ASTM-F2633 2007
$40.63
F2633-07 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
| Published By | Publication Date | Number of Pages |
| ASTM | 2007 | 5 |
1.1 This specification covers the requirements for wrought nickel-titanium shape memory alloy tube, nominally 54.5 % to 57.0 mass/mass (weight) % nickel, in the superelastic condition, used for the manufacture of medical devices and surgical implants. Material shall conform to the applicable requirements of Specification F 2063. This specification addresses those product variables that differentiate drawn medical grade tube from the raw material and mill product forms covered in Specification F 2063.
1.2 This specification applies to tube with 10 mm (0.4 in.) and smaller nominal outside diameter and 2 mm (0.08 in.) and thinner nominal wall thickness.
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses (inch-pound units) are for information only.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 1 | Scope Referenced Documents Terminology |
| 2 | Ordering Information Materials and Manufacture Chemical Composition Austenite Finish Temperature TABLE 1 TABLE 2 TABLE 3 |
| 3 | Mechanical Properties Permissible Variation in Dimensions Permissible Outer and Inner Surface Imperfections Certification Quality Program Requirements Keywords |
| 4 | X1. RATIONALE X1.1 X1.2 X1.3 X1.4 X1.5 X1.6 X1.7 X1.8 X1.9 |
| 5 | X1.10 X2. BIOCOMPATIBILITTY X2.1 |
Related products
-
ASTM-F2433 2009
F2433-05(2009) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness Published By Publication Date Number…
-
ASTM-F2643 2009(Redline)
F2643-09 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks (Redline) Published By Publication…
-
ASTM-F2363/F2363M 2017(Redline)
F2363/F2363M-17 Standard Specification for Sewage and Graywater Flow Through Treatment Systems (Redline) Published By Publication…
-
ASTM-F2636 2008
F2636-08 Standard Practice for Commercial Unmanned Aircraft System (UAS) Pilot Practical Test Standards for Unmanned…
-
ASTM-F2733 2009
F2733-09 Standard Specification for Flame Resistant Rainwear for Protection Against Flame Hazards Published By Publication…
-
ASTM-F2233 2009
F2233-03(2009) Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber…
-
ASTM-F2623 2007
F2623-07 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing Published By Publication…
-
ASTM-F2033 2000
F2033-00a Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of…
-
ASTM-F2663 2007
F2663-07a Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR…
-
ASTM-F2603 2006
F2603-06 Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds Published By Publication Date Number…
-
ASTM-F2433 2005
F2433-05 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness Published By Publication Date Number…
-
ASTM-F2632 2007
F2632-07 Standard Practice for Determining the Toner Usage for Color Printer Cartridges Published By Publication…
-
ASTM-F2623 2008
F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing Published By Publication…
-
ASTM-F2638 2007
F2638-07 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging…
-
ASTM-F2363/F2363M 2017
F2363/F2363M-17 Standard Specification for Sewage and Graywater Flow Through Treatment Systems Published By Publication Date…
-
ASTM-F2639 2007
F2639-07e1 Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems Published By…
-
ASTM-F2639 2007
F2639-07 Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems Published By…
-
ASTM-F2663 2007(Redline)
F2663-07a Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR…
-
ASTM-F2643 2007
F2643-07 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks Published By Publication Date…
-
ASTM-F2663 2007
F2663-07 Standard Test Method for Bead Unseating of Tubeless Tires for Motor Vehicles with GVWR…
-
ASTM-F2363 2004
F2363-04 Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex…
-
ASTM-F2533 2007
F2533-07 Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels Published By…
-
ASTM-F2634 2007
F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact…
-
ASTM-F2630 2007
F2630-07 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates Published By Publication Date Number of Pages ASTM…
-
ASTM-F2333 2017
F2333-04(2017) Standard Test Method for Traction Characteristics of the Athletic Shoe-Sports Surface Interface Published By…
-
ASTM-F2333 2004
F2333-04 Standard Test Method for Traction Characteristics of the Athletic Shoe-Sports Surface Interface Published By…
-
ASTM-F2033 2005
F2033-05 Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of…
-
ASTM-F2733 2017
F2733-17 Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards Published By Publication Date…
-
ASTM-F2363 2006
F2363-06 Standard Specification for United States Coast Guard Type II or IMO MARPOL 73/78 Annex…
-
ASTM-F2635 2007
F2635-07 Standard Classification for Unmanned Aircraft Pilot Certification Published By Publication Date Number of Pages…
-
ASTM-F2673 2008
F2673-08 Standard Safety Specification for Special Tip-Resistant Movable Soccer Goals Published By Publication Date Number…
-
ASTM-F2233 2003
F2233-03 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber…
-
ASTM-D2633 2002
D2633-02 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable Published By…
-
ASTM-F2683 2017
F2683-11(2017) Standard Guide for Selection of Booms for Oil-Spill Response Published By Publication Date Number…
-
ASTM-F2643 2009
F2643-09 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks Published By Publication Date…
-
ASTM-F2733 2017(Redline)
F2733-17 Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards (Redline) Published By Publication…
-
ASTM-F2623 2008(Redline)
F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing (Redline) Published By…
-
ASTM-F2653 2007
F2653-07 Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders Published…
-
ASTM-D2633 2008
D2633-08 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable Published By…
-
ASTM-F2833 2017
F2833-11(2017) Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum…
