BS EN ISO 389-8:2004
$102.76
Acoustics. Reference zero for the calibration of audiometric equipment – Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
Published By | Publication Date | Number of Pages |
BSI | 2004 | 16 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
This part of ISO 389 specifies reference equivalent threshold sound pressure levels (RETSPLs) for pure tones in the frequency range from 125 Hz to 8 kHz, applicable to the calibration of air conduction audiometers equipped with a particular model of circumaural earphones (SENNHEISER HDA 200).
NOTE Some notes and references on the derivation and the test conditions used to determine the recommended reference levels are given in Annex A and the Bibliography.
The sound attenuation of the earphone is given in Annex B. For speech audiometers of types A-E and B-E (see IEC 60645-2), the correction figures of the earphone for a free-field equivalent output are given in Annex C.
Status | Confirmed |
---|---|
Pages | 16 |
Publication Date | 2004-06-08 |
ISBN | 0 580 43854 6 |
Standard Number | BS EN ISO 389-8:2004 |
Title | Acoustics. Reference zero for the calibration of audiometric equipment – Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones |
Identical National Standard Of | EN ISO 389-8:2004, ISO 389-8:2004 |
Descriptors | Audiometry, Hearing (auditory perception), Calibration |
Publisher | BSI |
Committee | EH/1/1 |
ICS Codes | 11.040.01 - Medical equipment in general |
Related products
-
BS 6323-1:1982
Specification for seamless and welded steel tubes for automobile, mechanical and general engineering purposes –…
-
BS EN ISO 389-9:2009 2010
Acoustics. Reference zero for the calibration of audiometric equipment – Preferred test conditions for the…
-
BS EN ISO 8502-8:2004 2005
Preparation of steel substrates before application of paints and related products. Tests for the assessment…
-
BS EN ISO 389-5:2006 2007
Acoustics. Reference zero for the calibration of audiometric equipment – Reference equivalent threshold sound pressure…
-
BSI PD 6687-2:2008
Recommendations for the design of structures to BS EN 1992-2:2005 Published By Publication Date Number…
-
BS EN IEC 61968-4:2019 – TC:2020 Edition
Tracked Changes. Application integration at electric utilities. System interfaces for distribution management – Interfaces for…
-
BS 4008:2006
Specification for cattle grids Published By Publication Date Number of Pages BSI 2006 22
-
BS EN ISO 3892:2001
Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods Published…
-
BS EN 14411:2003:2004 Edition
Ceramic tiles. Definitions, classification, characteristics and marking Published By Publication Date Number of Pages BSI…
-
BS EN ISO 11073-10201:2005:2006 Edition
Health informatics. Point-of-care medical device communication – Domain information model Published By Publication Date Number…
-
BS EN ISO 11607-2:2017 – TC:2019 Edition
Tracked Changes. Packaging for terminally sterilized medical devices – Validation requirements for forming, sealing and…
-
BS 6400-3:2007
Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not…
-
BS EN ISO 389-7:1998
Acoustics. Reference zero for the calibration of audiometric equipment – Reference threshold of hearing under…
-
BS EN ISO 14343:2007
Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and…
-
BS EN ISO 8502-2:2005 2006
Preparation of steel substrates before application of paints and related products. Tests for the assessment…
-
BS EN ISO 14673-2:2004
Milk and milk products. Determination of nitrate and nitrite contents – Method using segmented flow…
-
BS EN ISO 14172:2003:2006 Edition
Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification…
-
BS EN ISO 389-6:2007
Acoustics. Reference zero for the calibration of audiometric equipment – Reference threshold of hearing for…
-
BS EN ISO 179-1:2001:2006 Edition
Plastics. Determination of Charpy impact properties – Non-instrumented impact test Published By Publication Date Number…
-
BS EN ISO 10993-4:2002:2006 Edition
Biological evaluation of medical devices – Selection of tests for interactions with blood Published By…
-
BS EN ISO 3838:2004
Methods of test for petroleum and its products. BS 2000-189 Crude petroleum and liquid or…
-
BS EN ISO 10684:2004:2009 Edition
Fasteners. Hot dip galvanized coatings Published By Publication Date Number of Pages BSI 2009 30
-
BS 7799-2:2002
Information security management – Specification with guidance for use Published By Publication Date Number of…
-
BS EN ISO 389-7:2019
Acoustics. Reference zero for the calibration of audiometric equipment – Reference threshold of hearing under…
-
BS EN ISO 11998:2001:2002 Edition
Paints and varnishes. Determination of wet-scrub resistance and cleanability of coatings Published By Publication Date…
-
BS EN ISO 389-5:2001
Acoustics. Reference zero for the calibration of audiometric equipment – Reference equivalent threshold sound pressure…
-
BS 3289:2005
Textile carcase conveyor belting for use in underground mines (including fire performance). Specification Published By…
-
BS EN ISO/IEC 80079-34:2020 – TC
Tracked Changes. Explosive atmospheres – Application of quality systems for ex product manufacture Published By…
-
BS EN ISO 13790:2008
Energy performance of buildings. Calculation of energy use for space heating and cooling Published By…
-
BS 8800:2004
Occupational health and safety management systems. Guide Published By Publication Date Number of Pages BSI…
-
BS EN ISO 8330:2008
Rubber and plastics hoses and hose assemblies. Vocabulary Published By Publication Date Number of Pages…
-
BS EN ISO 13485:2016 – TC:2019 Edition
Tracked Changes. Medical devices. Quality management systems. Requirements for regulatory purposes Published By Publication Date…
-
BS EN ISO 294-2:1998:2006 Edition
Plastics. Injection moulding of test specimens of thermoplastic materials – Small tensile bars Published By…
-
BS EN 379:2003+A1:2009
Personal eye-protection. Automatic welding filters Published By Publication Date Number of Pages BSI 2009 26
-
BS EN ISO 660:2000 2005
Animal and vegetable fats and oils. Determination of acid value and acidity Published By Publication…
-
BS EN ISO 11073-30300:2005:2006 Edition
Health informatics. Point-of-care medical device communication – Transport profile. Infrared wireless Published By Publication Date…
-
BS 6400-1:2006
Specification for installation, exchange, relocation and removal of gas meters with a maximum capacity not…
-
BS EN ISO 11681-1:2004:2007 Edition
Machinery for forestry. Portable chain-saw safety requirements and testing – Chain-saws for forest service Published…
-
BS EN ISO 3613:2001:2002 Edition
Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys. Test methods Published By…
-
BS 5871-4:2007
Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative…