ASTM-D2444 2010
$40.63
D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 9 |
1.1 This test method covers the determination of the impact resistance of thermoplastic pipe and fittings under specified conditions of impact by means of a tup (falling weight). Three interchangeable striking noses are used on the tup, differing in geometrical configuration. Two specimen holders are described.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Significance and Use Apparatus |
| 2 | Test Specimens Number of Test Specimens Conditioning FIG. 1 FIG. 2 |
| 3 | Procedure—General Procedure—Details Definition of Failure Report |
| 4 | Precision and Bias Keywords X1. GUIDELINES FOR DETERMINING PRECISION AND ACCURACY BY APPLYING BINOMIAL PROBABILITY TECHNIQUES X1.1 X1.2 X1.3 X1.4 X1.5 X1.6 X1.7 X1.8 X1.9 |
| 5 | FIG. X1.1 |
| 6 | X2. PROBABILITY GRAPH PAPER X2.1 X2.2 |
| 7 | X3. “UP/DOWN” TEST PROCEDURE TO DEFINE THE MEAN IMPACT RESISTANCE X3.1 Number of Test Specimens X3.2 Conditioning X3.3 Procedure—General FIG. X2.1 |
| 8 | X3.4 Procedure—Details X3.5 Procedure—Specification Requirement X3.6 Definition of Failure X3.7 Calculations |
| 9 | X4. GUIDELINES FOR SELECTION OF TESTING COMBINATIONS X4.1 |
Related products
-
ASTM-D5444 2015(Redline)
D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate (Redline) Published By Publication…
-
ASTM-D2444 2019
D2444-19 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by…
-
ASTM-D2244 2011
D2244-11 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color…
-
ASTM-D2944 2014(Redline)
D2944-14 Standard Practice of Sampling Processed Peat Materials (Redline) Published By Publication Date Number of…
-
ASTM-D2434 2000
D2434-68(2000) Standard Test Method for Permeability of Granular Soils (Constant Head) Published By Publication Date…
-
ASTM-D2444 2017
D2444-17 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by…
-
ASTM-D2464 2015(Redline)
D2464-15 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 (Redline) Published…
-
ASTM-D2442 2001
D2442-75(2001) Standard Specification for Alumina Ceramics for Electrical and Electronic Applications Published By Publication Date…
-
ASTM-D2494 2020
D2494-13(2020) Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple…
-
ASTM-D3444 2010
D3444-00(2010)e1 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane Published By Publication Date Number…
-
ASTM-D2244 2015
D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color…
-
ASTM-D2454 2018
D2454-18 Standard Practice for Determining the Effect of Overbaking on Organic Coatings Published By Publication…
-
ASTM-D4444 2013
D4444-13 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters Published By…
-
ASTM-D2449 2020
D2449-88(2020) Standard Specification for Rubber Bales From Natural Sources—Limit on Coating Published By Publication Date…
-
ASTM-D2844 2013
D2844/D2844M-13 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils Published By…
-
ASTM-D4244 2001
D4244-95(2001) Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Acrylonitrile-Butadiene/Poly(Vinyl Chloride) (NBR/PVC) Jackets for Wire and…
-
ASTM-D7444 2018
D7444-18 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics Published By Publication…
-
ASTM-D2944 2013
D2944-13 Standard Practice of Sampling Processed Peat Materials Published By Publication Date Number of Pages…
-
ASTM-D2454 2014(Redline)
D2454-14 Standard Practice for Determining the Effect of Overbaking on Organic Coatings (Redline) Published By…
-
ASTM-D2494 2010(Redline)
D2494-02(2010)e1 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple…
-
ASTM-D3444 2020
D3444-00(2020) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane Published By Publication Date Number…
-
ASTM-D2244 2015(Redline)
D2244-15a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color…
-
ASTM-D3444 2015
D3444-00(2015) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane Published By Publication Date Number…
-
ASTM-D2444 2019(Redline)
D2444-19 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by…
-
ASTM-D2244 2014
D2244-14 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color…
-
ASTM-E2444 2018
E2444-11(2018) Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films Published By Publication Date…
-
ASTM-D2464 2015
D2464-15 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Published By…
-
ASTM-D2442 2020
D2442-75(2020) Standard Specification for Alumina Ceramics for Electrical and Electronic Applications Published By Publication Date…
-
ASTM-F2444 2018
F2444-04(2018) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques…
-
ASTM-D2442 2016
D2442-75(2016) Standard Specification for Alumina Ceramics for Electrical and Electronic Applications Published By Publication Date…
-
ASTM-D7444 2018(Redline)
D7444-18 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics (Redline) Published By…
-
ASTM-D2244 2016
D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color…
-
ASTM-D2494 2010
D2494-02(2010)e1 Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple…
-
ASTM-D2944 2013(Redline)
D2944-13 Standard Practice of Sampling Processed Peat Materials (Redline) Published By Publication Date Number of…
-
ASTM-D2944 2014
D2944-14 Standard Practice of Sampling Processed Peat Materials Published By Publication Date Number of Pages…
-
ASTM-D2448 2019
D2448-85(2019) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of…
-
ASTM-D2484 2000
D2484-00 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape Published By Publication Date Number…
-
ASTM-D2644 2018
D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System Published By Publication Date Number…
-
ASTM-D2244 2015
D2244-15 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color…
-
ASTM-F2444 2012
F2444-04(2012) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques…
