BS 5608:1993
$86.31
Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment
| Published By | Publication Date | Number of Pages |
| BSI | 1993 | 12 |
This British Standard specifies the composition, physical properties and dimensional tolerances for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for the thermal insulation of pipework and equipment. It applies to slabs, cut and moulded pipe sections and radiused and bevelled lags. The nominal temperature range f or which the insulation material is suitable is − 180 °C to + 140 °C (see Annex F).
NOTE 1 No values are specified in this standard for the length, bore and outside diameter of pipe sections and lags or for the length and width of slab stock; these should be as specified by the purchaser.
Includes a requirement for the thermal conductivity to be designated by the manufacturer.
Related products
-
BSI PD 6697:2010
Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2…
-
BS 5668-2:1997
Routine analytical cigarette smoking machine – Methods of non-routine evaluation Published By Publication Date Number…
-
BS EN ISO 6508-1:1999
Metallic materials. Rockwell hardness test – Test method (scales A, B, C, D, E, F,…
-
BS ISO 5658-2:1996:1997 Edition
Reaction to fire tests. Spread of flame – Lateral spread on building products in vertical…
-
BS 5908:1990
Code of practice for fire precautions in the chemical and allied industries Published By Publication…
-
BS EN 1052-1:1999
Methods of test for masonry – Determination of compressive strength Published By Publication Date Number…
-
BS 5600-3.11.1:1991
Powder metallurgical materials and products. Methods of testing sintered metal material and products, excluding hard…
-
BS EN 60317-39:1995:2006 Edition
Specifications for particular types of winding wire – Glass-fibre braided, resin or varnish impregnated, bare…
-
BSI PP 7312:2002
Structural design. Extracts from British Standards for students of structural design Published By Publication Date…
-
BS 5606:1990
Guide to accuracy in building Published By Publication Date Number of Pages BSI 1990 56
-
BS EN 24491-2:1993
Metallic powders. Determination of oxygen content by reduction methods – Loss of mass on hydrogen…
-
BS 3790:1995
Specification for endless wedge belt drives and endless V-belt drives Published By Publication Date Number…
-
BS 5808:1991:2005 Edition
Specification for underlays for textile floor coverings Published By Publication Date Number of Pages BSI…
-
BS EN ISO 4608:1998
Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption…
-
BS 2782-4 Method 454E:1992
Methods of testing plastics. Chemical properties – Determination of plasticizer absorption at room temperature of…
-
BS EN 24498-1:1993
Sintered metal materials, exluding hardmetals. Determination of apparent hardness. – Materials of essentially uniform section…
-
BS 5608:1986
Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework…
-
BS EN 10109-2:1996
Metallic materials. Hardness test – Verification of Rockwell hardness testing machines (scales A, B, C,…
-
BS 5234-2:1992
Partitions (including matching linings) – Specification for performance requirements for strength and robustness including methods…
-
BS EN 1608:1997
Thermal insulating products for building applications. Determination of tensile strength parallel to faces Published By…
-
BS 4193-18:1997
Hardmetal insert tooling – Specification for dimensions of boring bars for indexable inserts Published By…
-
BS EN 568:1993
Mountaineering equipment. Ice anchors. Safety requirements and test method Published By Publication Date Number of…
-
BS 5668-2:1983
Routine analytical cigarette smoking machine – Methods of non-routine evaluation Published By Publication Date Number…
-
BS 7853:1996
Mechanical vibration. Road surface profiles. Reporting of measured data Published By Publication Date Number of…
-
BSI PD 6697:2019
Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2…
-
BS EN 24869-1:1993:1991 Edition
Acoustics. Hearing protectors – Sound attenuation of hearing protectors. Subjective method of measurement Published By…
-
BS 5628-1:2005:2009 Edition
Code of practice for the use of masonry – Structural use of unreinforced masonry Published…
-
BS EN 10109-1:1996
Metallic materials. Hardness test – Rockwell test (scales A, B, C, D, E, F, G,…
-
BS EN 560:1995
Gas welding equipment. Hose connections for welding, cutting and allied processes Published By Publication Date…
-
BS 5605:1990
Recommendations for citing and referencing published material Published By Publication Date Number of Pages BSI…
-
BS 5668-1:1992
Routine analytical cigarette smoking machine – Specification and standard conditions Published By Publication Date Number…
-
BS 7608:1993:1995 Edition
Code of practice for fatigue design and assessment of steel structures Published By Publication Date…
-
BS EN ISO 6508-2:1999
Metallic materials. Rockwell hardness test – Verification and calibration of testing machines (scales A, B,…
-
BS 5108:1983
Method for measurement of sound attenuation of hearing protectors Published By Publication Date Number of…
-
BS 7424:1991
Guide to general principles for determination of the bending stiffness of paper and board by…
-
BS EN ISO 6508-3:1999
Metallic materials. Rockwell hardness test – Calibration of reference blocks (scales A, B, C, D,…
-
BS 5628-1:1992:2002 Edition
Code of practice for use of masonry – Structural use of unreinforced masonry Published By…
-
BS 5600-4-4.6:1987
Powder metallurgical materials and products. Methods of testing and chemical analysis of hardmetals – Vickers…
-
BS 2L 508:1973
Specification for bars and extruded sections of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas…
-
BS 5293-2:1996
Sampling and testing carbon black for use in the rubber industry – Method for determination…
