ASTM-F2378 2005
$40.63
F2378-05 Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
| Published By | Publication Date | Number of Pages |
| ASTM | 2005 | 6 |
1.1 This test method covers a means of evaluating the sealing properties of sheet, composite, and solid form-in-place gasket materials (see Classification F 104 or F 868) at room temperature, and may be used for fluid (gas or liquid) leak rate measurements. It utilizes relatively short hold times and is not intended to predict long-term performance in application.
1.2 This test method is suitable for evaluating the sealing characteristics of a gasket material under different press loads by measuring the leakage rate. This test method may be used as an acceptance test when the producer and user have agreed to specific test conditions for the following parameters: (1) test medium, (2) internal pressure of the medium, (3) press load on the gasket specimen, and (4) the surface finish of the platens.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology Summary of Test Method |
| 2 | Significance and Use Apparatus Reagents and Materials FIG. 1 |
| 3 | Hazards Sampling, Test Specimens, and Test Units Preparation of Apparatus Calibration and Standardization Conditioning Procedure |
| 4 | Calculation or Interpretation of Results Report Precision and Bias Keywords |
| 5 | X1. Sealability Sample Data Sheet |
Related products
-
ASTM-F2376 2008
F2376-08 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems Published…
-
ASTM-F2078 2015
F2078-15 Standard Terminology Relating to Hydrogen Embrittlement Testing Published By Publication Date Number of Pages…
-
ASTM-F2374 2007
F2374-07a Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices Published By…
-
ASTM-F2376 2007
F2376-07 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems Published…
-
ASTM-D2378 2007
D2378-07 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and…
-
ASTM-F2328 2005
F2328-05 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel…
-
ASTM-F2373 2005
F2373-05 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months…
-
ASTM-F2373 2005
F2373-05e1 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months…
-
ASTM-F2388 2009
F2388-09 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use Published By Publication…
-
ASTM-F2338 2007
F2338-07 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method…
-
ASTM-F2338 2005
F2338-05 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method…
-
ASTM-F2387 2004
F2387-04 Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and…
-
ASTM-F2388 2009(Redline)
F2388-09 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use (Redline) Published By…
-
ASTM-F2370 2015
F2370-15 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin…
-
ASTM-F2388 2004
F2388-04e1 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use Published By Publication…
-
ASTM-F2078 2008
F2078-08 Standard Terminology Relating to Hydrogen Embrittlement Testing Published By Publication Date Number of Pages…
-
ASTM-F2372 2015(Redline)
F2372-15 Standard Consumer Safety Performance Specification for Shopping Carts (Redline) Published By Publication Date Number…
-
ASTM-F2078 2008
F2078-08a Standard Terminology Relating to Hydrogen Embrittlement Testing Published By Publication Date Number of Pages…
-
ASTM-F2374 2007
F2374-07 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices Published By…
-
ASTM-F2358 2004
F2358-04 Standard Guide for Measuring Characteristics of Sapphire Substrates Published By Publication Date Number of…
-
ASTM-F2778 2009
F2778-09 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means…
-
ASTM-F2328 2004
F2328-04 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel…
-
ASTM-F2373 2008
F2373-08 Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months…
-
ASTM-F2388 2008
F2388-08 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use Published By Publication…
-
ASTM-F2078 2007
F2078-07 Standard Terminology Relating to Hydrogen Embrittlement Testing Published By Publication Date Number of Pages…
-
ASTM-F2388 2006
F2388-06 Standard Consumer Safety Specification for Baby Changing Tables for Domestic Use Published By Publication…
-
ASTM-D2378 2002
D2378-02 Standard Specification for Formaldehyde 50% Grade Uninhibited and 37% Grade Inhibited and Uninhibited Published…
-
ASTM-F2078 2008(Redline)
F2078-08a Standard Terminology Relating to Hydrogen Embrittlement Testing (Redline) Published By Publication Date Number of…
-
ASTM-F2338 2009(Redline)
F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method…
-
ASTM-F2368 2004
F2368-04 Standard Specification for Labeling for Wet Mops for Consumer and Institutional Use Published By…
-
ASTM-F2348 2004
F2348-04 Standard Performance Specification for Privacy Padlocks Published By Publication Date Number of Pages ASTM…
-
ASTM-E2378 2005
E2378-05 Standard Practice for the Recognition of Impaired or Retired Personal Property Published By Publication…
-
ASTM-F2398 2004
F2398-04e1 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a…
-
ASTM-F2374 2006
F2374-06 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices Published By…
-
ASTM-F2398 2004
F2398-04 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a…
-
ASTM-F2278 2003
F2278-03 Standard Test Method for Evaluating Paintball Barrier Netting Published By Publication Date Number of…
-
ASTM-F2376 2008(Redline)
F2376-08 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems (Redline)…
-
ASTM-F2370 2005
F2370-05 Standard Test Method for Measuring the Evaporative Resistance of Clothing Using a Sweating Manikin…
-
ASTM-F2078 2001
F2078-01 Standard Terminology Relating to Hydrogen Embrittlement Testing Published By Publication Date Number of Pages…
-
ASTM-F2338 2004
F2338-04 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method…
