ASTM-D6675 2001
$35.75
D6675-01 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
Published By | Publication Date | Number of Pages |
ASTM | 2001 | 3 |
If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]
1.1 This practice is designed to assist procedures to be followed when conducting outdoor exposures to evaluate cosmetic corrosion that might occur in steel panels covered with an organic coating that has been damaged. The outdoor exposures described are based on Practice G7 and include periodic wetting of the test specimens with a salt solution.
1.2 The methods of preparing test specimens and the particular exposure requirements of materials are beyond the scope of this practice.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Title | D6675-01 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
---|---|
Published Code | ASTM |
Publication Date | 2001 |
Pages Count | 3 |
ICS Codes | 43.040.60 - Bodies and body components |
This document does not provide a preview.
Related products
-
ASTM-D6657 2001
D6657-01 Standard Test Method for pH of Wet Blue Published By Publication Date Number of…
-
ASTM-D6674 2001
D6674-01 Standard Guide for Proficiency Test Program for Fabrics Published By Publication Date Number of…
-
ASTM-D6676 2001
D6676-01 Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using…
-
ASTM-D4675 2006
D4675-06e2 Standard Guide for Selection and Use of Flat Strapping Materials Published By Publication Date…
-
ASTM-D6775 2002
D6775-02e1 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided…
-
ASTM-D6665 2001
D6665-01 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling…
-
ASTM-D6625 2001
D6625-01 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a…
-
ASTM-D3675 2001
D3675-01 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat…
-
ASTM-D6677 2007
D6677-07 Standard Test Method for Evaluating Adhesion by Knife Published By Publication Date Number of…
-
ASTM-D6672 2008(Redline)
D6672-08 Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines (Redline)…
-
ASTM-D6475 2006(Redline)
D6475-06 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets (Redline)…
-
ASTM-D6657 2006
D6657-01(2006) Standard Test Method for pH of Wet Blue Published By Publication Date Number of…
-
ASTM-D6670 2007
D6670-01(2007) Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products Published…
-
ASTM-D6673 2010
D6673-10 Standard Practice for Sewn Products Pattern Data Interchange-Data Format Published By Publication Date Number…
-
ASTM-D6675 2006
D6675-01(2006) Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet…
-
ASTM-D6685 2001
D6685-01 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed…
-
ASTM-D6657 2008
D6657-08 Standard Test Method for pH of Wet Blue Published By Publication Date Number of…
-
ASTM-D6655 2001
D6655-01 Standard Terminology Relating to Mechanical Pump Dispensers Published By Publication Date Number of Pages…
-
ASTM-D6645 2001
D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry Published By…
-
ASTM-D6672 2006
D6672-06 Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines Published…
-
ASTM-D6475 2000
D6475-00 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets Published…
-
ASTM-D5675 2010
D5675-04(2010) Standard Specification for Fluoropolymer Micropowders Published By Publication Date Number of Pages ASTM 2010…
-
ASTM-D6635 2001
D6635-01 Standard Test Method for Performing the Flat Plate Dilatometer Published By Publication Date Number…
-
ASTM-D6665 2009
D6665-09 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling…
-
ASTM-D6674 2009
D6674-01(2009) Standard Guide for Proficiency Test Program for Fabrics Published By Publication Date Number of…
-
ASTM-D6765 2008
D6765-02(2008) Standard Practice for Live Staking Published By Publication Date Number of Pages ASTM 2008…
-
ASTM-D6975 2004
D6975-04 Standard Test Method for Cummins M11 EGR Test Published By Publication Date Number of…
-
ASTM-D6625 2007
D6625-01(2007) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a…
-
ASTM-D6695 2003
D6695-03b Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings Published By Publication Date…
-
ASTM-D6695 2008
D6695-08 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings Published By Publication Date…
-
ASTM-D4675 2003
D4675-03 Standard Guide for Selection and Use of Flat Strapping Materials Published By Publication Date…
-
ASTM-D6675 2011
D6675-01(2011) Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet…
-
ASTM-D6075 2010(Redline)
D6075-00(2010) Standard Test Method for Cracking Resistance of Leather (Redline) Published By Publication Date Number…
-
ASTM-D6676 2001
D6676-01e1 Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using…
-
ASTM-D6672 2001
D6672-01 Standard Practice for Formatting Cutting Data to Drive Numerically Controlled Fabric Cutting Machines Published…
-
ASTM-D3675 2008
D3675-08 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat…
-
ASTM-D6775 2007
D6775-02(2007) Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided…
-
ASTM-D3675 2021
D3675-21a Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat…
-
ASTM-D6677 2001
D6677-01 Standard Test Method for Evaluating Adhesion by Knife Published By Publication Date Number of…
-
ASTM-D6670 2001
D6670-01 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products Published…