BSI PD CEN/TS 16811-3:2015
$167.15
Winter maintenance equipment. De-icing agents – Other solid and liquid de-icing agents. Requirements and test methods
| Published By | Publication Date | Number of Pages |
| BSI | 2015 | 44 |
This Technical Specification defines general specifications and performance criteria of other solid and liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to products, which are used with their particular properties for specific uses in winter service on roads and other traffic areas, with the exception of runways and parking areas of aircrafts. It establishes the test methods to control them. The products include inorganic and organic de-icing agents, and mixtures of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic components which are intended for special properties like inhibition of corrosion, enhanced melting capacity or improved spreading pattern.
This Technical Specification defines specifications and performance criteria and offers for each a variation in the form of classes of requirements. This does not mean that there are products likely to respond to all the classes and criteria of the standard. Therefore, when defining the demand the user needs to make sure prior the appropriateness of his choice and the availability of suitable products.
PDF Catalog
| PDF Pages | PDF Title |
|---|---|
| 4 | Contents Page |
| 5 | European foreword |
| 6 | Introduction |
| 7 | 1 Scope 2 Normative references |
| 9 | 3 Terms and definitions 4 Requirements and test methods 4.1 General 4.2 De-icing performance 4.2.1 General 4.2.2 Nancy-Test 4.2.3 Inzell-Test (informative) |
| 10 | 4.2.4 Freezing curve 4.3 Slip resistance |
| 11 | 4.4 Heavy metals and hydrocarbons 4.5 pH 4.6 Sulphate 4.7 Corrosiveness |
| 12 | 4.8 Flash point 4.9 Biodegradability |
| 13 | 4.10 Water insoluble matter 4.11 Kinematic viscosity 4.12 Conductivity 4.13 Bulk density 4.14 Density 4.15 Requirements for additives and mixtures |
| 14 | 4.16 Material safety data sheet 4.17 Marking, transport, handling and storage 4.17.1 Labelling of packaged products 4.17.2 Information on delivery notes 4.17.3 Transport, handling and storage |
| 15 | 4.18 Public health and environment 4.19 Product description 5 Sampling |
| 16 | Annex A (normative) Product description for other solid and liquid de-icing agents |
| 19 | Annex B (normative) Sampling B.1 Solid form B.1.1 Package shipments B.1.2 Bulk shipments B.2 Liquid form B.3 Labelling and distribution of samples |
| 20 | B.4 Sampling report |
| 21 | Annex C (normative) Test methods C.1 Determination of de-icing performance (Nancy-Test) C.1.1 Scope C.1.2 References C.1.3 Principle C.1.4 Equipment C.1.4.1 Plexiglas test dish |
| 22 | C.1.4.2 Plexiglas cover plate C.1.4.3 Disc for surface finishing C.1.4.4 Cold chamber C.1.5 Auxiliary equipment C.1.5.1 Analytical balance C.1.5.2 Usual laboratory device |
| 23 | C.1.6 Procedure C.1.6.1 Preparation of the ice sheet C.1.6.2 The sample C.1.6.2.1 Solid products C.1.6.2.2 Liquid products C.1.6.3 Test |
| 24 | C.1.7 Expression of results C.1.7.1 Immediate melting performance (PFI) C.1.7.2 Efficient melting performance (PFE) |
| 25 | C.1.7.3 Expression of results C.1.8 Test report C.1.9 Accuracy of measurement |
| 26 | C.2 Determination of slip resistance C.2.1 Scope C.2.2 References C.2.3 Principle C.2.4 Equipment C.2.4.1 The reference test surfaces C.2.4.2 The test product C.2.5 Procedure C.2.5.1 Determination of coefficient of friction of the SRT reference surface in the presence of de-mineralized water |
| 27 | C.2.5.2 Determination of coefficient of friction SRT1 of the reference surface in the presence of product C.2.5.3 Specific operating instructions C.2.6 Expression of results C.2.7 Test report |
| 28 | C.2.8 Accuracy of measurement C.3 Determination of corrosiveness C.3.1 Scope C.3.2 Principle C.3.3 Preparation of test specimens C.3.3.1 General C.3.3.2 Processing specimens C.3.3.3 Initial treatment of the surfaces of specimens C.3.3.3.1 Test piece in steel and aluminium |
| 29 | C.3.3.3.2 Galvanized steel test piece C.3.4 Preparation of test products C.3.4.1 Test solutions C.3.4.2 Volume of the test product relative to the volume of the immersed sample C.3.5 Specific test device C.3.6 Procedure |
| 30 | C.3.6.1 Preparation for the test C.3.6.2 Test C.3.6.3 Final treatment of the surfaces of specimens C.3.6.3.1 Steel test pieces C.3.6.3.2 Galvanized test pieces and aluminium C.3.7 Expression of results |
| 31 | C.3.8 Accuracy of measurement C.3.9 Densities of the three reference metals C.4 Determination of water insoluble matter C.4.1 Scope C.4.2 Principle C.4.3 Solid products C.4.3.1 General C.4.3.2 Preparation of the solution C.4.3.3 Preparation of the filter |
| 32 | C.4.3.4 Filtration C.4.3.5 Expression of the result C.4.4 Liquid products C.4.4.1 General C.4.4.2 Preparation of the solution C.4.4.3 Preparation of the filter |
| 33 | C.4.4.4 Filtration C.4.4.5 Expression of the result C.4.5 Accuracy of measurement |
| 34 | Annex D (informative) Determination of de-icing performance (Inzell-Test) D.1 Scope D.2 Principle D.3 Equipment |
| 35 | D.4 Procedure D.4.1 Sample dividing and drying D.4.2 Sample sieving D.4.3 Preparation of test samples D.4.4 Preparation of ice sheets |
| 36 | D.4.5 De-icing test D.5 Expression of results |
| 37 | Annex E (informative) Transport, handling and storage E.1 Transport E.2 Handling operations, storage |
| 38 | Annex F (informative) Technical aspects of durability of concrete |
| 39 | Annex G (informative) Test results with the chlorides of sodium, calcium and magnesium G.1 De-icing performance G.1.1 Results with the Nancy-Test G.1.2 Results with the Inzell-Test |
| 40 | G.2 Slip resistance |
| 41 | G.3 Corrosiveness |
| 42 | Bibliography |
