(1) Water Service Pressure
\n Loss (PLws <\/td>\n<\/tr>\n
153<\/td>\nTable 612.5.3.2(2) Minimum Water Meter
\n Pressure Loss (PLm
612.6 Instructions and Signs
612.7 Inspection and Testing
Table 612.5.3.2(3) Elevation Loss (PLe <\/td>\n<\/tr>\n
154<\/td>\nTable 612.5.3.2(4) Allowable Pipe Length for
\n 3\/4 Inch Type M Copper
\n Water Tubing <\/td>\n<\/tr>\n
155<\/td>\nTable 612.5.3.2(5) Allowable Pipe Length for
\n 1 Inch Type M Copper
\n Water Tubing <\/td>\n<\/tr>\n
156<\/td>\nTable 612.5.3.2(6) Allowable Pipe Length for
\n 3\/4 Inch IPS CPVC Pipe <\/td>\n<\/tr>\n
157<\/td>\nTable 612.5.3.2(7) Allowable Pipe Length for
\n 1 Inch IPS CPVC Pipe <\/td>\n<\/tr>\n
158<\/td>\nTable 612.5.3.2(8) Allowable Pipe Length for
\n 3\/4 Inch PEX Tubing <\/td>\n<\/tr>\n
159<\/td>\nTable 612.5.3.2(9) Allowable Pipe Length for
\n 1 Inch PEX Tubing <\/td>\n<\/tr>\n
160<\/td>\nCHAPTER 7 SANITARY DRAINAGE
PART I Drainage Systems
701.0 General
701.1 Applicability
701.2 Drainage Piping
701.3 Drainage Fittings
701.4 Continuous Wastes
701.5 Lead
701.6 Caulking Ferrules
701.7 Soldering Bushings
Table 701.6 Caulking Ferrules
Table 701.7 Soldering Bushings
702.0 Fixture Unit Equivalents
702.1 Trap Size
702.2 Intermittent Flow <\/td>\n<\/tr>\n
161<\/td>\nTable 701.2 Materials for Drain, Waste,
\n Vent Pipe and Fittings <\/td>\n<\/tr>\n
162<\/td>\nTable 702.1 Drainage Fixture Unit
\n Values (DFU <\/td>\n<\/tr>\n
163<\/td>\n702.3 Continuous Flow
Table 702.2(1) Maximum Drainage Fixture
\n Units for a Trap and Trap Arm
Table 702.2(2) Discharge Capacity in Gallons
\n Per Minute for Intermittent
\n Flow Only
703.0 Size of Drainage Piping
703.1 Minimum Size
703.2 Maximum Number of Fixture
\n Units
703.3 Sizing per Appendix C
704.0 Fixture Connections (Drainage
704.1 Inlet Fittings
704.2 Single Vertical Drainage Pipe
704.3 Commercial Sinks
705.0 Joints and Connections
705.1 ABS and ABS Co-Extruded
\n Plastic Pipe and Joints
705.2 Cast-Iron Pipe and Joints <\/td>\n<\/tr>\n
164<\/td>\nTable 703.2 Maximum Unit Loading and
\n Maximum Length of Drainage
\n and Vent Piping
705.3 Copper or Copper Alloy Pipe
\n (DWV) and Joints <\/td>\n<\/tr>\n
165<\/td>\n705.4 Galvanized Steel Pipe
\n and Joints
705.5 Polyethylene (PE) Sewer Pipe
705.6 PVC and PVC Co-Extruded
\n Plastic Pipe and Joining
\n Methods
705.7 Stainless Steel Pipe and Joints <\/td>\n<\/tr>\n
166<\/td>\n705.8 Vitrified Clay Pipe and Joints
705.9 Special Joints
705.10 Joints Between Various
\n Materials
706.0 Changes in Direction of
\n Drainage Flow
706.1 Approved Fittings
706.2 Horizontal to Vertical
706.3 Horizontal to Horizontal
706.4 Vertical to Horizontal
707.0 Cleanouts
707.1 Plug <\/td>\n<\/tr>\n
167<\/td>\nTable 707.1 Cleanouts
707.2 Approved
707.3 Watertight and Gastight
707.4 Location
707.5 Cleaning
707.6 Extension
707.7 Interceptor
707.8 Access
707.9 Clearance
707.10 Fittings
707.11 Pressure Drainage Systems
707.12 Countersunk Cleanout Plugs
707.13 Hubless Blind Plugs
707.14 Trap Arms
708.0 Grade of Horizontal Drainage
\n Piping
708.1 General
709.0 Gravity Drainage Required
709.1 General
710.0 Drainage of Fixtures Located
\n Below the Next Upstream
\n Manhole or Below the Main
\n Sewer Level
710.1 Backflow Protection <\/td>\n<\/tr>\n
168<\/td>\n710.2 Sewage Discharge
710.3 Sewage Ejector and Pumps
710.4 Discharge Line
710.5 Size of Building Drains and
\n Sewers
710.6 Backwater Valves
710.7 Drainage and Venting Systems
710.8 Sump and Receiving Tank
\n Construction
710.9 Alarm
710.10 Sump and Receiving Tank
\n Covers and Vents
710.11 Air Tanks
710.12 Grinder Pump Ejector <\/td>\n<\/tr>\n
169<\/td>\n710.13 Macerating Toilet Systems
\n and Pumped Waste Systems
711.0 Suds Relief
711.1 General
712.0 Testing
712.1 Media
712.2 Water Test
712.3 Air Test
PART II Building Sewers
713.0 Sewer Required
713.1 Where Required
713.2 Private Sewage Disposal
\n System
713.3 Public Sewer
713.4 Public Sewer Availability
713.5 Permit
713.6 Lot <\/td>\n<\/tr>\n
170<\/td>\n713.7 Installation
714.0 Damage to Public Sewer or
\n Private Sewage Disposal
\n System
714.1 Unlawful Practices
714.2 Prohibited Water Discharge
714.3 Prohibited Sewer Connection
714.4 Commercial Food Waste
\n Disposer
714.5 Tanks
715.0 Building Sewer Materials
715.1 Materials
715.2 Joining Methods and Materials
715.3 Existing Sewers
716.0 Markings
716.1 General
717.0 Size of Building Sewers
717.1 General
Table 717.1 Maximum\/Minimum Fixture
\n Unit Loading on Building
\n Sewer Piping
718.0 Grade, Support, and
\n Protection of Building Sewers
718.1 Slope
718.2 Support <\/td>\n<\/tr>\n
171<\/td>\n718.3 Protection from Damage
719.0 Cleanouts
719.1 Locations
719.2 No Additional Cleanouts
719.3 Building Sewer Cleanouts
719.4 Cleaning
719.5 Access
719.6 Manholes
720.0 Sewer and Water Pipes
720.1 General
721.0 Location
721.1 Building Sewer
Table 721.1 Minimum Horizontal Distance
\n Required from Building Sewer
721.2 Abutting Lot <\/td>\n<\/tr>\n
172<\/td>\n722.0 Abandoned Sewers and
\n Sewage Disposal Facilities
722.1 Building (House) Sewer
722.2 Cesspools, Septic Tanks,
\n and Seepage Pits
722.3 Filling
722.4 Ownership
722.5 Disposal Facilities
723.0 Building Sewer Test
723.1 General <\/td>\n<\/tr>\n
174<\/td>\nCHAPTER 8 INDIRECT WASTES
801.0 General
801.1 Applicability
801.2 Air Gap or Air Break Required
801.3 Food and Beverage Handling
\n Establishments
801.4 Bar and Fountain Sink Traps
801.5 Connections from Water
\n Distribution System
801.6 Sterilizers
801.7 Drip or Drainage Outlets
802.0 Approvals
802.1 General
803.0 Indirect Waste Piping
803.1 Materials
803.2 Copper and Copper Alloys
803.3 Pipe Size and Length <\/td>\n<\/tr>\n
175<\/td>\n804.0 Indirect Waste Receptors
804.1 Standpipe Receptors
805.0 Pressure Drainage
\n Connections
805.1 General
806.0 Sterile Equipment
806.1 General
807.0 Appliances
807.1 Non-Classed Apparatus
807.2 Undiluted Condensate Waste
807.3 Domestic Dishwashing
\n Machine
808.0 Cooling Water
808.1 General
809.0 Drinking Fountains
809.1 General
810.0 Steam and Hot Water Drainage
\n Condensers and Sumps
810.1 High-Temperature Discharge <\/td>\n<\/tr>\n
176<\/td>\nTable 810.1 Pipe Connections in Blowoff
\n Condensers and Sumps
810.2 Sumps, Condensers, and
\n Intercepting Tanks
810.3 Cleaning
810.4 Strainers
811.0 Chemical Wastes
811.1 Pretreatment
811.2 Waste and Vent Pipes
811.3 Joining Materials
811.4 Access
811.5 Permanent Record
811.6 Chemical Vent
811.7 Discharge
811.8 Diluted Chemicals
812.0 Clear Water Wastes
812.1 General
813.0 Swimming Pools
813.1 General
814.0 Condensate Waste and Control
814.1 Condensate Disposal <\/td>\n<\/tr>\n
177<\/td>\n814.2 Condensate Control
814.3 Condensate Waste Pipe
\n Material and Sizing
Table 814.3 Minimum Condensate
\n Pipe Size
814.4 Appliance Condensate Drains
814.5 Point of Discharge
814.6 Condensate Waste From
\n Air-Conditioning Coils
814.7 Plastic Fittings <\/td>\n<\/tr>\n
178<\/td>\nCHAPTER 9 VENTS
901.0 General
901.1 Applicability
901.2 Vents Required
901.3 Trap Seal Protection
902.0 Vents Not Required
902.1 Interceptor
902.2 Bars, Soda Fountains, and
\n Counter
903.0 Materials
903.1 Applicable Standards
903.2 Use of Copper or Copper
\n Alloy Tubing
903.3 Changes in Direction
904.0 Size of Vents
904.1 Size
904.2 Length
905.0 Vent Pipe Grades and
\n Connections
905.1 Grade <\/td>\n<\/tr>\n
179<\/td>\n905.2 Horizontal Drainage Pipe
905.3 Vent Pipe Rise
905.4 Roof Termination
905.5 Location of Opening
905.6 Common Vertical Pipe
906.0 Vent Termination
906.1 Roof Termination
906.2 Clearance
906.3 Use of Roof
906.4 Outdoor Installations
906.5 Joints
906.6 Lead
906.7 Frost or Snow Closure
907.0 Vent Stacks and Relief Vents
907.1 Drainage Stack
907.2 Yoke Vent
908.0 Wet Venting
908.1 Vertical Wet Venting
908.2 Horizontal Wet Venting for a
\n Bathroom Group <\/td>\n<\/tr>\n
180<\/td>\n909.0 Special Venting for Island
\n Fixtures
909.1 General
910.0 Combination Waste and Vent
\n Systems
910.1 Where Permitted
910.2 Approval
910.3 Vents
910.4 Size
910.5 Vertical Waste Pipe
910.6 Cleanouts
910.7 Fixtures
911.0 Circuit Venting
911.1 Circuit Vent Permitted <\/td>\n<\/tr>\n
181<\/td>\n911.2 Vent Size and Connection
911.3 Slope and Size of Horizontal
\n Branch
911.4 Relief Vent
911.5 Additional Fixtures
912.0 Engineered Vent System
912.1 General
912.2 Minimum Requirements <\/td>\n<\/tr>\n
182<\/td>\nCHAPTER 10 TRAPS AND
\n INTERCEPTORS
1001.0 General
1001.1 Applicability
1001.2 Where Required
1002.0 Traps Protected by Vent Pipes
1002.1 Vent Pipes
1002.2 Fixture Traps
Table 1002.2 Horizontal Lengths of Trap
\n Arms
1002.3 Change of Direction
1002.4 Vent Pipe Opening
1003.0 Traps \u2014 Described
1003.1 General Requirements
1003.2 Slip Joint Fittings
1003.3 Size
1004.0 Traps
1004.1 Prohibited
1004.2 Movable Parts <\/td>\n<\/tr>\n
183<\/td>\n1005.0 Trap Seals
1005.1 General
1006.0 Floor Drain Traps
1006.1 General
1007.0 Trap Seal Protection
1007.1 General
1007.2 Trap Seal Primers
1008.0 Building Traps
1008.1 General
1009.0 Interceptors (Clarifiers) and
\n Separators
1009.1 Where Required
1009.2 Approval
1009.3 Design
1009.4 Relief Vent
1009.5 Location
1009.6 Maintenance of Interceptors
1009.7 Discharge
1010.0 Slaughterhouses, Packing
\n Establishments, etc
1010.1 General
1011.0 Minimum Requirements for
\n Auto Wash Racks
1011.1 General
1012.0 Commercial and Industrial
\n Laundries
1012.1 General
1013.0 Bottling Establishments
1013.1 General
1014.0 Grease Interceptors
1014.1 General <\/td>\n<\/tr>\n
184<\/td>\n1014.2 Hydromechanical Grease
\n Interceptors
Table 1014.2.1 Hydromechanical Grease
\n Interceptor Sizing Using
\n Gravity Flow Rates <\/td>\n<\/tr>\n
185<\/td>\n1014.3 Gravity Grease Interceptors
Table 1014.3.6 Gravity Grease Interceptor
\n Sizing <\/td>\n<\/tr>\n
186<\/td>\n1015.0 FOG (Fats, Oils, and Greases)
\n Disposal System
1015.1 Purpose
1015.2 Components, Materials, and
\n Equipment
1015.3 Sizing and Installation
1015.4 Performance
1016.0 Sand Interceptors
1016.1 Discharge
1016.2 Authority Having Jurisdiction
1016.3 Construction and Size
1016.4 Separate Use
1017.0 Oil and Flammable Liquid
\n Interceptors
1017.1 Interceptors Required
1017.2 Design of Interceptors <\/td>\n<\/tr>\n
188<\/td>\nCHAPTER 11 STORM DRAINAGE
1101.0 General
1101.1 Applicability
1101.2 Where Required
1101.3 Storm Water Drainage to
\n Sanitary Sewer Prohibited
1101.4 Material Uses
Table 1101.4.6 Materials for Subsoil Drain
\n Pipe and Fittings
1101.5 Expansion Joints Required
1101.6 Subsoil Drains <\/td>\n<\/tr>\n
189<\/td>\n1101.7 Building Subdrains
1101.8 Areaway Drains
1101.9 Window Areaway Drains
1101.10 Filling Stations and Motor
\n Vehicle Washing
\n Establishments
1101.11 Paved Areas
1101.12 Roof Drainage <\/td>\n<\/tr>\n
190<\/td>\n1101.13 Cleanouts
1101.14 Rainwater Sumps
1101.15 Traps on Storm Drains and
\n Leaders
1101.16 Leaders, Conductors, and
\n Connections
1102.0 Roof Drains
1102.1 Applications
1102.2 Dome Strainers Required
1102.3 Roof Drain Flashings
1103.0 Size of Leaders, Conductors,
\n and Storm Drains
1103.1 Vertical Conductors and
\n Leaders
1103.2 Size of Horizontal Storm Drains
\n and Sewers
1103.3 Size of Roof Gutters
1103.4 Side Walls Draining onto a Roof <\/td>\n<\/tr>\n
191<\/td>\n1104.0 Values for Continuous Flow
1104.1 General
1105.0 Controlled-Flow Roof
\n Drainage
1105.1 Application
Table 1105.1(1) Controlled-Flow Maximum
\n Roof Water Depth
Table 1105.1(2) Distance of Scupper Bottoms
\n Above Roof
1105.2 Setback Roofs
1106.0 Engineered Storm Drainage
\n System
1106.1 General <\/td>\n<\/tr>\n
192<\/td>\n1106.2 Siphonic Roof Drainage
\n Systems
1106.3 Siphonic Roof Drains
1107.0 Testing
1107.1 Testing Required
1107.2 Methods of Testing Storm
\n Drainage Systems <\/td>\n<\/tr>\n
193<\/td>\nTable 1103.1 Sizing Roof Drains, Leaders,
\n and Vertical Rainwater Piping <\/td>\n<\/tr>\n
194<\/td>\nTable 1103.2 Sizing of Horizontal
\n Rainwater Piping <\/td>\n<\/tr>\n
195<\/td>\nTable 1103.3 Size of Gutters <\/td>\n<\/tr>\n
196<\/td>\nCHAPTER 12 FUEL GAS PIPING
1201.0 General
1201.1 Applicability
1202.0 Coverage of Piping System
1202.1 General
1202.2 Piping System Requirements
1202.3 Applications
1203.0 Inspection
1203.1 Inspection Notification
1203.2 Excavation
1203.3 Type of Inspections <\/td>\n<\/tr>\n
197<\/td>\n1203.4 Inspection Waived
1204.0 Certificate of Inspection
1204.1 Issuance
1204.2 Gas Supplier
1204.3 Unlawful
1205.0 Authority to Render Gas
\n Service
1205.1 Authorized Personnel
1205.2 Outlets
1206.0 Authority to Disconnect
1206.1 Disconnection
1206.2 Notice
1206.3 Capped Outlets
1207.0 Temporary Use of Gas
1207.1 General
1208.0 Gas Piping System Design,
\n Materials, and Components
1208.1 Installation of Piping System
1208.2 Provision for Location of
\n Point of Delivery
1208.3 Interconnections Between
\n Gas Piping Systems
1208.4 Sizing of Gas Piping Systems <\/td>\n<\/tr>\n
198<\/td>\nTable 1208.4.1 Approximate Gas Input for
\n Typical Appliances
1208.5 Maximum Design Operating
\n Pressure
1208.6 Acceptable Piping Materials
\n and Joining Methods <\/td>\n<\/tr>\n
200<\/td>\nTable 1208.6.10.2 Specifications for Threading
\n Metallic Pipe <\/td>\n<\/tr>\n
201<\/td>\n1208.7 Gas Meters
1208.8 Gas Pressure Regulators <\/td>\n<\/tr>\n
202<\/td>\n1208.9 Overpressure Protection
\n Devices
1208.10 Pressure Limitation
\n Requirements
1208.11 Backpressure Protection <\/td>\n<\/tr>\n
203<\/td>\n1208.12 Low-Pressure Protection
1208.13 Shutoff Valves
1208.14 Expansion and Flexibility
1209.0 Excess Flow Valve
1209.1 General
1210.0 Gas Piping Installation
1210.1 Piping Underground <\/td>\n<\/tr>\n
204<\/td>\n1210.2 Installation of Piping <\/td>\n<\/tr>\n
205<\/td>\nTable 1210.2.4.1 Support of Piping
1210.3 Concealed Piping in Buildings <\/td>\n<\/tr>\n
206<\/td>\n1210.4 Piping in Vertical Chases
1210.5 Gas Pipe Turns
1210.6 Drips and Sediment Traps
1210.7 Outlets <\/td>\n<\/tr>\n
207<\/td>\n1210.8 Branch Pipe Connection
1210.9 Manual Gas Shutoff Valves
1210.10 Prohibited Devices
1210.11 Systems Containing Gas-Air
\n Mixtures Outside the
\n Flammable Range
1210.12 Systems Containing Flammable
\n Gas-Air Mixtures <\/td>\n<\/tr>\n
208<\/td>\n1211.0 Electrical Bonding and
\n Grounding
1211.1 Pipe and Tubing other than
\n CSST
1211.2 Bonding of CSST Gas Piping <\/td>\n<\/tr>\n
209<\/td>\n1211.3 Prohibited Use
1211.4 Lightning Protection System
1211.5 Electrical Circuits
1211.6 Electrical Connections
1212.0 Appliance and Equipment
\n Connections to Building Piping
1212.1 Connecting Appliances and
\n Equipment
1212.2 Suspended Low-Intensity
\n Infrared Tube Heaters
1212.3 Use of Nonmetallic Gas
\n Hose Connectors
1212.4 Injection (Bunsen) Burners
1212.5 Connection of Portable
\n and Mobile Industrial
\n Gas Appliances <\/td>\n<\/tr>\n
210<\/td>\n1212.6 Appliance Shutoff Valves
\n and Connections
1212.7 Quick-Disconnect Devices
1212.8 Gas Convenience Outlets
1212.9 Sediment Trap
1212.10 Installation of Piping
1212.11 Liquefied Petroleum Gas
\n Facilities and Piping
1213.0 Pressure Testing, Inspection,
\n and Purging
1213.1 Piping Installations <\/td>\n<\/tr>\n
211<\/td>\n1213.2 Test Preparation
1213.3 Test Pressure
1213.4 Detection of Leaks and Defects
1213.5 Piping System Leak Test
1213.6 Purging Requirements <\/td>\n<\/tr>\n
212<\/td>\nTable 1213.6.1 Size and Length of Piping <\/td>\n<\/tr>\n
213<\/td>\n1214.0 Required Gas Supply
1214.1 General
1214.2 Volume
1214.3 Gas Appliances
1214.4 Size of Piping Outlets
1215.0 Required Gas Piping Size
1215.1 Pipe Sizing Methods
1215.2 Tables for Sizing Gas Piping
\n Systems
1215.3 Sizing Equations <\/td>\n<\/tr>\n
214<\/td>\nTable 1215.3 Cr and Y for Natural Gas and
\n Undiluted Propane at Standard
\n Conditions
1215.4 Sizing of Piping Sections
1215.5 Engineering Methods
1215.6 Variable Gas Pressure <\/td>\n<\/tr>\n
216<\/td>\nTable 1215.2(1) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
217<\/td>\nTable 1215.2(2) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
218<\/td>\nTable 1215.2(3) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
219<\/td>\nTable 1215.2(4) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
220<\/td>\nTable 1215.2(5) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
221<\/td>\nTable 1215.2(6) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
222<\/td>\nTable 1215.2(7) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
223<\/td>\nTable 1215.2(8) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
224<\/td>\nTable 1215.2(9) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
225<\/td>\nTable 1215.2(10) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
226<\/td>\nTable 1215.2(11) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
227<\/td>\nTable 1215.2(12) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
228<\/td>\nTable 1215.2(13) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
229<\/td>\nTable 1215.2(14) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
230<\/td>\nTable 1215.2(15) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
231<\/td>\nTable 1215.2(16) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
232<\/td>\nTable 1215.2(17) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
233<\/td>\nTable 1215.2(18) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
234<\/td>\nTable 1215.2(19) Polyethylene Plastic Pipe <\/td>\n<\/tr>\n
235<\/td>\nTable 1215.2(20) Polyethylene Plastic Pipe <\/td>\n<\/tr>\n
236<\/td>\nTable 1215.2(21) Polyethylene Plastic Pipe <\/td>\n<\/tr>\n
237<\/td>\nTable 1215.2(22) Polyethylene Plastic Tubing
Table 1215.2(23) Polyethylene Plastic Tubing <\/td>\n<\/tr>\n
238<\/td>\nTable 1215.2(24) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
239<\/td>\nTable 1215.2(25) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
240<\/td>\nTable 1215.2(26) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
241<\/td>\nTable 1215.2(27) Schedule 40 Metallic Pipe <\/td>\n<\/tr>\n
242<\/td>\nTable 1215.2(28) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
243<\/td>\nTable 1215.2(29) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
244<\/td>\nTable 1215.2(30) Semi-Rigid Copper Tubing <\/td>\n<\/tr>\n
245<\/td>\nTable 1215.2(31) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
246<\/td>\nTable 1215.2(32) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
247<\/td>\nTable 1215.2(33) Corrugated Stainless Steel
\n Tubing (CSST <\/td>\n<\/tr>\n
248<\/td>\nTable 1215.2(34) Polyethylene Plastic Pipe <\/td>\n<\/tr>\n
249<\/td>\nTable 1215.2(35) Polyethylene Plastic Pipe <\/td>\n<\/tr>\n
250<\/td>\nTable 1215.2(36) Polyethylene Plastic Tubing <\/td>\n<\/tr>\n
252<\/td>\nCHAPTER 13 HEALTH CARE FACILITIES AND
\n MEDICAL GAS AND MEDICAL
\n VACUUM SYSTEMS
PART I General Requirements
1301.0 General
1301.1 Applicability
1301.2 Where Not Applicable
1301.3 Conflict of Requirements
1301.4 Terms
1301.5 Where Required
1301.6 Existing Systems
1302.0 Design Requirements
1302.1 Building System Risk
\n Categories
1302.2 Patient Care Spaces
1302.3 Anesthesia
1302.4 Wet Procedure Locations
1303.0 Health Care Facilities
1303.1 Drinking Fountain Control
\n Valves
1303.2 Psychiatric Patient Rooms
1303.3 Locations for Ice Storage
1303.4 Sterilizers and Bedpan
\n Steamers <\/td>\n<\/tr>\n
253<\/td>\n1303.5 Aspirators
1303.6 Drains
1303.7 Clinical Sinks
1303.8 Water Supply for Hospitals
1304.0 Medical Gas and Medical
\n Vacuum Piping Systems
1304.1 General
1304.2 Manufacturer\u2019s Instructions
1304.3 Category 2 Piped Medical
\n Gas and Medical Vacuum
1304.4 Category 3 Piped Medical
\n Gas and Medical Vacuum
1304.5 Certification of Systems
1304.6 Construction Documents
1305.0 System Performance
1305.1 Required Operating Pressures
1305.2 Minimum Flow Rates <\/td>\n<\/tr>\n
254<\/td>\n1305.3 Minimum Station Outlets
\n and Inlets
Table 1305.1 Standard Designation Colors
\n and Operating Pressures for
\n Gas and Vacuum Systems
1306.0 Qualifications of Installers
1306.1 General
Table 1305.2 Minimum Flow Rates
1306.2 Brazing
1306.3 Health Care Organization
\n Personnel
1307.0 Brazing Procedures
1307.1 General
1307.2 Examination
1307.3 Brazing Procedure Specification
1307.4 Documentation <\/td>\n<\/tr>\n
255<\/td>\nTable 1305.3 Minimum Outlets and Inlets
\n Per Station
1307.5 Procedures
1307.6 Conditions of Acceptance
1307.7 Qualifications
PART II Medical Gas and
\n Vacuum System Piping
1308.0 Pipe Materials
1308.1 General
1308.2 Cleaning
1308.3 Delivery
1308.4 Tubes for Medical Gas
\n Systems <\/td>\n<\/tr>\n
256<\/td>\n1308.5 Tubes for Medical Vacuum
\n Systems
1308.6 Category 3 Systems
1309.0 Joints and Connections
1309.1 General
1309.2 Changes in Direction
1309.3 Medical Vacuum Systems
1309.4 Brazed Joints and Fittings
1309.5 Tube Ends <\/td>\n<\/tr>\n
257<\/td>\n1309.6 Cleaning Procedures
1309.7 Brazing Dissimilar Metals
1309.8 Nitrogen Purge <\/td>\n<\/tr>\n
258<\/td>\n1309.9 Assembling and Heating
\n Brazed Joints
1309.10 Inspection of Brazed Joints
1309.11 Memory Metal Fittings
1309.12 Axially Swaged Fittings
1309.13 Threaded Fittings <\/td>\n<\/tr>\n
259<\/td>\n1309.14 Dielectric Fittings
1309.15 Other Types of Fittings
1309.16 Welded Joints
1309.17 Welding for Stainless Tube
1309.18 Prohibited Joints
1310.0 Installation of Piping
1310.1 General
1310.2 Required Pipe Sizing <\/td>\n<\/tr>\n
260<\/td>\nTable 1310.2.1(1) System Sizing \u2013 Flow
\n Requirements for Station
\n Outlets and Inlets
Table 1310.2.2(1) Maximum Permitted Pressure
\n Loss in Medical Gas and
\n Medical Vacuum Systems
1310.3 Pipe Protection
1310.4 Location of Piping
1310.5 Pipe Support <\/td>\n<\/tr>\n
261<\/td>\nTable 1310.5.4(1) Maximum Pipe Support
\n Spacing
Table 1310.5.4(2) Maximum Plastic Pipe Support
\n Spacing
1310.6 Backfilling and Trenching
1310.7 Connectors <\/td>\n<\/tr>\n
262<\/td>\nTable 1310.2.1(2) Pressure Loss for Medical Air
Table 1310.2.1(3) Pressure Loss for Nitrogen <\/td>\n<\/tr>\n
263<\/td>\nTable 1310.2.1(4) Pressure Loss for Nitrous
\n Oxide and Carbon Dioxide
Table 1310.2.1(5) Pressure Loss for Oxygen <\/td>\n<\/tr>\n
264<\/td>\nTable 1310.2.1(6) Pressure Loss for Vacuum
Table 1310.2.1(7) Pressure Loss for Vacuum
\n (Category 3 <\/td>\n<\/tr>\n
265<\/td>\n1310.8 Prohibited System
\n Interconnections
1310.9 Changes in System Use
1310.10 Breaching or Penetrating
\n Medical Gas Piping
1310.11 Labeling, Identification and
\n Operating Pressure
1311.0 Valves
1311.1 General <\/td>\n<\/tr>\n
266<\/td>\n1311.2 Source Valves
1311.3 Main Line Valve
1311.4 Riser Valves
1311.5 Service Valves
1311.6 Zone Valves
1311.7 In-Line Shutoff Valves
1311.8 Emergency Shutoff Valves <\/td>\n<\/tr>\n
267<\/td>\n1311.9 Valves for Future Connections
1311.10 Identification of Shutoff Valves
PART III Systems, Equipment,
\n and Components
1312.0 Central Supply Systems
1312.1 Permitted Locations for
\n Medical Gas
1312.2 Materials
1312.3 Pressure-Relief Valve
\n Requirements <\/td>\n<\/tr>\n
268<\/td>\n1313.0 Medical Air Supply Systems
1313.1 Quality of Medical Air
1313.2 Medical Air Compressors
1313.3 Category 2 Medical Air
\n Supply Systems
1313.4 Category 3 Systems
1313.5 Air Sources <\/td>\n<\/tr>\n
269<\/td>\n1313.6 Air Intakes
1313.7 Medical Air Receivers
1314.0 Medical Vacuum System
1314.1 General
1314.2 Medical-Surgical Vacuum
\n Sources <\/td>\n<\/tr>\n
270<\/td>\n1314.3 Vacuum Pumps
1314.4 Vacuum Receivers
1314.5 Vacuum Source Exhausts
1315.0 Pressure-Regulating Equipment
1315.1 Where Required
1315.2 Pressure Relief Valves
1315.3 Pressure and Vacuum
\n Indicator Locations <\/td>\n<\/tr>\n
271<\/td>\n1316.0 Station Outlets and Inlets
1316.1 General
1316.2 Required Valves
1316.3 Post Installation
1316.4 Identification
1317.0 Warning Systems
1317.1 Category 1
1317.2 Category 2 Systems <\/td>\n<\/tr>\n
272<\/td>\n1317.3 Category 3 Systems
1317.4 Components
PART IV Testing, Inspection, and
\n Certification
1318.0 Testing and Inspection
1318.1 Where Required
1318.2 Breached Systems
1318.3 Reports
1318.4 Initial Piping Blowdown
1318.5 Initial Pressure Tests \u2013
\n Medical Gas and Vacuum
\n Systems
1318.6 Initial Pressure Test –
\n Category 3 Copper Piping
\n Systems <\/td>\n<\/tr>\n
273<\/td>\nPlastic Vacuum Piping Systems
1318.8 Cross-Connection Tests \u2013
\n Medical Gas and Vacuum
\n Systems <\/td>\n<\/tr>\n
274<\/td>\n1318.9 Standing Pressure Tests \u2013 for
\n Positive Pressure Medical
\n Gas Piping Systems
1318.10 Standing Pressure Tests \u2013
\n Medical Vacuum Piping
\n Systems
1318.11 Standing Pressure Tests \u2013 for
\n Category 3 Gas Powered
\n Device Distribution Piping
1318.12 Medical Gas Piping System
\n Purge Tests
1318.13 Category 3 Dental Air and
\n Nitrogen Supply Systems
\n Purge Tests <\/td>\n<\/tr>\n
275<\/td>\n1318.14 Operational Pressure Test
1318.15 Medical Gas Concentration Test
Table 1318.15 Gas Concentrations
1318.16 System Verification
1319.0 System Certification
1319.1 Certification
1319.2 Certification Tests
1319.3 Report Items <\/td>\n<\/tr>\n
276<\/td>\nCHAPTER 14 FIRESTOP PROTECTION
1401.0 General
1401.1 Applicability
1402.0 Construction Documents
1402.1 Penetrations
1403.0 Installation
1403.1 Materials
1404.0 Combustible Piping
\n Installations
1404.1 General Requirements
1404.2 Fire-Resistance Rating
1404.3 Firestop Systems
1404.4 Connections
1404.5 Insulation and Coverings
1404.6 Sleeves
1405.0 Noncombustible Piping
\n Installations
1405.1 General Requirements
1405.2 Fire-Resistance Rating
1405.3 Firestop Systems
1405.4 Connections <\/td>\n<\/tr>\n
277<\/td>\n1405.5 Unshielded Couplings
1405.6 Sleeves
1405.7 Insulation and Coverings
1406.0 Required Inspection
1406.1 General
1406.2 Examination
1406.3 Penetrations
1406.4 Field Installations <\/td>\n<\/tr>\n
278<\/td>\nCHAPTER 15 ALTERNATE WATER SOURCES
\n FOR NONPOTABLE
\n APPLICATIONS
1501.0 General
1501.1 Applicability
1501.2 System Design
1501.3 Permit
1501.4 Component Identification
1501.5 Maintenance and Inspection
Table 1501.5 Minimum Alternate Water
\n Source Testing, Inspection,
\n and Maintenance Frequency
1501.6 Operation and Maintenance
\n Manual <\/td>\n<\/tr>\n
279<\/td>\n1501.7 Minimum Water Quality
\n Requirements
1501.8 Material Compatibility
1501.9 Commercial, Industrial, and
\n Institutional Restroom Signs
1501.10 System Controls
1502.0 Inspection and Testing
1502.1 General
1502.2 Supply System Inspection
\n and Test
1502.3 Annual Cross-Connection
\n Inspection and Testing <\/td>\n<\/tr>\n
280<\/td>\n1502.4 Separation Requirements
1502.5 Abandonment
1502.6 Sizing
1503.0 Gray Water Systems
1503.1 General
1503.2 System Requirements
1503.3 Connections to Potable and
\n Reclaimed (Recycled) Water
\n Systems <\/td>\n<\/tr>\n
281<\/td>\n1503.4 Location
Table 1503.4 Location of Gray Water System
1503.5 Plot Plan Submission
1503.6 Prohibited Location
1503.7 Drawings and Specifications
1503.8 Procedure for Estimating Gray
\n Water Discharge <\/td>\n<\/tr>\n
282<\/td>\n1503.9 Gray Water System
\n Components
1504.0 Subsurface Irrigation System
\n Zones
1504.1 General
1504.2 Required Area of Subsurface
\n Irrigation Fields, Subsoil
\n Irrigation Fields, and
\n Mulch Basins
1504.3 Determination of Maximum
\n Absorption Capacity <\/td>\n<\/tr>\n
283<\/td>\n1504.4 Groundwater Level
Table 1504.2 Design of Six Typical Soils
1504.5 Subsurface and Subsoil
\n Irrigation Field Design and
\n Construction
Table 1504.5.5 Subsurface Irrigation Design
\n Criteria for Six Typical Soils
1504.6 Mulch Basin Design and
\n Construction <\/td>\n<\/tr>\n
284<\/td>\n1504.7 Subsoil Irrigation Field
Table 1504.7.3 Subsoil Irrigation Field
\n Construction
1504.8 Gray Water System Color
\n and Marking Information
1504.9 Other Collection and
\n Distribution Systems
1504.10 Testing
1504.11 Maintenance
1505.0 Reclaimed (Recycled) Water
\n Systems
1505.1 General
1505.2 Permit
1505.3 System Changes
1505.4 Connections to Potable or
\n Reclaimed (Recycled)
\n Water Systems
1505.5 Initial Cross-Connection Test <\/td>\n<\/tr>\n
285<\/td>\n1505.6 Reclaimed (Recycled)
\n Water System Materials
1505.7 Reclaimed (Recycled) Water
\n System Color and Marking
\n Information
1505.8 Valves
1505.9 Hose Bibbs
1505.10 Required Appurtenances
1505.11 Same Trench as Potable
\n Water Pipes
1505.12 Signs
1505.13 Inspection and Testing
1506.0 On-Site Treated Nonpotable
\n Water Systems
1506.1 General
1506.2 Plumbing Plan Submission
1506.3 System Changes
1506.4 Connections to Potable or
\n Reclaimed (Recycled)
\n Water Systems
1506.5 Initial Cross-Connection Test
1506.6 On-Site Treated Nonpotable
\n Water System Materials
1506.7 On-Site Treated Nonpotable
\n Water Devices and Systems
1506.8 On-Site Treated Nonpotable
\n Water System Color and
\n Marking Information <\/td>\n<\/tr>\n
286<\/td>\n1506.9 Design and Installation
1506.10 Valves
1506.11 Signs
1506.12 Inspection and Testing <\/td>\n<\/tr>\n
288<\/td>\nCHAPTER 16 NONPOTABLE RAINWATER
\n CATCHMENT SYSTEMS
1601.0 General
1601.1 Applicability
1601.2 System Design
1601.3 Permit
1601.4 Component Identification
1601.5 Maintenance and Inspection
Table 1601.5 Minimum Alternate Water
\n Source Testing, Inspection,
\n and Maintenance Frequency <\/td>\n<\/tr>\n
289<\/td>\n1601.6 Operation and Maintenance
\n Manual
1601.7 Minimum Water Quality
\n Requirements
1601.8 Material Compatibility
1601.9 System Controls
1601.10 Separation Requirements
1601.11 Abandonment
1601.12 Sizing
1602.0 Nonpotable Rainwater
\n Catchment Systems
1602.1 General
1602.2 Plumbing Plan Submission
1602.3 System Changes
1602.4 Connections to Potable or
\n Reclaimed (Recycled) Water
\n Systems
1602.5 Initial Cross-Connection Test
1602.6 Sizing
1602.7 Rainwater Catchment System
\n Materials <\/td>\n<\/tr>\n
290<\/td>\n1602.8 Rainwater Catchment System
\n Color and Marking Information
1602.9 Design and Installation
1603.0 Rainwater Storage Tanks
1603.1 General
1603.2 Construction
1603.3 Location
1603.4 Above Grade
1603.5 Below Grade
1603.6 Drainage and Overflow <\/td>\n<\/tr>\n
291<\/td>\nTable 1602.9.6 Minimum Water Quality
1603.7 Opening and Access Protection
1603.8 Marking
1603.9 Storage Tank Venting
1603.10 Pumps
1603.11 Roof Drains
1603.12 Water Quality Devices and
\n Equipment
1603.13 Freeze Protection
1603.14 Debris Removal
1603.15 Required Filters
1603.16 Roof Gutters
1604.0 Signs
1604.1 General
1604.2 Commercial, Industrial, and
\n Institutional Restroom Signs <\/td>\n<\/tr>\n
292<\/td>\n1604.3 Equipment Room Signs
1605.0 Inspection and Testing
1605.1 General
1605.2 Supply System Inspection
\n and Test
1605.3 Annual Cross-Connection
\n Inspection and Testing <\/td>\n<\/tr>\n
294<\/td>\nCHAPTER 17 REFERENCED STANDARDS
1701.0 General
1701.1 Standards
Table 1701.1 Referenced Standards <\/td>\n<\/tr>\n
305<\/td>\n1701.2 Standards, Publications,
\n Practices, and Guides
Table 1701.2 Standards, Publications,
\n Practices, and Guides <\/td>\n<\/tr>\n
312<\/td>\nAPPENDICES <\/td>\n<\/tr>\n
314<\/td>\nAppendix A Recommended Rules for
\n Sizing the Water Supply
\n System <\/td>\n<\/tr>\n
328<\/td>\nAppendix B Explanatory Notes on
\n Combination Waste and Vent
\n Systems <\/td>\n<\/tr>\n
330<\/td>\nAppendix C Alternate Plumbing Systems <\/td>\n<\/tr>\n
338<\/td>\nAppendix D Sizing Storm Water Drainage
\n Systems <\/td>\n<\/tr>\n
346<\/td>\nAppendix E Manufactured\/Mobile Home
\n Parks and Recreational
\n Vehicle Parks <\/td>\n<\/tr>\n
356<\/td>\nAppendix F Firefighter Breathing Air
\n Replenishment Systems <\/td>\n<\/tr>\n
360<\/td>\nAppendix G Sizing of Venting Systems <\/td>\n<\/tr>\n
370<\/td>\nAppendix H Private Sewage Disposal
\n Systems <\/td>\n<\/tr>\n
380<\/td>\nAppendix I Installation Standard
\n for PEX Tubing Systems
\n for Hot- and Cold-Water
\n Distribution <\/td>\n<\/tr>\n
388<\/td>\nAppendix J Combination of Indoor and
\n Outdoor Combustion and
\n Ventilation Opening Design <\/td>\n<\/tr>\n
390<\/td>\nAppendix K Potable Rainwater Catchment
\n Systems <\/td>\n<\/tr>\n
394<\/td>\nAppendix L Sustainable Practices <\/td>\n<\/tr>\n
410<\/td>\nAppendix M Peak Water Demand
\n Calculator <\/td>\n<\/tr>\n
416<\/td>\nINDEX <\/td>\n<\/tr>\n<\/table>\n","protected":false},"excerpt":{"rendered":"

Uniform Plumbing Code, 2nd Printing<\/b><\/p>\n\n\n\n\n
Published By<\/td>\nPublication Date<\/td>\nNumber of Pages<\/td>\n<\/tr>\n
IAPMO<\/b><\/a><\/td>\n2018<\/td>\n442<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n","protected":false},"featured_media":194396,"template":"","meta":{"rank_math_lock_modified_date":false,"ep_exclude_from_search":false},"product_cat":[2685],"product_tag":[],"class_list":{"0":"post-194394","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-iapmo","8":"first","9":"instock","10":"sold-individually","11":"shipping-taxable","12":"purchasable","13":"product-type-simple"},"_links":{"self":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product\/194394","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media\/194396"}],"wp:attachment":[{"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/media?parent=194394"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_cat?post=194394"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/pdfstandards.shop\/wp-json\/wp\/v2\/product_tag?post=194394"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}