BS EN 10263-3:2017
$102.76
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions for case hardening steels
Published By | Publication Date | Number of Pages |
BSI | 2017 | 22 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment. 1.2 prEN 10263-1:2013 is indispensable for this Part of EN 10263.
PDF Catalog
PDF Pages | PDF Title |
---|---|
2 | National foreword |
6 | 1 Scope 2 Normative references 3 Terms and definitions 4 Classification and Designation 4.1 Classification 4.2 Designation |
7 | 5 Production process 5.1 Steelmaking process 5.2 Deoxidation 6 Requirements 6.1 Delivery conditions 6.2 Chemical composition 6.2.1 Cast analysis 6.2.2 Product analysis 6.3 Mechanical properties 6.4 Hardenability |
8 | 6.5 Surface quality 6.6 Supplementary or special requirements |
Status | Confirmed |
---|---|
Pages | 22 |
Publication Date | 2017-11-20 |
ISBN | 978 0 580 85296 1 |
Standard Number | BS EN 10263-3:2017 |
Title | Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions for case hardening steels |
Identical National Standard Of | EN 10263-3:2017 |
Replaces | BS EN 10263-3:2001, BS EN 10263-3:2001 |
Descriptors | Delivery, Technical requirements, Extrusion welding, Wire cables, Chromium steels |
Publisher | BSI |
Committee | ISE/106 |
ICS Codes | 77.140.65 - Steel wire, wire ropes and link chains |
Related products
-
BS EN ISO 10273:2017
Microbiology of the food chain. Horizontal method for the detection of pathogenic Yersinia enterocolitica Published…
-
BS EN 10088-1:2014
Stainless steels – List of stainless steels Published By Publication Date Number of Pages BSI…
-
BS EN 10263-5:2001
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN 10213-4:1996
Technical delivery conditions for steel castings for pressure purposes – Austenitic and austenitic-ferritic steel grades…
-
BS EN 10263-1:2001:2002 Edition
Steel rod, bars and wire for cold heading and cold extrusion – General technical delivery…
-
BS EN 10283:2019
Corrosion resistant steel castings Published By Publication Date Number of Pages BSI 2019 24
-
BS EN 10263-5:2017
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN 16263-4:2015:2017 Edition
Pyrotechnic articles. Other pyrotechnic articles – Test methods Published By Publication Date Number of Pages…
-
BS EN 10163-1:2004:2007 Edition
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections – General…
-
BS EN ISO 17263:2012:2014 Edition
Intelligent transport systems. Automatic vehicle and equipment identification. Intermodal goods transport system parameters Published By…
-
BS EN 10273:2007:2008 Edition
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties Published By…
-
BS 8411:2019
Safety nets on construction sites and other works. Code of practice Published By Publication Date…
-
BS EN 10263-1:2017
Steel rod, bars and wire for cold heading and cold extrusion – General technical delivery…
-
BS EN 10263-2:2017
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN 10263-2:2001
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN ISO 10563:2017
Buildings and civil engineering works. Sealants. Determination of change in mass and volume Published By…
-
BS EN 10263-3:2017 – TC:2020 Edition
Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion – Technical…
-
BS EN 10283:2010
Corrosion resistant steel castings Published By Publication Date Number of Pages BSI 2010 20
-
BS EN 10213-3:1996
Technical delivery conditions for steel castings for pressure purposes – Steels for use at low…
-
BS EN 10263-1:2017 – TC:2020 Edition
Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion – General…
-
BS EN 10263-4:2017
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN 16263-3:2015:2017 Edition
Pyrotechnic articles. Other pyrotechnic articles – Categories and types Published By Publication Date Number of…
-
BS EN 10263-4:2001:2003 Edition
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN 10213:2007+A1:2016
Steel castings for pressure purposes Published By Publication Date Number of Pages BSI 2016 32
-
BS EN 10268:2006+A1:2013
Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions…
-
BS EN 10264-3:2012
Steel wire and wire products. Steel wire for ropes – Round and shaped non alloyed…
-
BS EN 10273:2016
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties Published By…
-
BS EN ISO 10563:2023
Building and civil engineering sealants. Determination of change in mass and volume Published By Publication…
-
BS EN 10223-3:2013
Steel wire and wire products for fencing and netting – Hexagonal steel wire mesh products…
-
BS EN ISO 10273:2003
Microbiology of food and animal feeding stuffs. Horizontal method for the detection of presumptive pathogenic…
-
BS EN ISO 10563:2005
Building construction. Sealants. Determination of change in mass and volume Published By Publication Date Number…
-
BS EN 10263-5:2017 – TC:2020 Edition
Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion – Technical…
-
BS EN 10263-4:2017 – TC:2020 Edition
Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion – Technical…
-
BS EN 10213-2:1996
Technical delivery conditions for steel castings for pressure purposes – Steel grades for use at…
-
BS EN ISO 13263:2017:2018 Edition
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact…
-
BS EN 10263-2:2017 – TC:2020 Edition
Tracked Changes. Steel rod, bars and wire for cold heading and cold extrusion – Technical…
-
BS EN ISO 10253:2016
Water quality. Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum Published By…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN 10263-3:2001
Steel rod, bars and wire for cold heading and cold extrusion – Technical delivery conditions…
-
BS EN 10264-1:2012
Steel wire and wire products. Steel wire for ropes – General requirements Published By Publication…