ASTM-D4953 2006

$40.63

D4953-06 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

Published By	Publication Date	Number of Pages
ASTM	2006	8

Guaranteed Safe Checkout

Categories: 75.160.20 - Liquid fuels, ASTM

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

Description

ASTM D4953-06

Historical Standard: Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

ASTM D4953

Scope

1.1 This test method covers and is applicable to gasolines and gasoline-oxygenate blends with a vapor pressure range from 35 to 100 kPa (5 to 15 psi) (see Note 2). This test method, a modification of Test Method D 323 (Reid Method), provides two procedures to determine the vapor pressure (Note 1) of gasoline and gasoline-oxygenate blends. Note 0Because the external atmospheric pressure is counteracted by the atmospheric pressure initially present in the air chamber, this vapor pressure is an absolute pressure at 37.8°C (100°F) in kilopascals (pounds-force per square inch). This vapor pressure differs from the true vapor pressure of the sample due to some small vaporization of the sample and air in the confined space.

Note 0

Vapor pressure of gasoline or gasoline-oxygenate blends below 35 kPa (5 psi) or greater than 100 kPa (15 psi) can be determined with this test method but the precision and bias (Section ) do not apply. For materials with a vapor pressure greater than 100 kPa (15 psi), use a 0 to 200 kPa (0 to 30 psi) gauge as specified in the annex of Test Method D 323.

1.2 Some gasoline-oxygenate blends may show a haze when cooled to 0 to 1°C. If a haze is observed in 9.4, it shall be indicated in the reporting of results. The precision and bias statements for hazy samples have not been determined (see Note 7).

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific warnings are given in 7.5, 8.4.1, 8.5.1, 9.1, A1.1, and A1.1.3.

Keywords

ICS Code

ICS Number Code 75.160.20 (Liquid fuels)

DOI: 10.1520/D4953-06

PDF Catalog

PDF Pages	PDF Title
1	Scope Referenced Documents Terminology
2	Summary of Test Method Significance and Use Apparatus Handling of Test Samples Preparation of Apparatus
3	Procedure FIG. 1
4	Report
5	Precision and Bias
6	A1. APPARATUS FOR VAPOR PRESSURE TEST PROCEDURE A A1.1 Vapor Pressure Apparatus A1.2 Pressure Gauge FIG. A1.1
7	A1.3 Cooling Bath A1.4 Water Bath A1.5 Thermometer A1.6 Mercury Manometer A2. APPARATUS FOR VAPOR PRESSURE TEST PROCEDURE B A2.1 Vapor Pressure Apparatus A2.2 Pressure Gauge A2.3 Cooling Bath A2.4 Water Bath A2.5 Thermometers A2.6 Pressure Measuring Device A2.7 Flexible Coupler A2.8 Vapor Chamber Tube
8	FIG. A2.1

Additional information

Standard Title	D4953-06 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
Published Code	ASTM
Publication Date	2006
Pages Count	8
ICS Codes	75.160.20 - Liquid fuels