ASTM-D7592 2010
$40.63
D7592-10 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
| Published By | Publication Date | Number of Pages |
| ASTM | 2010 | 7 |
1.1 This specification covers formulating specifications for purchases of aviation gasoline under contract and is intended primarily for use by purchasing agencies.
1.2 This specification defines a specific type of aviation gasoline that contains no lead. It does not include all gasolines satisfactory for reciprocating aviation engines. Certain equipment or conditions of use may permit a wider, or require a narrower, range of characteristics than is shown by this specification.
1.3 This specification, unless otherwise provided, prescribes the required properties of unleaded aviation gasoline at the time and place of delivery.
1.4 The current purpose for the fuel specified herein is for certification and testing of an engine and engine components.
1.5 The UL94 standard is to be used for engine calibration and FAA certification.
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents |
| 2 | Terminology Classification Materials and Manufacture Detailed Requirements Workmanship, Finish and Appearance |
| 3 | Sampling Reports Test Methods TABLE 1 |
| 4 | Keywords X1. PERFORMANCE CHARACTERISTICS OF UNLEADED AVIATION GASOLINE X1.1 Introduction X1.2 Combustion Characteristics (Antiknock Quality and Antiknock Compound Identification) TABLE X1.1 |
| 5 | X1.3 Fuel Metering and Aircraft Range X1.4 Carburetion and Fuel Vaporization |
| 6 | X1.5 Corrosion of Fuel System and Engine Parts X1.6 Fluidity at Low Temperatures X1.7 Fuel Cleanliness, Handling and Storage Stability X1.8 Miscellaneous Tests X1.9 General |
Related products
-
ASTM-D7292 2012
D7292-12 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) Published By…
-
ASTM-D5592 2010
D5592-94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics Published By Publication…
-
ASTM-D7592 2015(Redline)
D7592-15a Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel…
-
ASTM-D7582 2015(Redline)
D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis…
-
ASTM-D7572 2015
D7572-15 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7392 2013
D7392-07(2013) Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with…
-
ASTM-D7582 2012(Redline)
D7582-12 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis…
-
ASTM-D7592 2015
D7592-15 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel…
-
ASTM-D7594 2019(Redline)
D7594-19 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian…
-
ASTM-D7542 2015(Redline)
D7542-15 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime…
-
ASTM-D7594 2016
D7594-16 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian…
-
ASTM-D4592 2017
D4592-12(2017) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life Published By…
-
ASTM-D7594 2010
D7594-10 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian…
-
ASTM-D7597 2017
D7597-16(2017) Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid,…
-
ASTM-D7292 2012(Redline)
D7292-12 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI) (Redline) Published…
-
ASTM-D7392 2020(Redline)
D7392-20 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with…
-
ASTM-D7596 2010
D7596-10 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using…
-
ASTM-D7592 2014
D7592-14 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel…
-
ASTM-D7599 2016
D7599-16 Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by…
-
ASTM-D5792 2010(Redline)
D5792-10 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of…
-
ASTM-D7572 2011
D7572-11a Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D7572 2015(Redline)
D7572-15 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D4592 2001
D4592-01 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life Published By…
-
ASTM-D7582 2010
D7582-10e1 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis…
-
ASTM-D7597 2016
D7597-16 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid,…
-
ASTM-D7590 2014
D7590-09(2014) Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils…
-
ASTM-D7599 2016(Redline)
D7599-16 Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by…
-
ASTM-D7596 2014(Redline)
D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using…
-
ASTM-D7572 2011(Redline)
D7572-11a Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil…
-
ASTM-D5592 2018
D5592-94(2018) Standard Guide for Material Properties Needed in Engineering Design Using Plastics Published By Publication…
-
ASTM-D7392 2020
D7392-20 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with…
-
ASTM-D7552 2014
D7552-09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using…
-
ASTM-D7594 2016(Redline)
D7594-16 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian…
-
ASTM-D7582 2015
D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis…
-
ASTM-D7592 2015
D7592-15a Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel…
-
ASTM-D5792 2010
D5792-10 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of…
-
ASTM-D4592 2012
D4592-12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life Published By…
-
ASTM-D7599 2017
D7599-16(2017) Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by…
-
ASTM-D7582 2010
D7582-10 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis…
-
ASTM-D7597 2016(Redline)
D7597-16 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid,…
