BS EN ISO 2871-2:2010
$86.31
Surface active agents. Detergents. Determination of cationic-active matter content – Cationic-active matter of low molecular mass (between 200 and 500)
Published By | Publication Date | Number of Pages |
BSI | 2010 | 14 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 2871 specifies a method for the determination of low-molecular-mass cationic-active materials such as monoamines, amine oxides, quaternary ammonium compounds and alkylpyridinium salts which have a main chain of 10 to 22 carbon atoms and not more than 6 other carbon atoms in the cation.
The method is also suitable for other cationic-active materials.
The method is applicable to solids or to aqueous solutions of the active material when the relative molecular mass of the cationic-active matter is known or when it has been previously determined if its content is expressed as a percentage by mass. If more than one type of cationic-active material is present, an estimate of average relative molecular mass may be used.
The method is not applicable if anionic and/or amphoteric surface active agents are present.
Status | Confirmed |
---|---|
Pages | 14 |
Publication Date | 2010-04-30 |
ISBN | 978 0 580 68045 8 |
Standard Number | BS EN ISO 2871-2:2010 |
Title | Surface active agents. Detergents. Determination of cationic-active matter content – Cationic-active matter of low molecular mass (between 200 and 500) |
Identical National Standard Of | EN ISO 2871-2:2010, ISO 2871-2:2010 |
Replaces | BS EN ISO 2871-2:1994 |
Descriptors | Determination of content, Volumetric analysis, Interferences (chemical), Cations, Detergents, Chemical analysis and testing, Cleaning materials, Surfactants, Reproducibility |
Publisher | BSI |
Committee | CII/34 |
ICS Codes | 71.100.40 - Surface active agents |
Related products
-
BS EN ISO 11148-3:2010
Hand-held non-electric power tools. Safety requirements – Drills and tappers Published By Publication Date Number…
-
BS EN 280-1:2022 – TC
Tracked Changes. Mobile elevating work platforms – Design calculations. Stability criteria. Construction. Safety. Examinations and…
-
BS EN 287-1:2011
Qualification test of welders. Fusion welding – Steels Published By Publication Date Number of Pages…
-
BS 5871-4:2007
Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative…
-
BS EN ISO 2811-2:2011
Paints and varnishes. Determination of density – Immersed body (plummet) method Published By Publication Date…
-
BS EN ISO 2811-1:2001:2002 Edition
Paints and varnishes. Determination of density – Pyknometer method Published By Publication Date Number of…
-
BS EN ISO 10555-6:2017+A1:2019
Intravascular catheters. Sterile and single-use catheters – Subcutaneous implanted ports Published By Publication Date Number…
-
BS EN ISO 2811-3:2001:2002 Edition
Paints and varnishes. Determination of density – Oscillation method Published By Publication Date Number of…
-
BS EN ISO 2871-2:1994
Surface active agents. Detergents. Determination of cationic-active matter content – Cationic-active matter of low molecular…
-
BS EN ISO 2171:2010
Cereals, pulses and by-products. Determination of ash yield by incineration Published By Publication Date Number…
-
BSI PD CEN/TR 17868:2022
Intelligent transport systems. EU-ICIP. ITS standards deliverables (2022) Published By Publication Date Number of Pages…
-
BS EN ISO 2811-4:2011
Paints and varnishes. Determination of density – Pressure cup method Published By Publication Date Number…
-
BS EN ISO 28721-4:2015
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Quality requirements for glass-lined flanged…
-
BS EN ISO 8871-2:2020:2024 Edition
Elastomeric parts for parenterals and for devices for pharmaceutical use – Identification and characterization Published…
-
BS EN ISO 12759:2015
Fans. Efficiency classification for fans Published By Publication Date Number of Pages BSI 2015 54
-
BS EN ISO 11148-3:2012:2013 Edition
Hand-held non-electric power tools. Safety requirements – Drills and tappers Published By Publication Date Number…
-
BS EN ISO 7291:2001
Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes…
-
BS EN ISO 2811-2:2001:2002 Edition
Paints and varnishes. Determination of density – Immersed body (plummet) method Published By Publication Date…
-
BS EN ISO 2811-1:2016
Paints and varnishes. Determination of density – Pycnometer method Published By Publication Date Number of…
-
BS EN ISO 10555-1:2013+A1:2017:2018 Edition
Intravascular catheters. Sterile and single-use catheters – General requirements Published By Publication Date Number of…
-
BS EN ISO 28721-2:2015:2016 Edition
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Designation and specification of resistance…
-
BS EN ISO 2811-1:2011
Paints and varnishes. Determination of density – Pyknometer method Published By Publication Date Number of…
-
BS EN ISO 28721-4:2012:2013 Edition
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Quality requirements for glass-lined flanged…
-
BS EN ISO 175:2001
Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals…
-
BS EN ISO 28721-1:2011
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Quality requirements for apparatus, components,…
-
BS EN ISO 2811-3:2011
Paints and varnishes. Determination of density – Oscillation method Published By Publication Date Number of…
-
BS ISO/IEC 27006:2011:2012 Edition
Information technology. Security techniques. Requirements for bodies providing audit and certification of information security management…
-
BS EN ISO 28721-2:2015 – TC:2020 Edition
Tracked Changes. Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Designation and specification…
-
BS EN ISO 18082:2014+A1:2017:2019 Edition
Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases Published…
-
BS EN ISO 8871-2:2020:2024 Edition
Elastomeric parts for parenterals and for devices for pharmaceutical use – Identification and characterization Published…
-
BS EN ISO 2871-1:2010
Surface active agents. Detergents. Determination of cationic-active matter content – High-molecular-mass cationic-active matter Published By…
-
BS EN ISO 28721-2:2011
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Designation and specification of resistance…
-
BS EN ISO 2811-4:2001:2002 Edition
Paints and varnishes. Determination of density – Pressure cup method Published By Publication Date Number…
-
BS EN ISO 28721-1:2019
Vitreous and porcelain enamels. Glass-lined apparatus for process plants – Quality requirements for apparatus, components,…
-
BS EN ISO 2871-1:1994
High molecular mass cationic-active matter Published By Publication Date Number of Pages BSI 1994 10
-
BS EN ISO 18082:2014+A1:2017:2019 Edition
Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases Published…
-
BS EN ISO 7291:2010+A1:2015
Gas welding equipment. Pressure regulators for manifold systems used in welding, cutting and allied processes…
-
BS EN ISO 16610-61:2015+A1:2020
Geometrical product specification (GPS). Filtration – Linear areal filters. Gaussian filters Published By Publication Date…
-
BS EN ISO 16610-61:2015+A1:2020
Geometrical product specification (GPS). Filtration – Linear areal filters. Gaussian filters Published By Publication Date…
-
BS EN ISO 18082:2014+A1:2017
Anaesthetic and respiratory equipment. Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases Published…