BS EN 61000-2-9:1996
$142.49
Electromagnetic compatibility (EMC). Environment – Description of HEMP environment. Radiated disturbance. Basic EMC publication
Published By | Publication Date | Number of Pages |
BSI | 1996 | 28 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This section of IEC 1000-2 defines the high-altitude electromagnetic pulse (HEMP) environment that is one of the consequences of a high-altitude nuclear explosion.
Those dealing with this subject consider two cases:
-
high-altitude nuclear explosions;
-
low-altitude nuclear explosions.
For civil systems, the most important case is the high-altitude nuclear explosion. In this case, the other effects of the nuclear explosion: blast, ground shock, thermal and nuclear ionizing radiation are not present at the ground level. However the electromagnetic pulse associated with the explosion may cause disruption of, and damage to, communication, electronic and electric power systems thereby upsetting the stability of modern society.
The object of this standard is to establish a common reference for the HEMP environment in order to select realistic stresses to apply to victim equipment for evaluating their performance.
This standard defines the electromagnetic pulse environments resulting from both high and low altitude nuclear explosions.
Status | Revision Underway |
---|---|
Pages | 28 |
Publication Date | 1996-12-15 |
ISBN | 0 580 26354 1 |
Standard Number | BS EN 61000-2-9:1996, IEC 61000-2-9:1996 |
Title | Electromagnetic compatibility (EMC). Environment – Description of HEMP environment. Radiated disturbance. Basic EMC publication |
Identical National Standard Of | EN 61000-2-9:1996, IEC 61000-2-9:1996 |
Descriptors | Communication equipment, Explosions, Electromagnetic compatibility, Nuclear tests, Electronic equipment and components, Electromagnetic fields, Nuclear radiation, Electric field effects, Noise (spurious signals), Field strength (electric), Electromagnetic radiation, Waveforms, Electric power system disturbances, Electric power networks |
Publisher | BSI |
Committee | GEL/210 |
ICS Codes | 33.100.01 - Electromagnetic compatibility in general |
Related products
-
BS EN 61000-4-10:1994:2001 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Damped oscillatory magnetic field immunity test. Basic…
-
BS EN 61000-4-8:1994:2001 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Power frequency magnetic field immunity test. Basic…
-
BS EN 61010-2-061:1996
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61000-2-10:1999
Electromagnetic compatibility (EMC). Environment – Description of HEMP environment. Conducted disturbance Published By Publication Date…
-
BS EN 60931-2:1994
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up…
-
BS CECC 16000-1:1992
Harmonized system of quality assessment for electronic components. Generic specification: electromechanical all-or-nothing relays – General…
-
BS EN 61300-2-9:1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests – Shock…
-
BS EN 60851-2:1998:2004 Edition
Winding Wires. Test methods – Determination of dimensions Published By Publication Date Number of Pages…
-
BS EN 61010-2-043:1998
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61050:1992
Specification for transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V…
-
BS EN 61000-6-2:1999
Electromagnetic compatibility (EMC). Generic standards – Immunity for industrial environments – Generic immunity standard for…
-
BS EN 61000-4-5:1995:2001 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Surge immunity test Published By Publication Date…
-
BS EN 61000-6-3:2001:2005 Edition
Electromagnetic compatibility (EMC). Generic standards – Emission standard for residential, commercial and light-industrial environments Published…
-
BS EN 61000-5-5:1996
Electromagnetic compatibility (EMC). Installation and mitigation guidelines – Specification of protective devices for HEMP conducted…
-
BS EN 61000-4-12:1996:2001 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Oscillatory waves immunity test. Basic EMC publication…
-
BS EN 61300-3-2:1997
Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements…
-
BS EN 61010-2-031:1995
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61000-4-12:2006:2007 Edition
Electromagnetic compatibility (EMC) – Testing and measurement techniques. Ring wave immunity test Published By Publication…
-
BS EN 61000-4-2:1995:2001 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Electrostatic discharge immunity test. Basic EMC publication…
-
BS EN 60079-1:2007:2011 Edition
Explosive atmospheres – Equipment protection by flameproof enclosures “d” Published By Publication Date Number of…
-
BS EN 61010-2-020:1995:1993 Edition
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 60249-2-1:1994:2001 Edition
Specifications – Specification for phenolic cellulose paper copper-clad laminated sheet, high electrical quality Published By…
-
BS EN 61010-2-051:1996
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS 3970-1:1990
Sterilizing and disinfecting equipment for medical products – Specification for general requirements Published By Publication…
-
BS EN 61000-4-3:1997:2001 Edition
Electromagnetic compatibility (EMC) – Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test…
-
BS EN 61000-4-18:2007+A1:2010
Electromagnetic compatibility (EMC) – Testing and measurement techniques. Damped oscillatory wave immunity test Published By…
-
BS EN 61040:1993
Specification for power and energy measuring detectors, instruments and equipment for laser radiation Published By…
-
BS EN 61000-4-6:1996:2005 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency…
-
BS EN 61000-3-3:1995+A2:2005:2009 Edition
Electromagnetic compatibility (EMC) – Limits. Limitation of voltage changes, voltage fluctuations and flicker in public…
-
BS EN 61000-4-15:1998:2003 Edition
Electromagnetic compatibility (EMC). Testing and measurement techniques – Flickermeter. Functional and design specifications. Basic EMC…
-
BS EN 62020:1999:2006 Edition
Electrical accessories. Residual current monitors for household and similar uses (RCMs) Published By Publication Date…
-
BS EN 61000-4-6:2007
Electromagnetic compatibility (EMC) – Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency…
-
BS EN 50055:1999
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group I…
-
BS EN 61010-2-010:1995:1993 Edition
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61020-1:2009:2013 Edition
Electromechanical switches for use in electrical and electronic equipment – Generic specification Published By Publication…
-
BS EN 61010-2-040:2005:2006 Edition
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61000-4-7:1993
Electromagnetic compatibility (EMC) – General guide on harmonics and interharmonics measurements and instrumentation, for power…
-
BS EN 61010-2-032:1995
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61010-2-041:1997
Safety requirements for electrical equipment for measurement, control and laboratory use – Particular requirements for…
-
BS EN 61000-2-9:1996
Electromagnetic compatibility (EMC). Environment – Description of HEMP environment. Radiated disturbance. Basic EMC publication Published…