BS EN ISO 12010:2014
$167.15
Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)
Published By | Publication Date | Number of Pages |
BSI | 2014 | 38 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
ISO 12010:2012 specifies a method for the quantitative determination of the sum of short-chain polychlorinated n?alkanes, also known as short-chain polychlorinated paraffins (SCCPs), in the carbon bond range n-C10 to n-C13 inclusive, in mixtures with chlorine mass fractions (“contents”) between 49 % and 67 %, including approximately 6 300 of approximately 8 000 congeners. This method is applicable to the determination of the sum of SCCPs in unfiltered surface water, ground water, drinking water and waste water using gas chromatography-mass spectrometry with electron capture negative ionization (GC-ECNI-MS). The method can be applied to samples containing 0,1 µg/l to 10 µg/l. Depending on the waste water matrix, the lowest detectable concentration is estimated to be >0,1 µg/l.
Status | Withdrawn |
---|---|
Title | Water quality. Determination of short-chain polychlorinated alkanes (SCCPs) in water. Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI) |
Corrects | BS ISO 12010:2012 |
Publisher | BSI |
Committee | EH/3/2 |
Pages | 38 |
Publication Date | 2014-06-30 |
Withdrawn Date | 2019-04-17 |
Replaced By | BS EN ISO 12010:2019 |
ISBN | 978 0 580 84022 7 |
Standard Number | BS EN ISO 12010:2014 |
Identical National Standard Of | ISO 12010:2012, EN ISO 12010:2014, ISO 12010 |
Descriptors | Industrial water pollutants, Water pollution, Water, Sampling methods, Chemical analysis and testing, Sampling equipment, Chemical water pollutants, Surface water, Chemical diffusion, Water testing, Quality |
ICS Codes | 13.060.50 - Examination of water for chemical substances |
Related products
-
BS EN ISO 175:2010
Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals…
-
BS EN ISO 3744:2010:2011 Edition
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound…
-
BS EN ISO 178:2010+A1:2013
Plastics. Determination of flexural properties Published By Publication Date Number of Pages BSI 2013 28
-
BS EN ISO 13341:2010+A1:2015
Gas cylinders. Fitting of valves to gas cylinders Published By Publication Date Number of Pages…
-
BS EN ISO 439:2010
Steel and iron. Determination of total silicon content. Gravimetric method Published By Publication Date Number…
-
BS EN ISO 18274:2010:2011 Edition
Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion…
-
BS EN ISO 10140-5:2010+A1:2014
Acoustics. Laboratory measurement of sound insulation of building elements – Requirements for test facilities and…
-
BS EN ISO 4534:2010:2014 Edition
Vitreous and porcelain enamels. Determination of fluidity behaviour. Fusion flow test Published By Publication Date…
-
BS EN ISO 10808:2010:2011 Edition
Nanotechnologies. Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing Published By Publication…
-
BS EN ISO 2739:2010
Sintered metal bushes. Determination of radial crushing strength Published By Publication Date Number of Pages…
-
BS EN ISO 12958:2010
Geotextiles and geotextile-related products. Determination of water flow capacity in their plane Published By Publication…
-
BS EN ISO 14602:2010
Non-active surgical implants. Implants for osteosynthesis. Particular requirements Published By Publication Date Number of Pages…
-
BS EN ISO 15350:2010
Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion…
-
BS EN ISO 3821:2010
Gas welding equipment. Rubber hoses for welding, cutting and allied processes Published By Publication Date…
-
BS EN ISO 1182:2010
Reaction to fire tests for products. Non-combustibility test Published By Publication Date Number of Pages…
-
BS EN ISO 11130:2010
Corrosion of metals and alloys. Alternate immersion test in salt solution Published By Publication Date…
-
BS EN ISO 3266:2010+A1:2015
Forged steel eyebolts grade 4 for general lifting purposes Published By Publication Date Number of…
-
BS EN ISO 12863:2010+A1:2016
Standard test method for assessing the ignition propensity of cigarettes Published By Publication Date Number…
-
BS EN ISO 11058:2010
Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load…
-
BS EN ISO 3369:2010
Impermeable sintered metal materials and hardmetals. Determination of density Published By Publication Date Number of…
-
BS EN ISO 5173:2010+A1:2011
Destructive tests on welds in metallic materials. Bend tests Published By Publication Date Number of…
-
BS EN ISO 11201:2010
Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a…
-
BS EN ISO 11666:2010:2011 Edition
Non-destructive testing of welds. Ultrasonic testing. Acceptance levels Published By Publication Date Number of Pages…
-
BS EN ISO 11609:2010
Dentistry. Dentifrices. Requirements, test methods and marking Published By Publication Date Number of Pages BSI…
-
BS EN ISO 2010:2011
Slotted raised countersunk head screws. Product grade A Published By Publication Date Number of Pages…
-
BS EN ISO 10451:2010
Dentistry. Contents of technical file for dental implant systems Published By Publication Date Number of…
-
BS EN ISO 20072:2010
Aerosol drug delivery device design verification. Requirements and test methods Published By Publication Date Number…
-
BS EN ISO 18286:2010:2012 Edition
Hot-rolled stainless steel plates. Tolerances on dimensions and shape Published By Publication Date Number of…
-
BS EN ISO 10210:2017:2018 Edition
Plastics. Methods for the preparation of samples for biodegradation testing of plastic materials Published By…
-
BS EN ISO 23125:2010+A1:2012
Machine tools. Safety. Turning machines Published By Publication Date Number of Pages BSI 2012 88
-
BS EN ISO 1942:2010
Dentistry. Vocabulary Published By Publication Date Number of Pages BSI 2010 94
-
BS EN ISO 3741:2010
Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound…
-
BS EN ISO 13943:2010
Fire safety. Vocabulary Published By Publication Date Number of Pages BSI 2010 62
-
BS EN ISO 17640:2010:2011 Edition
Non-destructive testing of welds. Ultrasonic testing. Techniques, testing levels, and assessment Published By Publication Date…
-
BS EN ISO 10052:2004+A1:2010
Acoustics. Field measurements of airborne and impact sound insulation and of service equipment sound. Survey…
-
BS EN ISO 14050:2010:2011 Edition
Environmental management. Vocabulary Published By Publication Date Number of Pages BSI 2011 184
-
BS EN ISO 15549:2010:2011 Edition
Non-destructive testing. Eddy current testing. General principles Published By Publication Date Number of Pages BSI…
-
BS EN ISO 10140-1:2010+A2:2014
Acoustics. Laboratory measurement of sound insulation of building elements – Application rules for specific products…
-
BS EN ISO 9539:2010+A1:2013:2014 Edition
Gas welding equipment. Materials for equipment used in gas welding, cutting and allied processes Published…
-
BS EN ISO 7291:2010+A1:2015
Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes…