🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
ASME BPVC II B 2019

ASME BPVC II B 2019

$377.00

ASME BPVC – II – B -2019 BPVC Section II, Materials, Part B, Nonferrous Material Specifications

Published By Publication Date Number of Pages
ASME 2019 1273
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Category:

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

This Section is a “Service Section” to the other BPVC Sections, providing material specifications for ferrous materials adequate for safety in the field of pressure equipment. These specifications contain requirements for chemical and mechanical properties, heat treatment, manufacture, heat and product analyses, and methods of testing. They are designated by SB numbers and are identical with or similar to those of specifications published by ASTM and other recognized national or international organizations. Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.

PDF Catalog

PDF Pages PDF Title
5 Table of Contents
11 List of Sections
12 INTERPRETATIONS
CODE CASES
13 Foreword
15 Statement of Policy on the Use of the ASME Single Certification Mark and Code Authorization in Advertising
Statement of Policy on the Use of ASME Marking to Identify Manufactured Items
16 Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees
1 Introduction
2 Inquiry Format
17 3 Code Revisions or Additions
4 Code Cases
5 Code Interpretations
18 6 Submittals
19 Personnel
41 ASTM Personnel
42 Preface
43 Specifications Listed by Materials
48 Specification Removal
49 Summary of Changes
51 List of Changes in Record Number Order
53 Cross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code
Subparagraph Breakdowns/Nested Lists Hierarchy
Footnotes
Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees
Cross-References
55 SB-26/SB-26M
69 SB-42
77 SB-43
85 SB-61
89 SB-62
93 SB-75
105 SB-96/SB-96M
111 SB-98/SB-98M
117 SB-108
135 SB-111/SB-111M
149 SB-127
159 SB-135
167 SB-148
173 SB-150/SB-150M
181 SB-151/SB-151M
187 SB-152/SB-152M
195 SB-160
205 SB-161
211 SB-162
227 SB-163
239 SB-164
253 SB-165
259 SB-166
269 SB-167
277 SB-168
293 SB-169/SB-169M
299 SB-171/SB-171M
307 SB-187/SB-187M
317 SB-209
343 SB-210
355 SB-211
365 SB-221
381 SB-234
389 SB-241/SB-241M
409 SB-247
427 SB-248
441 SB-249/SB-249M
455 SB-251
463 SB-265
477 SB-271/SB-271M
485 SB-283/SB-283M
499 SB-308/SB-308M
505 SB-315
515 SB-333
521 SB-335
527 SB-338
537 SB-348
547 SB-359/SB-359M
559 SB-363
565 SB-366/SB-366M
575 SB-367
583 SB-369
589 SB-381
599 SB-395/SB-395M
611 SB-407
621 SB-408
627 SB-409
633 SB-423
639 SB-424
645 SB-425
653 SB-434
657 SB-435
661 SB-443
673 SB-444
677 SB-446
683 SB-462
689 SB-463
695 SB-464
699 SB-466/SB-466M
707 SB-467
715 SB-468
719 SB-473
729 SB-493/SB-493M
733 SA-494/SA-494M
741 SB-505/SB-505M
751 SB-511
761 SB-514
765 SB-515
769 SB-516
773 SB-517
777 SB-523/SB-523M
783 SB-535
787 SB-536
799 SB-543/SB-543M
813 SB-548
819 SB-550/SB-550M
825 SB-551/SB-551M
837 SB-564
849 SB-572
855 SB-573
861 SB-574
867 SB-575
873 SB-581
879 SB-582
883 SB-584
891 SB-599
905 SB-619
913 SB-620
917 SB-621
921 SB-622
929 SB-625
943 SB-626
949 SB-637
959 SB-649
971 SB-653/SB-653M
975 SB-658/SB-658M
981 SB-666/SB-666M
989 SB-668
993 SB-672
1001 SB-673
1007 SB-674
1011 SB-675
1015 SB-676
1019 SB-677
1025 SB-688
1035 SB-690
1043 SB-691
1051 SB-704
1055 SB-705
1059 SB-706
1067 SB-709
1079 SB-710
1083 SB-729
1087 SB-751
1095 SB-775
1101 SB-804
1109 SB-815
1113 SB-818
1117 SB-824
1123 SB-829
1131 SB-858
1135 SB-861
1145 SB-862
1157 SB-906
1175 SB-928/SB-928M
1189 SB-956/SB-956M
1199 SF-467
1211 SF-467M
1221 SF-468
1235 SF-468M
1247 SB/EN 1706
1249 Mandatory Appendices
Mandatory Appendix I Standard Units for Use in Equations
I-1 Standard Units for Use in Equations
1250 Mandatory Appendix II Basis for Use of Acceptable ASME, ASTM, and Non-ASTM Editions
II-100 Materials Adopted for Use in Construction Codes
II-200 Acceptable Editions
1251 II-300 Other Acceptable Specifications
II-400 References to ASTM Specifications
II-500 Country of Origin
1252 II-200-1 Other Acceptable ASTM Editions
1258 II-200-2 Other Acceptable Non-ASTM Specifications
1259 Mandatory Appendix III Guidelines on Multiple Marking of Materials
III-100 Background
III-200 Guidelines
III-210 Acceptability of Multiple Marking
III-220 Prohibition on Multiple Marking
III-230 Grade Substitution
III-240 Marking Selection
1260 III-250 Other Markings
1261 Mandatory Appendix IV Guidelines on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code
IV-100 Code Policy
IV-200 Application
1262 IV-100-1 Hot Isostatically Pressed Component Requirements for Austenitic Stainless Steels, Austenitic–Ferritic (Duplex) Stainless Steels, Martensitic Stainless Steels, Ferritic Steels, and Nickel Alloys
1263 IV-300 Chemical Composition
IV-400 Metallurgical Structure and Heat Treatment
IV-500 Mechanical Properties
IV-600 Definitions for Data Collection Purposes
IV-700 Required Sampling
1264 IV-800 Time-Independent Properties
IV-900 Time-Dependent Properties
1265 IV-800-1 ASTM Test Methods and Units for Reporting
1266 IV-1000 Low-Temperature Properties
IV-1100 Toughness Data
IV-1200 Stress–Strain Curves
IV-1300 Fatigue Data
IV-1400 Physical Properties
1267 IV-1500 Data Requirements for Welds, Weldments, and Weldability
IV-1600 Long-Term Properties Stability
1268 IV-1500-1 Example of a Comparison of Allowable Stresses of Base Metals With Compositions Similar to Those of Selected Welding Consumables and the Proposed New Base Metal
1269 IV-1700 Requests for Additional Data
IV-1800 New Materials Checklist
IV-1900 Requirements for Recognized National or International Specifications
IV-2000 Publication of Recognized National or International Specifications
IV-2100 CEN Specifications
1271 Nonmandatory Appendices
Nonmandatory Appendix A Sources of Standards

Related products

ASME BPVC II B 2019
$377.00